Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
ANNE M - May 24, 2018
Verified Purchase
Easy to order, cooktop repair.
The part was in great condition and arrived in good time and it’s been installed and the burner is working great! Thank you,
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Remove 6 screws, lift off glass, unplug burned out burner, plug in new burner, reverse order to put back together.
As above.
Richard from HALLSTEAD, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner not heating
Took glass with both burners out as a single unit. Removed six screws to remove the pan from the glass top to get to the burners. Wires were easily disconnect from old unit. Replaced wires on new unit then putting the screws from old unit on new unit so the unit would fit properly back in the tub. Really really easy. Thanks
John from KENT, NY
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
6" burner on the radiant surface started smoking and burned out.
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit.
... Read more Place new unit in between the three guides. Make sure the other unit is aligned also. Place glass top back unto unit and replace the 7 screws. Put unit back into stove top and test. Finished in less than 15 minutes with no issues.
Read less
Johnny from Henderson, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
24 of 37 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vicki
June 5, 2019
I’d like to know what size diameter the elements are (the small one) (the large one) for this model cooktop
For model number RCM30DB13
Hello Vicki, thank you for your question. On your model the Surface Element part PS11764910 is 6" in diameter, and the Surface Element part PS11764903 is 8" in diameter.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sylvain
February 17, 2020
Hi, i have a jenn air jed8230ads stainless, i need an element for it, it's the bigger one. Do you have this parts in stock?
For model number Jenn air JED8230ADS stainless
Hi Sylvain. Sadly we do not have it in stock. This is part number WPW10310263. Thank you for your question and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
June 24, 2022
I need to replace the 8 inch element in my Jenn Air range. The model # listed on the back of the defective part is 200N8-L6387R. Part # 7406P279-60. 1800 W, 240V. Is this part #W1082370 the correct replacement element, or can you tell me the correct replacement. Thank you
For model number JEA8120adb
Hi Bob,
Thank you for your question. The part number listed under your model number for the 8 inch element is PS11764903. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Hi the small one is not working. Does this part match with my burner? Thanks
For model number JED8345ADB15
Hello Key, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the Box Cartridge the Elements are in. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
