16743374-1-M-GE-WH11X34740-PUMP
Part Location Diagram of WH11X34740 GE PUMP
See part 249 in the diagram
( Grid squares measure 1x1 inch )
16743374-1-S-GE-WH11X34740-PUMP 16743374-2-S-GE-WH11X34740-PUMP Part Location Diagram of WH11X34740 GE PUMP
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

PUMP WH11X34740

★★★★★
★★★★★
4 Reviews

Rated by 5 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 93.26
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS16743374
Manufacturer Part Number WH11X34740
Manufactured by GE
Product Description

PUMP Specifications

The drain pump removes water from the washer during the drain portion of the cycle.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not drain
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH11X34740 replaces these:
WH23X10038, WH23X20825, WH23X25461, WH23X25518
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carolann M - July 12, 2023
  Verified Purchase
perfect
the repair man that I called told me he probably would not be able to find the part. got on line found the part with my model and serial number, received the part within a week and took me about 15 minutes to install. Having the utube video attached to the part was wonderful!
★★★★★
★★★★★
JEFFREY L O - December 6, 2021
  Verified Purchase
waas exactly what i needed to repair my waasher
the washer pump was brand new and fit ,working great. wife thought we were going to have to buy a new washer. I saved the cost of a new washer and with Christmas right here now we are going to be able to have money left for Christmas gifts for our family too. thank you for both
★★★★★
★★★★★
Patrick L - October 20, 2021
  Verified Purchase
easy
fit great except wiring was slightly different but still obvious to plug correctly....works great so far.....finding my part and ordering is always a breeze on PS!!! Since appliances dont last like they used to, I keep my magnetic Part Select card on my fridge handy. We used to by a fridge or washer and dryer and it lasted 25 or more years and even more for a stove and an oven! I gave away my perfect working 30 year old fridge when I got my new one 10 years ago and I have had to replace the mother board in it 3 times at $200 a pop and a fan and a water valve and it is stilla shitty fridge that freezes produce unexpectedly no matter where you place it inside and when it is set at the highest temp you dare keep your dairy at.Not to mention the icemaker drips and gets clogged and is really bad at dispensing ice or water! My 10 yr old dryer has been apart 5 or 6 times for parts and belts. My 10 yr old washer that has never adequately cleaned clothes has to be unplugged when it has a mind fart and this pump is its only replacement but remember it is only 10. My 8 yr old oven and stove cant hold a temperature and baking is nearly impossible while the outside is falling apart much like my washer and dryer are.
★★★★★
★★★★★
Mary Lee D - May 31, 2018
  Verified Purchase
Exactly what I needed.
The part was exactly what was needed to fix my washer and I was able to get it before the repairman from GE was able to get it through his supplier. Thank you.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Drain pump replacement
utube video made this repair very easy! remove front lower cover, drain pump will be on the right, 2 screws hold pump in place (unscrew), remove hoses by using plyers to slap hoses off pump, remove old pump. replace with new one, screw back in, replace hose & claps. DONE!! i ran a rinse and drain cycle before replacing the front cover just to be sure there were no leaks.
Read less
  • Carolann from MOSCOW, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer drain pump wasn't working properly
Was so easy to replace the part first take out the lower front cover and then couple screws and also two clamps then assembly back on the same order tested and finished
  • Josefa m from PANORAMA CITY, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stopped at 10 minutes and wouldn't spin/drain water.
Removed top of washer. Three screws.
Removed control panel. Three screws.
Removed spring loaded ring which seals washer rubber gasket and door assembly. Disconnect door interlock connectors.
Removed front panel which includes door assembly. Three screws.
Access to pump is on lower shelf. Remove connectors from pump assembly. Remove clamps on two pump inlet/outlet hoses. Remove two screws holding pump assembly.
Install new pump assembly in reverse,
Read less
  • Orville from GREEN CV SPGS, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer stopped during wash cycle and wouldn't open.
Removed three 7mm sheet metal screws from the bottom front panel.
The drain pump is in the front right.
Removed the manual drain screen to drain residual water from the system. A bucket was necessary to collect all the water.
Disconnected the inlet and outlet hose.
Disconnected the electric supply.
Removed two Phillips screws holding the pump to the bottom of the machine.
Slid the pump towards the rear to clear the support pegs and removed it from the front opening.
Installation is the reverse of those steps.
Read less
  • Jason from HARRIMAN, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not spinning out. Laundry still real wet, washer would not turn off, just Pause\Start button blinking.
Pulled off the front. Had to feel around to find how pump was attached. Detached it and popped in new one. Would be better if there was more visibility in area.
  • Barbara from SURF CITY, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Glenn
August 15, 2022
New pump housing mounting screw tabs are slightly different. can I can pump to the old housing
For model number GFWS1700H0WW
PartSelect logo
Hello Glenn, thank you for your inquiry. It looks like the original pump was replaced with this new one, it should fit and function the same as the old one. However, to confirm installation checking with the manufacturer or specific installation instructions, we have included a video for part installation similar to yours. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16743374
Manufacturer Part Number: WH11X34740
Brand
Model Number
Description
General Electric
GFW400SCK0WW
Washer - WASHER
General Electric
GFW400SCM0WW
Washer
General Electric
GFW450SPK0DG
Washer - WASHER
General Electric
GFW450SSM1WW
Washer
General Electric
JCB730DF3BB
Range - Range
General Electric
YFW450SPM1DG
Washer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
PUMP
$ 93.26
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.