Maytag/Maytag_Thumb/52639.gif
See part 5 in the diagram
Replacing your Maytag Range Dual Radiant Element with Limiter play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Dual Radiant Element with Limiter

★★★★★
★★★★★
2 Reviews
$ 162.43   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your MER6770AAW Range!
 Fits your MER6770AAW Range!
PartSelect Number PS11759488
Manufacturer Part Number W10823709
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop, Microwave Oven Combo.
This part works with the following products:
Maytag, Jenn-Air, Kenmore, Crosley.
Part# W10823709 replaces these:
AP6030109, 12002144, 12002149, 71002253, 74004556, 74007227, 74008570, 74008576
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

11 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
December 11, 2018
Trouble with stove element. Model number mer6872baw. The dual element won’t stay on. It comes on for about 8-10 seconds and then goes off. I have tried replacing the element and the switch. All the other burners work. Any ideas?
For model number MER6872BAW
Hi Steve, thank you for your question. If you have replaced both the element and the switch already then the only other thing that we could think of would be that there is a wiring issue inside of your appliance. You may want to check to see if there is any damage to the wiring between the element and the switch. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Laura
January 21, 2019
My Kenmore smoothtop cooktop right front dual burner control no longer works it seems to have disconnected/broken away from the rest of the heating element mechanism. Do i need to replace the entire element to reconnect?
For model number 629-45776
Hello Laura, thank you for your question. Yes, If the limiter on the element has broken away from the element itself, you would have to replace the entire dual burner element. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Lynette
December 1, 2019
Oven element is broken. And dual right side burners don’t work. What parts and how to change them?
For model number JES9800AAB
Hello Lynette, Thank you for your question. There are two elements for your oven the bottom baking element under part PS11744404 and the upper broiling element under part PS2081246. As for the surface burner, yours is under part PS11759488 for your model, and when installing these parts, refer to our sites resources on each parts page for installation, there are videos and written guides to help install the parts. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Tim Mer
December 5, 2019
The upper oven lower bake element will not heat up. I replaced it with a new one from partselect and it still will not heat up. The broil element heats up. Which part controls the current to the lower bak element?
For model number MER6772BAS
Hi Tim, Thank you for your question. If the bake element is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If is not is not the sensor, you will need to check the bake element, the electronic control board and the wiring between the parts to see which one is causing the issue. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Denise
February 4, 2020
The small burner on the dual choice element is not working. Does the whole cooktop need to be replaced?
For model number JED8430ADB
Hello, Thank you for your question. This will either be an issue with the element or the burner switch. You can test both parts with a multi meter and check for continuity. We hope this helps.

Was this helpful?
Thank you for voting!
Artur
May 22, 2019
What is the diameter of this element w10823709
For model number mer6772BCS
Hello Artur, Thank you for the question. This is a 9" Element. Hope this helps!

Was this helpful?
Thank you for voting!
Stuart
May 24, 2019
Dear sir, Both the left back and right front 8 inch dual element burners for our jenn air jes 9800 electric glass top stove only operate at high, even when turned to a lower temperature. The switches have been replaced. Do i need to replace the dual element burners with limiters to make it operate at a medium or low heat setting?
For model number Jenn Air JES9800 AWW
Hi Stuart, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Todd
September 27, 2019
Partselect number ps11759488. The inner coil on my right front burner does not heat regardless of the switch position. Since others have complained about this part not fitting their stove, i'd like to very compatibility with mine before purchasing.
For model number MER5730BAQ
Hello Todd, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11759488. Hope this helps!

Was this helpful?
Thank you for voting!
John
January 8, 2019
Right front dual burner stays high when control knob set to lower settings.
For model number JES9800AAB
Hello John, thank you for your question. The most likely issue is the switch PartSelect Number PS2003583 that controls the burner. We would recommend replacing that part and if that doesn't fix the issue you would replace the element itself. You can also test the switch before ordering to be sure it is bad. This link will help you with the testing process. https://www.partselect.com/Range-Stove-Oven+Infinite-Switch-Testing+repair.htm I hope this helps!

Was this helpful?
Thank you for voting!
Michelle
October 19, 2017
I need the outer burner coil -for the right front burner.Only the outer coil is out -the inner burner coil still works. I would like a Jenn air part and part #
For model number JES9800AAS
Hi Michelle, Thank you for the question. The coils are not meant to come apart so the element is sold as one piece. PartSelect Number PS11759488, Manufacturer Part Number W10823709. Hope this helps!

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Maytag Range Dual Radiant Element with Limiter

Replacing your Maytag Range Dual Radiant Element with Limiter play video
Customer Repair Stories
 Average Repair Rating: 2.7 / 5.0, 9 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Outer Ring of Dual Radiant Burner Does Not Come On
    Undid two screws on underside of cook top, lifted and exposed underside. Transferred wires from the faulty burner to the new burner, one at a time, paying close attention to their respective position on the wiring posts/terminals. Undid two screws holding old burner and then mounted the new burner to underside of cook top. Was really simple to do. :)
    • Christopher from Fredericksburg, VA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver, Pliers
    41 of 59 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Element did not heat
    Removed stove top. Removed old element paying attention to wiring connections. Installed new element. Redconnected wiring. Put stove top back in place. Tested. Ate dinner.
    • Michael from Lancaster, PA
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers
    20 of 35 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Faulty Element Thermostat
    1)Turn off breaker to range
    1.1)Disconnect the downdraft vent blower
    2)Remove Range from Counter area (delicate procedure)
    Caution do not stress (Lift with or pull on) the cook-top
    3)Remove Ceramic cook-top from base (hidden fasteners-remove the vert trim at front of range - it hides two fasteners)
    4)Remove old elements
    5)Rebuild the supplied elements (multiple options, copy the old element layout before disassembling- tricky)
    6)Swap-out replacement elements (replacement elements were assembled slightly differently in the new style elements so wiring was slightly different)
    7)Re-assemble Ceramic cook-top
    8)Re-mount to base (needs assistant to support ceramic while reconnecting cable harness connector)
    8) Re-set range into counter (Ceramic cook-top is very delicate, so extreme care is required to prevent damage)
    Other Parts Used:
    Element with Limiter 6 Inch - 1200W
    • Steven from Sherwood, OR
    • Difficulty Level:
      Difficult
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Nutdriver, Pliers, Screw drivers
    12 of 21 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    center of duel element burner was not working
    replaced burner by following the wiring from the photo we took. worked god except was cooking to hot and would not cycle. went to use my smaller burner in the back on the same side and the center of the double came on. so we watched another video looked at what we did wrong with the wiring. here we wired the burner slightly wrong we did not follow the numbering. this time followed the numbering and all is good. burner is working good and cycling.
    • Candi from COLUMBIA STA, OH
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Dual radiant broken
    My genius scientist husband responsible all electric string connections, I responsible buy right parts and all support work, we worked as a team and fix the problems:) :)
    • Yi from WOBURN, MA
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers, Socket set
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Inner Element Would Not Heat
    I did not mark wires with their associated numbered connections on the old burner but I did take pictures prior to removing the old burner. This slightly complicated finding the right connections for the wires on the new burner but the photos taken were invaluable in doing so. The placement of burner connections between new and old was different. Additionally, there were 2 connections on new and old that were not numbered. These turned out to be the power to the inner and outer coils and their connections were determined by examining the burners and connecting accordingly. Also, not mentioned in the instructions was a light on the new burner that the old burner did not have. I removed the light and the wire connecting it to the burner and connected the freed new burner connector based on the old/new burner connection numbering. Despite my lack of confidence that I correctly installed the burner, it worked on the first try and I am very happy to have it fully functional again.
    • Todd from STATE COLLEGE, PA
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Nutdriver, Pliers
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    wright frount dual burner did not work
    number to get the correct part was problem. item number was a whirlpool number. all other soureces i could not get the part. part selec t was able to come up the whirlpool item number. when i received the correct part it did not take long repair the problem. thank you for all your help.
    • Freddie L from HOLT, MO
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers
    2 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Burner out
    I didn't repair anything because you sent me the wrong part! I submitted a claim to return it and it's been a week, and I have heard nothing from you. Horrible customer service, I'll be calling today.
    • Daniel from IONE, CA
    • Difficulty Level:
      Very Difficult
    • Total Repair Time:
      More than 2 hours
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Large element on stove top burned out
    The replacement unit was a substitute part. Wiring slightly different. Instructions bare minimum. Follow instructions and it does work. No instructions as to how to remove the stove top. Been there before so sort of knew how. Nothing in the Jenn Air manual for stove top removal. The control panel has to be removed, two screws on each side and four hex screws on bottom, this allows for the disconnect of wiring for the top.
    Remove the two trim pieces one on each side. One screw at top and one at bottom. The trim piece will move towards the rear and come off. Two screws on each side and two in the back will release the top. Remove top and lay on padded surface. You are ready to replace unit.
    • Betty G from MOSCOW, ID
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers, Screw drivers
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      2 Reviews
      1.0
      Filter By Rating:
      • 5 Stars
        0
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        2
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11759488
          Manufacturer Part Number: W10823709
          Brand
          Model Number
          Description
          Kenmore
          62942975
          Cooktop
          Kenmore
          62942975790
          Cooktop
          Kenmore
          62942979
          Cooktop
          Kenmore
          62942979790
          Cooktop
          Kenmore
          62945775
          Range
          Kenmore
          62945776
          Range
          Kenmore
          62945779
          Range
          Kenmore
          62946795
          Range
          Kenmore
          62946796
          Range
          Kenmore
          62946799
          Range
          Jenn-Air
          CCE9300BF
          Cooktop - Electric
          Jenn-Air
          CCE9300BG
          Cooktop - Electric
          Jenn-Air
          CCE9300GG
          Cooktop - Electric
          Jenn-Air
          CCE9300JD
          Cooktop - Electric
          Jenn-Air
          CCE9300PL
          Cooktop - Electric
          Jenn-Air
          CCE9300SL
          Cooktop - Electric
          Jenn-Air
          CCE9300SS
          Cooktop - Electric
          Jenn-Air
          CCE9300TG
          Cooktop - Electric
          Crosley
          CE38800AAQ
          Range - Freestanding, Electric
          Crosley
          CE38800AAS
          Range - Freestanding, Electric
          Crosley
          CE38800AAV
          Range - Freestanding, Electric
          Crosley
          CE38800AAW
          Range - Freestanding, Electric
          Crosley
          CE38800ACS
          Range - Freestanding, Electric
          Crosley
          CE38800ACV
          Range - Freestanding, Electric
          Crosley
          CE38800BAS
          Range - Freestanding, Electric
          Jenn-Air
          CVE3400B
          Cooktop - Electric
          Jenn-Air
          CVE3400W
          Cooktop - Electric
          Jenn-Air
          CVE3401B
          Cooktop - Electric
          Jenn-Air
          CVE3401Q
          Cooktop - Electric
          Jenn-Air
          CVE3401W
          Cooktop - Electric

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service