GE/GE_Thumb/7290AE1E80632A588A62C817E48A47E2ED9F2776.gif
See part 100 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Dryer Timer

★★★★★
★★★★★
12 Reviews
$69.00   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11759041
Manufacturer Part Number WE04X24551
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Timer will not advance
This part works with the following products:
Dryer.
This part works with the following products:
General Electric.
Part# WE04X24551 replaces these:
AP6027534
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    James
    February 24, 2018
    I am needing the timer part where you select the cycle. Is Partselect number ps11759041 and manufacturer part number we04x24551 the right part?
    For model number GTD45EASJ2WS
    Hello James, Thanks for your question. Yes, part number PS11759041 is the timer which is used for your cycles. I hope this helps.

    6 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Kerry
    April 18, 2018
    I just bought this dryer used and the dial won't move from where i set it on the cycle, i.E. More dry, less dry, etc. So it runs indefinitely even after the clothes are very dry. It gets hot and dries the clothes without a problem. I think one time out of about 8 it did seem to work on delicate cycle only. Would this most likely be a faulty timer, thermostat, or sensor? Thank you!
    For model number GTD45GASJ0WS
    Hi Kerry, Thank you for the question. This does sound like an issue with the timer switch,Part Number: PS11759041. The switch is not repairable so it will need to be replaced. Hope this helps!

    6 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Charles
    March 28, 2019
    Ok the dryer was check out by the place i am get it from it's not get hot and the man told me i was not get eney power to the timer
    For model number GTD45EASJ2WS
    Hello Charles, Thank you for the question. I suggest checking the Dryer Board, PartSelect Number PS11772028 and the wiring tot he timer to make sure everything is secure. You may need to replace the timer as well. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Anthony
    February 27, 2020
    Does the timer (part # ps11759041) come with the knob or do I have to buy it separate?
    For model number GTD45EASJ2WS
    Hello Anthony, Thank you for the question. The Timer Knob, PartSelect Number PS11736611 is sold separate from the Timer Switch. We hope this helps.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Kathy
    May 20, 2019
    I have a 2 year old GE dryer and i have noticed the the heat cycle will not advance i can be drying clothes all day if i did not shut it off by opening up the door. Thanks kathy
    For model number GTD45EASJ2WS
    Hi Kathy, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Dee
    November 17, 2019
    Which timer/selector switch do I need to replace factory part tmd1gm29?
    For model number GTD45EASJ2WS
    Hi Dee, the replacement is PS11759041. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 3.2 / 5.0, 4 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        unable to set timer, knob stripped
        Timer was extremely difficult to turn, causing the knob to strip. Unplugged power to dryer.
        Pulled knob off, pulled dryer out to get at the back side, removed the small bolts that hold the back on, pulled back off and let it hang by the ground wire, looked at switch away and saw it was attached by a nut and a torque screw,and two hooks, removed screw and nut, looked at new switch,I put a little oil on the shaft to free it up,and aligned it the same as the old one, took the old one off by sliding it up to clear the hooks and let it hang by the wires, installed new switch with nut and torque screw and hooks. Then looked at the wires on the old switch and transferred each wire one at a time to the same terminal on the new switch. Screw the back on to the dryer, plug power in, move dryer back in place put knob on.
        • Gerald from PITTSBURG, TX
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers, Socket set
        • Parts Used:
          WE04X24551, WE01X24552
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        DRYER TIMER KNOB WOULD NOT MOVE....CRACKED THE KNOW
        REMOVED BACK COVER
        REMOVED THE SCREW HOLDING THE COMPONENT TO THE FRONT
        TOOK PHOTO OF HOW THE COLOR WIRES CONNECT
        REMOVED THE WIRE (TOOK THE LONGEST, HAD TO USE NEEDLE NOSE PLIERS TO BREAK THE TAB FEMALE TAB LOCKS.
        RE-WIRED THE NEW CONTROL
        PUT PLATE BACK ON
        DRY NOW RUNS AS INTENDED
        • James from DOUGLAS, GA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Timer dial failed completely
        Two surprises: (a) after removing two screws, instrument console required a hard whack to slide it back so it would come off; and (b) the timer was held in place by a torx (T-15) screw. The photo I took of the wiring was essential for installing the new timer.
        • Scott from Plymouth, MA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          WE04X24551, WE01X24552
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Knob broke so we were using vise grips to turn with. The stem broke off so we had to replace the timer.
        Took pics of the wiring after taking off back top plate. Found PartSelect on line. Put in part and ordered, quick,easy and simple. They did everything as stated. Put all wires back on and closed up. Tickled pink with PartSelect and will definitely use them again.
        • Margarita from BOSSIER CITY, LA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WE04X24551, WE01X24552
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          12 Reviews
          4.9
          Filter By Rating:
          • 5 Stars
            11
          • 4 Stars
            1
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
          Sort by:
          Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11759041
          Manufacturer Part Number: WE04X24551
          Brand
          Model Number
          Description
          General Electric
          GTD45EASJ0WS
          Dryer - DRYER
          General Electric
          GTD45EASJ1WS
          Dryer - DRYER
          General Electric
          GTD45EASJ2WS
          Dryer - DRYER
          General Electric
          GTD45GASJ0WS
          Dryer - GAS DRYER
          General Electric
          GTD45GASJ1WS
          Dryer - GAS DRYER
          General Electric
          GTD45GASJ2WS
          Dryer - GAS DRYER

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service