This OEM-manufactured metal temperature sensor, or oven probe, measures and regulates the temperature within the oven. If you find that your food is being overcooked, undercooked, or is not cooking evenly, the sensor may be faulty. You can verify this by testing it with a multimeter or looking out for an error code on the control board. If you do not replace the broken sensor, your oven will run too hot or too cold. To replace the sensor, you first need to turn off the power to the oven and let it cool down. Access the probe inside the oven cavity, it is commonly attached to the rear wall. Using a screwdriver or pliers, remove any screws or clips that are securing the sensor in position. You may also need to unscrew or unclip the wire attached to the probe from the back of the oven. This sensor is sold as a single unit.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Oven is too hot | Oven not heating evenly | Little to no heat when baking | Element will not heat
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Javier M - January 22, 2022
Verified Purchase
work as expected
great condition, came fast
★★★★★
★★★★★
Jesse J - June 16, 2021
Verified Purchase
Temp sensors
Double oven is working great with exact match parts.
★★★★★
★★★★★
Carol J - January 6, 2021
Verified Purchase
Wrong part
Returned, waiting for refund.
★★★★★
★★★★★
Florence G - May 25, 2020
Verified Purchase
Temperature Sensor
Exactly what we needed. Received part quickly with easy instructions.
★★★★★
★★★★★
Paul M - November 6, 2018
Verified Purchase
Replace Temperature Sensor
Part received promptly, replaced existing sensor and oven temperature is correct. The connector in the oven doesn't have much slack, so it's a little tricky to unlatch the installed sensor, but once that's done, the replace part fits perfectly. Insert two screws and you're done.
★★★★★
★★★★★
Kevin D - April 24, 2018
Verified Purchase
Easy repair
Received part quick and oven is back to baking!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
sensor should pull into oven enough to easily unsnap and snap but didn't pull out
on the back side of the wall oven the sensor wire was ziptied tight. we had to totally pull oven out of its wall space, remove back panel, unhook zip tie, feed through sensor hole around insulation, connect and then replace back and return and relevel the oven. I have
Mary from EDGAR, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top oven overheating
Have a double wall oven and the top oven would not shut off or broiler part would stay on and burn tops of food. Since bottom oven was not having any issues felt like it could Not be control panel so decided to try the temp sensor. Since replacing oven has worked properly.
Ronald from NEVADA, MO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both oven bake and broil elements lost power suddenly at the same time.
Installation of the temparature sensor, one of the technician recommended parts took no time, just two screws and a snap off/snap on part. It did not fix the problem. I then replaced the main control panel, which requires more work, but didn't solce the ussue either. I then replaced the thermal fuse, which wasn't mentioned by tech support
... Read more, and required much more disassebly of the top panels of the stove, with still no fix to the problem. I am waiting to replace the thermostat heat sensor unit, the only other part in the circuit controlling power supply, requiring removal of the stove top again,
Read less
Alexander from DELMAR, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
7 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
January 17, 2024
I bought a new temperature probe for the top oven, part #5304525427 and still didn’t fix error code F30. Check ohms on new probe at 500ohm where existing probe in bottom oven reads 1000ohm. Bottom oven works fine. Took probe out of bottom oven and installed in top oven and error code F30 cleared and top oven works fine. Tried new probe in bottom oven and got error code F31. Why do these new probes #5304525427 not work? Found original probe part #318562500 is no longer available. What’s a person to do?
For model number FGEF306TPFA
Hello Joe, thank you for your inquiry. Based on the description that you have provided, we would recommend replacing the relay control board, part number PS10064722, to fix the issue. It receives signals from the main oven control board. The relay control board operates relays to regulate the oven elements. We hope this helps!
