Burner Cartridge Terminal Block

Hello Eugene, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: the surface element control switch-part# W11120791, burner cartridge terminal block-part# WPY708730, or check for a loose or burnt wire connection. Hope this helps!

Hello Ronald, thank you for writing. For this symptom you will want to replace either the Burner Cartridge Terminal Block part PS11757594, the Terminal Block part PS11750972, or the Infinite Switch part PS11744449. We hope this helps.

Hello Linda, Thank you for contacting us. thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.

Hi Linda, Thank you for your question. Please accept our apologies that you did not receive the correct information regarding your model. There is no electronic control board listed under your model number. the issue is likely the terminal block and it will need to be replaced. I hope this helps. Thank you and have a great day!

Hello Mary, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8768540. Hope this helps!

Hi Andy, Thank you for your question. The parts may still be available but we would need the model number of your stove not the cartridge that holds the burners. It could be either the switch or the burner that can cause that issue. I would suggest testing both with a multi meter. Good luck with your repair.

Hi Ronald, Thank you for your question. Here is a link to one of our YouTube videos that you may reference on how to install the terminal block. We did not have an installation video specifically for this terminal block, but this videos will give you a general idea on how to install the part. We hope this helps! Good luck with the repair!

Hello Everil, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!

Hello Pam, thank you for writing. This is likely due to a faulty Infinite Switch, part number PS11744449 for your model range. Good luck with your repair!

Hello Leah, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS12347301. Thank you for your inquiry, good luck with this repair!