Glass Grease Collecting Jar

Put pieces in place! Thank you PartSelect, you are a lifesaver!

Turned off the gas valve and disconected the gas line from the stove-top. Removed the stove top and disassembled the unit, to access the bad parts. While unit was disassembled we cleaned the parts which were to be reused and applied the new parts. The unit was then reassembled and reinstalled. The replacement of the gas valve required only a 1/2" wrench and screw driver, while the replacement of the ignitors required the use of an adjustable wrench. The ignitors are connected via spade connectors to an electrical device located in the electrical box at the lower center portion of the unit. Not a hard job but slightly time consuming.

My poor Jenn-air was about to kick the bucket, when I came across parts select. For under $ 500.00 I was able to get all new burners, knobs and grease jars. This and a few hours of scrubbing I am back to brand new stove. I had a repair man cme out and blessed my stove dead, microwave unsafe and about $1500.00 to repair the Jenn-air. Let just say for the money saved from Parts select, I got a real nice stove and microwave installed for the same amount quoted for the repair of the Jenn-air. Thanks Parts select for the great site and completive pricing.

I pulled out the old cartridge cleaned the stoptop up. Plugged in the the new cartridge ..there was a little steam left over fromt he cleaning when I turned up the heat but it went away. Looks great and save me $3k the difference in the price of a new stove top.