Maytag/Maytag_Thumb/33097.gif
See part 15 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Oven Door Seal

★★★★★
★★★★★
4 Reviews
$ 89.94   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11757564
Manufacturer Part Number WPY702338
Manufactured by Whirlpool
Product Description

Oven Door Seal Specifications

This oven door seal prevents heat from escaping the oven cavity when in use.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Oven not heating evenly | Little to no heat when baking
This part works with the following products:
Range, Wall Oven, Freezer, Microwave Oven Combo.
This part works with the following products:
Jenn-Air, Kenmore, Maytag, Whirlpool.
Part# WPY702338 replaces these:
AP6024214, 570025, 702338, 703611, Y702338, Y703611
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    George
    September 22, 2017
    How do i install oven door seal part number eap11757564
    Hi George, Thank you for your inquiry. I have found a customer comment on how they installed the part, "The oven seal replacement was very straight forward. Two screws held the door to the arms coming from the oven. I slid the door up off the arm and moved it to a workbench. This whole process should take about 15 minutes, a little longer if your unit is older and you want to clean as you go. Mine was fairly dirty and I gave it a cleaning as I removed parts. Unscrew all screws on the outer frame of the door, including two small ones on the side. Remove the outer frame and then the glass front and set them aside. A few more screws to remove the glass from the inner door, and even more on the remaining part of the door. You should also remove the screws holding the tiny brackets as well to release the portion that holds the oven seal in place. This is very straightforward, just keep pulling screws out until you can remove the old seal. Once the old seal is out, insert the new one using the wire embedded in the seal as your guide...the gap in the seal goes to the bottom. Put everything back together and re-install the door. My door hinges were spring loaded and took a little effort to move them down so the door can be slipped on. This is a two person job since the hinges do not lock in place, they spring right back up flush with the oven and you cannot install the door. Re-install the two set screws holding the door to the hinges and you are done! With the new seal in place, it felt a little puffy and the door did not seem to close as flush as it used to. This makes sense since the seal is new. I kept the door locked (like you would to use the oven cleaning cycle). I even kept it partially locked during cooking. Frankly, the hardest part was the cleanup of nasty grease and dirt that built up over the past decade or so. Best of luck!" I hope this helps. Thank you and have a great day!

    13 people found this helpful.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.2 / 5.0, 11 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      The oven door seal was ripped and was leaking.
      The oven seal replacement was very straight forward. Two screws held the door to the arms coming from the oven. I slid the door up off the arm and moved it to a workbench. This whole process should take about 15 minutes, a little longer if your unit is older and you want to clean as you go. Mine was fairly dirty and I gave it a cleaning as I removed parts. Unscrew all screws on the outer frame of the door, including two small ones on the side. Remove the outer frame and then the glass front and set them aside. A few more screws to remove the glass from the inner door, and even more on the remaining part of the door. You should also remove the screws holding the tiny brackets as well to release the portion that holds the oven seal in place. This is very straightforward, just keep pulling screws out until you can remove the old seal.

      Once the old seal is out, insert the new one using the wire embedded in the seal as your guide...the gap in the seal goes to the bottom. Put everything back together and re-install the door. My door hinges were spring loaded and took a little effort to move them down so the door can be slipped on. This is a two person job since the hinges do not lock in place, they spring right back up flush with the oven and you cannot install the door. Re-install the two set screws holding the door to the hinges and you are done!

      With the new seal in place, it felt a little puffy and the door did not seem to close as flush as it used to. This makes sense since the seal is new. I kept the door locked (like you would to use the oven cleaning cycle). I even kept it partially locked during cooking.

      Frankly, the hardest part was the cleanup of nasty grease and dirt that built up over the past decade or so.

      Best of luck!
      • Paul from Mickleton, NJ
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPY702338
      79 of 84 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven door seal needed replacement, filters replaced
      First we removed the door from the stove. Removed all the screws and removed the damaged seal. We replaced the seal and re-assembled the door.
      • Michele from Stafford, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      16 of 48 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      replce oven seal
      take door off. remove screws holding door together, take door apart. remove worn seal. install new seal. reposition insulation and door window at the appropriate location. begin re-assembling door in reverse order making sure that apprpriate pressure is applied to keep the seal in place. re-attach door to hinges. project worked out well. new seal looks great. would have been a costly repair if I called a professional. I'm handy, but things like this are often hard the first time. you have to take your time and be cognizant of putting it back together the way you took it apart.
      • Eli from Richboro, PA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Screw drivers
      • Parts Used:
        WPY702338
      11 of 14 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The outer glass panel of the interior glass assembly shattered when the oven was preheated to 400 deg.
      We made the mistake of taking the door apart before we received the replacement parts. After waiting several days, which was fine, the parts arrived. Then we had to figure out how it went back together. My wife and I did it and enjoyed working on it. However....after getting it partly reassembled, we (I) found four extra screws. We took it apart again and then put it back together. Turning the door over we found that the glass assembly had slipped. This meant that we had to take it apart again. This went on two more times LOL. Then the gasket gave us a couple of small fits as well. All in all it was a neat experience. I do suggest, unless you are experienced in appliance repair, to NOT disassemble the door until the parts arrive.

      The comments from others on the website were a great help.

      Thank you.
      • Paul from Hilton Head Island, SC
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Screw drivers, Socket set
      • Parts Used:
        WP5700M600-60, WPY702338
      8 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven door gasket frayed and worn allowing leakage.
      Followed the instructions given by Paul from Mickleton, NJ. Very simple, no problem. Using two small blocks of wood to hold spring loaded hinges out while I replaced the door on the hinges was a big help. Thanks for the excellent delivery time. Great service.
      • George from Mobile, AL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPY702338
      8 of 12 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The oven door seal was frayed, due to using oven cleaner.
      First I removed 7 screws, using a Philips head screwdriver, to allow access to the inside of the oven door. I then removed several more screws to separate the panel holding the seal so that I could remove it and replace it with the new seal. Once the seal was in place I re-inserted all the screws to the panel and door to complete the repair. The knobs just slipped on to replace the ones that broke and fell off.
      • Robert from Decatur, GA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPY702338, WP7711P492-60
      8 of 24 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven not heating properly
      The oven that was in out newly purchased house was a JennAir and over 20yrs old. Worked ok, but as with any heating element, the performance wanes over time. I decided to replace the baking and broiling element...and the oven door seal while I was at it. Everything went well, it was a simply remove/replace. Then I bumped the oven door where it was leaning up against the fridge waiting to be reinstalled. Down it fell on the tile floor. SMASH! Tempered glass EVERYWHERE. Got online with PartSelect and ordered a replacement (very reasonable price). It arrived in 2 days...just like the elements. Replacement was easy. Thanks to PartSelect for having the parts in stock and delivering them in record time!
      • Peter from Fitzwilliam, NH
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Pliers, Screw drivers
      5 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Seal was badly damaged on door of 24 year old range.
      Removed two screws near the hinges and removed door and laid it on counter.
      As we removed screws from each part of the door, we stacked the parts in the order removed. Tossed screws into a shallow pan for safekeeping.
      Removed old seal and put new one in its place.
      Reassembled parts in reverse order as I cleaned each one.
      Put door back on the hinges and the job was done.
      Would have been a much quicker job, but door had 24 years of dribbles down in it, and needed a good cleaning.

      We ordered a new element also, as the old one had blown up. Very gratifying to know there were still parts for my favorite old range.
      • Gwen from Memphis, TX
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPY702338
      2 of 2 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Replace worn oven door seal
      Removing the oven door and several layers of metal to get to the seal, is a fairly easy process. Our door had three different fasteners, torx head screws to remove the door, a very small flat head screwdriver to remove the chrome door trim screws, and a nut driver to remove the inner panels and glass. The replacement seal is over-large and must be trimmed. Care should be taken when fitting the integrated wire. Bending at the corners only, makes assembly much easier. Reassembly is the reverse of diassembly. Care must be taken that the seal wire hasn't popped out of it's seat when the cover is installed. This is the most time-consuming and frustrating part of the repair. Patience is paramount to get a good fit. Because I had made an odd bend in it, about one inch of wire was not properly seated after the cover was seated and tightened down. I was able to gently squeeze it into the seat with a flat tip screwdriver without removing any screws. The final problem area is reinstalling the door. Although two people would be helpful to accomplish this Task, I was able to accomplish it with the aid of a three foot piece of 2x4. By wedging the piece of lumber behind both hinges, they were held open under tension to allow slipping the door on. Once partially installed, the 2x4 can be removed and the door seated. Hope this helps.
      • Al from Chassell, MI
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Screw drivers
      • Parts Used:
        WPY702338
      1 person found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      worn door seal on oven
      takes two people to put the oven door back in place but otherwise very simple as long as you keep all your screws and pads in place
      • Sarah from Albany, GA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPY702338
      1 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      4 Reviews
      4.5
      Filter By Rating:
      • 5 Stars
        2
      • 4 Stars
        2
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11757564
          Manufacturer Part Number: WPY702338
          Brand
          Model Number
          Description
          Kenmore
          1988131235
          Freezer
          Kenmore
          1988131285
          Freezer
          Kenmore
          1988131512
          Freezer
          Kenmore
          1988131532
          Freezer
          Kenmore
          1988131537
          Freezer
          Kenmore
          1988131582
          Freezer
          Kenmore
          1988131842
          Freezer
          Kenmore
          1988131872
          Freezer
          Kenmore
          1988132330
          Freezer
          Kenmore
          1988132337
          Freezer
          Kenmore
          1988132350
          Freezer
          Kenmore
          1988132370
          Freezer
          Kenmore
          1988132730
          Freezer
          Kenmore
          1988141552
          Freezer
          Kenmore
          1988141582
          Freezer
          Kenmore
          20133
          Range - Kenmore Range/Stove/Oven Model 20133(1988) Parts
          Jenn-Air
          20135
          Range
          Kenmore
          20234
          Range - Kenmore Range/Stove/Oven Model 20234(1988) Parts
          Jenn-Air
          20236
          Range
          Jenn-Air
          20237
          Range
          Jenn-Air
          20239
          Range
          Jenn-Air
          21239
          Wall Oven - Built-in, Electric
          Kenmore
          21243
          Range - Kenmore Range/Stove/Oven Model 21243(1988) Parts
          Kenmore
          62920236
          Range - Kenmore Range/Stove/Oven Model 629.20236 (62920236, 629 20236) Parts
          Kenmore
          62920237
          Range - Kenmore Range/Stove/Oven Model 629.20237 (62920237, 629 20237) Parts
          Kenmore
          62920245
          Range
          Kenmore
          62921239
          Wall Oven
          Kenmore
          62946965
          Range
          Kenmore
          62946969
          Range
          Maytag
          CCE6200ACB
          Microwave Oven Combo - Electric

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service