Delta Frame Surface Unit - 8 Inch WPY04100166 | Official Whirlpool Part | Fast Shipping | PartSelect
Delta Frame Surface Unit - 8 Inch – Part Number: WPY04100166
( Grid squares measure 1x1 inch )
Delta Frame Surface Unit - 8 Inch – Part Number: WPY04100166 Delta Frame Surface Unit - 8 Inch – Part Number: WPY04100166 Delta Frame Surface Unit - 8 Inch – Part Number: WPY04100166 Delta Frame Surface Unit - 8 Inch – Part Number: WPY04100166 https://partselectcom.azureedge.net/Schematics/Maytag/33694.gif

Delta Frame Surface Unit - 8 Inch

PartSelect Number PS11757481

Manufacturer Part Number WPY04100166

Manufactured by Whirlpool

Product Description

Delta Frame Surface Unit - 8 Inch Specifications

This 8 inch surface burner with reinforced delta frame carries 2100 watts and 240 volts. It has five turns and is compatible with many electric ranges. Its center medallion is all black in color.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Element will not heat

This part works with the following products:

Range, Cooktop, Microwave Oven Combo.

This part works with the following brands:

Maytag, Jenn-Air, Hardwick, Whirlpool.

Part # WPY04100166 replaces these:

14211071, 4381750, 550072, 707457, 715928, 74005447, 7406P050-60, AP6024131, MP21MA, MP26MA, TS5D8221, TS5D8221LM, TS5D8221PB, TS5D8221WI, WPY04100166VP, Y04100166, Y0E00801799.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 19 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Donna from Charlotte, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPY04100166, WPY04100165, WP707929, 12200035
Cooktop was looking old and worn though there was no working problem.
All of the "old" pieces were very easily removed and replaced with the new pieces. The update looks terrific and works just fine!
150 of 297 people found this instruction helpful.
Was this instruction helpful to you?
george from burke, AL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPY707454, WPY707453, WPY04100166, WPY04100165, 715878, 715877
Wanted to update surface parts to a very old (27 yrs?) Jenn-air range on an island
The first task was to find the rings, drip bowls and elements on the "PartSelect" webpage. It was surprising easy, especially since I have no experience whatsoever in replacing range parts. The ordering was straight-forward, and most of the parts arrived within a week, a couple were back-ordered, but arrived a week later. Instillation was easy - just unplug elements, lift parts out, and insert new parts. I made a mistake in ordering - for the left side of the range, no adaptor rings are needed. I returned these excess parts to PartSelect, and within a week, they refunded the costs of these parts. Overall, I'm very please with the parts and service.
56 of 63 people found this instruction helpful.
Was this instruction helpful to you?
Lucille from Mattoon, IL
Difficulty Level:
Difficult
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
WPY700854, WPY04100166, WPY04100165, 715878, 715877, 12001676
Wanted to "renew" cook top
The drip pans, burner knobs and electric surface elements are easily removed and replaced. The new receptacles for the burners were NOT easy to replace, but electricians were on hand to install when they replaced the cook top into the new counter top. Even the electricians had to read the instructions - and remove the control panel to replace one of the receptables. Looks like a new cook top.
29 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Walter from N. Richland Hills, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
WPY04100166, 700855K, 12200054, 12001676
Both the 8'' burner and the vent fan didn't work.
1st-turned off breaker, 2nd- took out the two screws that hold the control panel and lifted it up so I could remove the surface unit switch,3rd- removed wires from old switch and securing nut and removed old switch,4th- installed new switch and plugged in wires, then turned on breaker to see if burner would work and it did. 5th-turned off breaker again and removed the wires from the fan switch and used nut driver to remove retainer nuts,6th-installed new fan switch and plugged in wires, 7th- put control console back in place and the two screws that hold it in place. Turned breaker back on and everything worked.Didn't use the burner receptacle or burner.
8 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Albert from Snellville, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Parts Used:
WPY04100166, 715878, WP707929, 12001676
Connector for burner broke old and well used
Had to drill out screw for old connector bracket and also had to extend wires from controls this took most time. Once done with this used wire cutters to strip back insulation and then put the whole mess back together also used a larger wire nut to reconnect wires.
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Daniel from Magalia, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
12001676, WPY04100166
Burner would not get hot.....only warm. Connector was worn as well.
First, I removed the two screws holding the element in place. I removed the element from the connector. I then removed the trim ring and drip pan. I unscrewed the retaining screw holding the connector and pulled out the connector about three inches and disconnected the two wires leading to from the old connector. I removed the old connector. I then connected the two wires leading from the new connector and fasten the connector to its retainer with a screw . I reinserted the drip pan and trim ring and plugged the new element into the connector. I turned on control knob to high and tested the element., which glowed red hot. Job completed and customer very well satisfied..
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Richard from Framingham, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPY04100166, WPY04100165, WP3191922
Replaced surface elements and knobs
Removed surface elements by pulling straight out of electrical fitting. Replaced with surface elements purchased online by pushing directly into electrical connector.
Back of burner knob larger than post on stove. These were returned to PartSelect for credit.
All items ordered arrived with a day of placing order - waiting on confirmation that the knobs have been received.
I will definitely use PartSelect in the future.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
John from Dublin, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
WPY04100166, 12001676
burner points and recepticle pitted
removed burner and recepticle and replaced new one. You don't have any place to comment on service, so I'll put it here. I talked to Herb and ordered parts with him on a Monday afternoon. He was very helpful. The part came Thursday about noon and I immediatly installed parts and my wife cooked supper (thats southern for the evening meal) that night. A really wonderful experience. Thank's Herb.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Alfred from Fayetteville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPY04100166, WPY04100165, 715878, 715877
Old stove drip bowls needed replacing
Removed heating elements and dropped new drip bowls in and replaced new elements
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Kenneth from Crosby, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
W11120795, WPY04100166, 12001676
Burner was not heating
Took an volt/ohm meter tested the connections, burner resistance and wiring AFTER turning off the power. Note: I used the volt/ohm meter to check to be sure power was off. Just in case the circuit breaker box wasn't labeled correctly. After determining the switch was open and was not making connection I ordered a new one from Parts Select. I also ordered a new burner and wiring with socket since the old one appeared well used with age. By replacing the burner, wiring and switch it put the stove top in a like new condition. Parts Select was fast and had great prices. It was very easy and the connections to the switch were plug type making the repairs very easy.
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
2 Reviews
4.5
out of 5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11757481
Manufacturer Part Number: WPY04100166
Brand
Model Number
Description
Jenn-Air
CCE1400W
Cooktop - Electric
Jenn-Air
CCE1400W-C
Cooktop - Electric
Jenn-Air
CCE407W
Cooktop - Electric
Jenn-Air
CCE407W-C
Cooktop - Electric
Maytag
CDE820
Range - Electric
Maytag
CDE850
Range - Electric
Maytag
CDE851
Range - Electric
Maytag
CDE852
Range - Downdraft, Electric
Maytag
CLE700
Microwave Oven Combo - Electric
Maytag
CNE200
Range - Freestanding, Electric
Maytag
CRE200
Range - Electric
Maytag
CRE200B
Range - Electric
Maytag
CRE300
Range - Electric
Maytag
CRE300B
Range - Electric
Maytag
CRE350
Range - Electric
Maytag
CRE350B
Range - Electric
Maytag
CRE400
Range - Electric
Maytag
CRE400B
Range - Electric
Maytag
CRE500
Range - Electric
Maytag
CRE500B
Range - Electric
Maytag
CRE600
Range - Electric
Maytag
CRE600B
Range - Electric
Maytag
CRE650
Range - Electric
Maytag
CRE682
Range - Electric
Maytag
CRE682B
Range - Electric
Maytag
CRE700
Range - Electric
Maytag
CRE750
Range - Electric
Maytag
CRE750B
Range - Electric
Maytag
CSE600
Cooktop - Electric
Maytag
CSE601
Cooktop - Electric