Maytag/Maytag_Thumb/33792.gif
See part 10 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Bake Element

★★★★★
★★★★★
7 Reviews

Rated by 17 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 62921336!
 Fits your 62921336!
PartSelect Number PS11757476
Manufacturer Part Number WPY04100020
Manufactured by Whirlpool
Product Description

Bake Element Specifications

This bake element is 17 inches wide. It has a terminal depth of three inches, and a total element length of ninteen inches. This element is intended for use with some electric ovens.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly
This part works with the following products:
Wall Oven, Microwave Oven Combo, Range.
This part works with the following products:
Jenn-Air, Maytag, Kenmore.
Part# WPY04100020 replaces these:
AP6024126, 04100020, 04100389, 570159, 701724, Y04100020, Y04100389, Y701724
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wanda
December 9, 2019
What part do i need for my oven when the heating element does not keep coming on? It heats, then does not start again.
For model number W188
Hello Wanda and thanks for writing. It certainly sounds like a faulty PS11757476 test and replace if needed. We hope this helps. Please contact us anytime.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Barbara
November 2, 2022
I have a jenn-air wall oven with microwave and the baking element in the oven is not working. I am trying to find the correct replacement part and wondering if I can replace it myself!
For model number W225
Hello Barbara, thank you for reaching out. The bake element compatible with your model is part number PS11757476. We have attached a video link to assist you with the replacement of the baking element. If you require assistance to place an order, please contact customer service. We hope that helps!
play video

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 17 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Old bake element burned out
1. Removed screws and detached push on cannectors
2. Removed old element
3. Pushed eclectrial connectors onto new element and attached new element to oven with screws.
  • Cecil C. from St. Johns, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
19 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat
Easy as pie to do this repair. You first remove the 2 screws holding the element in. Then you carefully pull out the element and remove the wire clips at the ends. Just reverse the process with the new part.

By the way, I ordered my part from parts select on a Friday afternoon and it was on my doorstep Saturday morning..... and this was with regular delivery!
I would buy again in a heartbeat from parts select.
Joe Golub
  • Joseph from Lyme, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bake element not working
I removed the bad element - two screws, and tested it on my meter as recommended. The test meter showed it was bad, so I ordered a replacement element from PartSelect. I did check getting a part from a local dealer, and it would have been $10 more. The help and recommendations I recieved on the PartSelect repair forum make it easy.

Terry Hausler
  • Terry from Williamsville, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake Element Stopped Heating.
I removed one screw easily. The other screw was difficult to remove without stripping it. I sprayed wd 40 and let it sit overnight. The next day, my husband sprayed it again and after trying several different size phillips screwdrivers, he got the second screw out. He easily removed the element and then the two wires from it. He attached the two wires and replaced the screws. We tested it and it worked. The best part is: my husband scrubbed the oven before putting all the parts back!
  • Paula from Green Village, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat
I opened the oven door and unscrewed the two screws that connected the element to the back of the oven. I then pulled the element forward but it would not expose the electrical connections that powered it. I pulled a little harder and it would not pull through the insulation. I then decided that it must be accessable from the back. I took off the door the lighten the oven. I pulled the oven out of the cabinet till the conduit was taught and I could just barely see that there wasn't a panel to access the connection. I then put the back into the cabinet and pulled a little harder yet on the element and the connecters pull through the insulation. I was then able to test the element with the multimeter and decide the power was getting to the element but no heat. I ordered the part the next day. Recieved it the day after that, smokin' fast service I must add. Installed the element and it works like a new one. My wife loved it and then she loved me.
  • Ken from Greenfield, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The lower heating element stopped working.
The heating element is held in place by two phillips screws which were rusted fairly tight, visible at the back of the oven. I tapped my screwdriver with a hammer as I loosened them. (I would have used liquid wrench if the hammer did not work) Two wires are fastened to the element by two clips that you can slide off by hand. Slip the wires off the old element and onto the new element and install the two screws and you are done.
  • brian from morga hill, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bake element burned out
My wife removed old element and replaced new element by removing and rescrewing 2 screws and detaching and retaching 2 wires to thr respective elements in about 5-10 minutes.
  • Bob from Jackson, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element burned out/arced
Removed old element, 2 screws, cleaned oven , 60 minutes, replaced with new element, working like new, wife thoroughly impressed...
  • William from GAINESVILLE, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced the heating element
It would have been a very easy job if the one wire had not fallen inot the back. I could not reach it and fried to figure out how to get in the back to no avail. Finally I took a piece of wire coat hangerm and bent it and then fished it out. The packing around the hole compressed while I was trying to get the wire and I thought I wpuld have to replace it, but overnight it resumed its original size. It should have probably taken less than thirty minutes.
  • Paul from Newark, DE
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would not heat
Checked the element to see if it was open or no
resistance, it was open
e.g. First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...)
  • Dane from Evansville, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
5.0
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757476
Manufacturer Part Number: WPY04100020
Brand
Model Number
Description
Kenmore
21237
Range - Kenmore Range/Stove/Oven Model 21237(1988) Parts
Jenn-Air
21238
Wall Oven - Built-in, Electric
Jenn-Air
21239
Wall Oven - Built-in, Electric
Kenmore
21241
Range - Kenmore Range/Stove/Oven Model 21241(1988) Parts
Kenmore
21243
Range - Kenmore Range/Stove/Oven Model 21243(1988) Parts
Kenmore
21244
Range - Kenmore Range/Stove/Oven Model 21244(1988) Parts
Kenmore
21245
Range - Kenmore Range/Stove/Oven Model 21245(1988) Parts
Kenmore
21246
Range - Kenmore Range/Stove/Oven Model 21246(1988) Parts
Kenmore
21334
Microwave Oven Combo - Kenmore Oven/Microwave Combo Model 213.34 (21334, 213 34) Parts
Kenmore
21335
Microwave Oven Combo - Kenmore Oven/Microwave Combo Model 21335(1988) Parts
Jenn-Air
21336
Microwave Oven Combo
Kenmore
62921238
Wall Oven
Kenmore
62921239
Wall Oven
Kenmore
62921336
Wall Oven
Maytag
CCE700
Wall Oven - Electric
Maytag
CCE701
Microwave Oven Combo - Electric
Maytag
CWE1000
Wall Oven - Built-in, Electric
Maytag
CWE600
Wall Oven - Electric
Maytag
CWE601
Wall Oven - Built-in, Electric
Maytag
CWE700
Wall Oven - Electric
Maytag
CWE7000ACB
Wall Oven - Electric
Maytag
CWE7000ACE
Wall Oven - Electric
Maytag
CWE701
Wall Oven - Built-in, Electric
Maytag
CWE9900
Wall Oven - Electric
Maytag
GCCE701
Microwave Oven Combo - Electric
Maytag
LCCE700
Wall Oven - Electric
Maytag
LCCE701
Microwave Oven Combo - Electric
Jenn-Air
W105
Wall Oven - Built-in, Electric, Wall
Jenn-Air
W105-C
Wall Oven - Electric
Jenn-Air
W121
Wall Oven - Built-in, Electric

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service