Maytag/Maytag_Thumb/33171.gif
See part 2 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Bake Element (16 Inch long x 19 Inch wide)

★★★★★
★★★★★
9 Reviews
$68.26   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11757475
Manufacturer Part Number WPY04100019
Manufactured by Whirlpool
Product Description

Bake Element (16 Inch long x 19 Inch wide) Specifications

This electric oven bake element with screw in wire terminals is 19 inches wide. It has a terminal depth of three inches and a total element length of nineteen inches. This element is intended for use with some electric ovens.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Jenn-Air, Kenmore, Maytag, Hoover.
Part# WPY04100019 replaces these:
AP6024125, 04100019, 570066, 702550, Y04100019, Y702550
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Pat
    December 17, 2019
    Part no. Wpy04100019 -- what is the wattage on this bake element?
    For model number CDE850
    Hello Pat and thanks for writing. 1950/2600 Watt 208/240 Volt. We hope this helps. Please contact us anytime.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 4.2 / 5.0, 41 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Old element was worn out (burst in line)
      First, I cut the power to the stove to be sure no electrical current could be conducted. Next, I removed the two screws that hold the heating element to the back of the stove. Then, I removed the oven racks and slowly slid the heating element out until I could see the wires that attached to it. Because the element has the female end of the wire, I pulled the male ends out of both the left and right side of the element.. This releases the old element and I discarded it. Next, I took the new element, slide the male ends into the new female ends that protruded from both the right and left side of the element. I crimped these slightly with my pliers to make sure that they would stay secure when I pushed the element into place. With the new element securely attached, I slowly slid the element into place, this forces the exposed wires to be retracted out of sight and in the insulated part of the oven. I then took the two screws that I had to removed in the beginning, and used them to fasten this new heating element to the back of the oven. Finally, I turned the power back on and the element worked fine.
      Other Parts Used:
      Stove Cartridge Assembly
      • John from Corfu, NY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers
      57 of 62 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      lower heating element and lite burned out.
      This is what people need to know. Unit burned out 7:00pm Thursday, ordered the parts 11:00am Friday, FedEx delivered it to me Saturday at 1:00pm. How can anybody ask for more. Good price and easy to install. Julia W
      Other Parts Used:
      Light Bulb - 40W
      • william from gaithersburg, MD
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      23 of 612 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Seal rap around oven door window was separating from its frame.
      The frame and window were supplied as a completed assembly. About 4 other panels had to be removed prior to installing the new window assembly. This was easy to do with a screwdriver removing about 16 screws and then replacing all panels back in place after replacing the new window assembly. No instructions were supplied with the part, but anyone with a little mechanical abillity could do it. You may need a helper to hold panels in place while they were being screwed back in place. Total job took about one hour
      Other Parts Used:
      Interior Window Assembly
      • Lester from Torrance, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Screw drivers
      16 of 19 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      My oven would broil but not bake.
      First, I made sure the circuit breaker was off to the oven. Next, I removed the two screws that hold the element in place , pulled the element out a few inches and eased the wires apart at the metal connectors. I eased in the new wires, put the two screws back in, and voila. In under five minutes, the oven was fixed.
      • M Lynette from Pawling, NY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      9 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven baking element totally burned out and started on fire
      Being a single Mom for almost 16 years I have learned to do everything. When the Jenn-Air oven baking element started on fire I freaked out. It turns out that PartSelect.com has the part as usual. I have ordered before for the same appliance and even though it is 15 years old you always have what I need. I removed the old one (two screws in back of oven), measured, logged on, ordered, and the next day installed the new baking element. Even I was able to do this and it fit and worked the first time!!!!
      • Maria from Orchard Park, NY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      6 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bake Element Broke in Two
      My spouse calls me Mr. Breakit--and she's right. I was delighted to read others' accounts that this was easy, but I wasn't sure. When the part arrived, we had 1 hour before company arrived. I took two screws out of the plate (tight--I had to apply a lot of torque), slid the old piece out, attached the new piece, put the screws back in. Voila! (Oh, yeh, do remember to turn the juice off.) We were "cooking" in about ten minutes. So easy a caveman could do it. And I did.
      • Fred from New Windsor, NY
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      5 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven not heating properly
      The oven that was in out newly purchased house was a JennAir and over 20yrs old. Worked ok, but as with any heating element, the performance wanes over time. I decided to replace the baking and broiling element...and the oven door seal while I was at it. Everything went well, it was a simply remove/replace. Then I bumped the oven door where it was leaning up against the fridge waiting to be reinstalled. Down it fell on the tile floor. SMASH! Tempered glass EVERYWHERE. Got online with PartSelect and ordered a replacement (very reasonable price). It arrived in 2 days...just like the elements. Replacement was easy. Thanks to PartSelect for having the parts in stock and delivering them in record time!
      Other Parts Used:
      Oven Door Seal Broil Element
      • Peter from Fitzwilliam, NH
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Pliers, Screw drivers
      5 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The oven wouldn't heat because the bake element had burned a hole through the wall of the element tube.
      "First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and removed the two wires." from the burned out element. I plugged in the new element, reinstalled the new element and, 10 minutes start to finish, the oven heats again.
      So easy even I can do it. !!!
      • Richard from Columbus, NC
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      4 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven electrical element was broken (literally)
      First we removed the two screws that hold the element in place. After pulling it from the back of the oven we did not realize that the clips that held the wires could be slipped off the 'tongues' of the element. Therefor we thought we had to cut the wires - which we did. After realizing that the clips came off, we went to the store and bought a box of new clips, stripped a small portion of the plastic on the wire to expose the wire and put it in the new clips and crimped them. Then slipped the new clips onto the new element, replaced it and put the old screws back. You wouldn't need to buy new clips (not expensive) if you know ahead that they can be removed from the old element and slipped onto the new one. We were amazed at how quickly the element arrived in the mail. Have bookmarked this sight for future repairs.
      • Madeleine from Gilford, NH
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven would not heat
      First I removed the two screws that held the old element in place. Then I pulled the element out about 5 inches so I could reach and pull off the wire clips from the old element. I then attached the wire clips onto the new element and pushed back the wires into the insulated area and when the back plate matched up to the screw holes, I re-inserted the screws and tighten them down. The oven works great.
      • Rose from Modesto, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers, Socket set
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      9 Reviews
      4.8
      Filter By Rating:
      • 5 Stars
        8
      • 4 Stars
        0
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11757475
          Manufacturer Part Number: WPY04100019
          Brand
          Model Number
          Description
          Kenmore
          20133
          Range - Kenmore Range/Stove/Oven Model 20133(1988) Parts
          Jenn-Air
          20135
          Range
          Kenmore
          20214
          Range - Electric Range
          Kenmore
          20215
          Range - Electric Range
          Kenmore
          20234
          Range - Kenmore Range/Stove/Oven Model 20234(1988) Parts
          Jenn-Air
          20236
          Range
          Jenn-Air
          20237
          Range
          Kenmore
          62920236
          Range - Kenmore Range/Stove/Oven Model 629.20236 (62920236, 629 20236) Parts
          Kenmore
          62920237
          Range - Kenmore Range/Stove/Oven Model 629.20237 (62920237, 629 20237) Parts
          Maytag
          CDE820
          Range - Electric
          Maytag
          CDE850
          Range - Electric
          Maytag
          CDE851
          Range - Electric
          Jenn-Air
          D140
          Range
          Jenn-Air
          D140-C
          Range
          Jenn-Air
          D146
          Wall Oven
          Jenn-Air
          D146-C
          Wall Oven
          Jenn-Air
          D146W
          Wall Oven - Freestanding, Electric
          Jenn-Air
          D156
          Wall Oven
          Jenn-Air
          D156B
          Range - Freestanding, Electric
          Jenn-Air
          D156W
          Range - Freestanding, Electric
          Hoover
          S100
          Range
          Jenn-Air
          S101
          Range
          Jenn-Air
          S105
          Range
          Jenn-Air
          S105-C
          Range
          Jenn-Air
          S120
          Range - Downdraft, Electric
          Jenn-Air
          S120-C
          Range - Freestanding, Electric
          Jenn-Air
          S125
          Range - Downdraft, Electric
          Jenn-Air
          S125-C
          Range - Downdraft, Electric
          Jenn-Air
          S160
          Range - Slide-in, Electric
          Jenn-Air
          S160-C
          Range - Slide-in, Electric

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service