Range Bake Element

Hi Steve, Thank you for the question. This element is 16"X16" including the prongs that plug in. This element is the correct part for the model number provided and shoudl be the same as what you have there now. Hope this helps!

Hello Justin, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757472 for the Lower Oven Element and the Upper Oven Bottom Element. Hope this helps!

Hello Joanna, thank you for your question. The bake element for your unit is PartSelect Number: PS11757472. Please enter the part number into the site for current price and availability. Good luck with your repair!

Hello Donna, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PS11744510. Good luck with your repair!

Hello Warren, Thank you for the question. If the new element did not fix the issue, and all wiring of good the oven control would be defective. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!

Hi Joe, Thank you for your inquiry. You may be able to purchase the heating element locally. You will need to check your yellow pages and go through them to see what businesses may carry it. I hope this helps. Thank you and have a great day!

Hi Tommie, Thank you for the question. You can email us a customerservice@partselect.com. We will not be able to guarantee we can locate the correct element without the model number but we will be happy to try. Please also provide as much information on the element as you can, such as measurements of the over all element and the distance between the prongs where it plugs into the appliance. Also if the prongs are screw on or push on.The more pictures the better. Hope this helps!

Hello Kathy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11757472.Thank you for your inquiry, good luck with this repair!

Hi Jim, Thank you for your question. Manufacturers often make changes to models, which can sometimes result in different parts being used for your model. For instance, a motor may be changed mid-year, which could mean that a different wiring harness has to be used. When a series number is shown on your appliance, you will need to identify what series your appliance belongs to. The series is the first few characters of your serial number. When a given part in a model's part list has a series number, it means that the part is the right one for all models whose serial number starts with that series number, or a higher series number. If there is an exception to this rule, another part will be listed for you. To put it another way, you should select the part with the highest series number which is less than your entire serial number. So in your case it would be series 18. The part number for the bake element would be PS11757472. I hope this helps. Thank you and have a great day!

Hello Madeline thank you for your question. Unfortunately, if the sensor and the element were replaced and you're still not able to get the temperature regulated the issue would be the electronic control board part number PS11756979. I hope this helps!