Range Bake Element WPY04000066 | Official Whirlpool Part | Fast Shipping | PartSelect
Range Bake Element – Part Number: WPY04000066
Range Bake Element – Part Number: WPY04000066 Range Bake Element – Part Number: WPY04000066 Range Bake Element – Part Number: WPY04000066 Range Bake Element – Part Number: WPY04000066 https://partselectcom.azureedge.net/Schematics/Maytag/45163.gif

Range Bake Element

Product Description

Range Bake Element Specifications

The bake element is the heating element that is found at the bottom of the oven and is responsible for 90 percent of the bake heating. This spade style bake element is 16 inches wide, and connects with push-on wire terminals. It has a terminal depth of three inches and a total element length of nineteen inches. You may need to replace the heating element if your oven produces little to no heat, the oven will not heat evenly, or the element will not heat at all. This element comes with an instructions sheet and is intended for use with electric ovens. To see if this part will fit your oven, please check the list of compatible brands below.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Little to no heat when baking | Element will not heat | Oven not heating evenly

This part works with the following products:

Wall Oven, Range, Microwave Oven Combo.

This part works with the following brands:

Magic Chef, Maytag, Hardwick, Admiral, Jenn-Air, Kenmore, Norge, Roper, Crosley, Whirlpool.

Part # WPY04000066 replaces these:

04000047, 04000066, 0E00105199, 1938318, 1938325, 1938370, 551119, 74004073, 7406P013-60, 7406P075-60, 7406P424-60, 790208, W10310269, Y04000047, Y04000066, Y0E00105199.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Steve
November 8, 2017
My oven bake element is 16"wide x 14 7/8"deep (not including the end that plugs in). The bake element on your site appears to be 16" x 16". It might be somewhat of a tight fit. Will it work with my Magic Chef model no. 9522wuv. Double checking before i make the order.
For model number 9522WUV
Hi Steve, Thank you for the question. This element is 16"X16" including the prongs that plug in. This element is the correct part for the model number provided and shoudl be the same as what you have there now. Hope this helps!

4 people found this helpful.

Was this helpful?
Joe Kavich
November 19, 2017
Can i pick up the replacement heating element from a store or dealer in the dallas area as opposed to having it shipped to me?
Hi Joe, Thank you for your inquiry. You may be able to purchase the heating element locally. You will need to check your yellow pages and go through them to see what businesses may carry it. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Joanna
January 4, 2019
Based on my serial number, i need a series 16 heating oven element but i don't see that listed in the options? Thanks
For model number Cwe4800ace
Hello Joanna, thank you for your question. The bake element for your unit is PartSelect Number: PS11757472. Please enter the part number into the site for current price and availability. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Donna
February 20, 2019
Can’t seem to find this model online. The element is 16”x16” but the two metal clips that fit into the back of the oven are l shaped and not flat. Is there a replacement part for this? Would the same sized element with flat clips work? Thanks!
For model number Magic Chef model #96DA 4CW
Hello Donna, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PS11744510. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Warren
April 2, 2019
Replaced element still no heat.
For model number 97F. 4EXWW
Hello Warren, Thank you for the question. If the new element did not fix the issue, and all wiring of good the oven control would be defective. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!

Was this helpful?
Justin
November 11, 2019
In addition to the lower element in the top oven will this also replace the single element in the lower oven?
For model number 9522XUB
Hello Justin, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757472 for the Lower Oven Element and the Upper Oven Bottom Element. Hope this helps!

Was this helpful?
Kathy
January 14, 2019
Maytag wall oven. Will this part replace the current baking element?
For model number CWE4800ACE
Hello Kathy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11757472.Thank you for your inquiry, good luck with this repair!

Was this helpful?
Jim
January 18, 2019
Serial # is 26476620jn how do i know what series i have in order to order the correct heating element, lower oven?
For model number Maytag CWE5800ACE
Hi Jim, Thank you for your question. Manufacturers often make changes to models, which can sometimes result in different parts being used for your model. For instance, a motor may be changed mid-year, which could mean that a different wiring harness has to be used. When a series number is shown on your appliance, you will need to identify what series your appliance belongs to. The series is the first few characters of your serial number. When a given part in a model's part list has a series number, it means that the part is the right one for all models whose serial number starts with that series number, or a higher series number. If there is an exception to this rule, another part will be listed for you. To put it another way, you should select the part with the highest series number which is less than your entire serial number. So in your case it would be series 18. The part number for the bake element would be PS11757472. I hope this helps. Thank you and have a great day!

Was this helpful?
Tommie
March 26, 2018
I have a 15 to 20 year old stove the model number is gone. I have a picture of the bottom heating element how do i send the pucture?
For model number Unknown stove is 20 years old
Hi Tommie, Thank you for the question. You can email us a customerservice@partselect.com. We will not be able to guarantee we can locate the correct element without the model number but we will be happy to try. Please also provide as much information on the element as you can, such as measurements of the over all element and the distance between the prongs where it plugs into the appliance. Also if the prongs are screw on or push on.The more pictures the better. Hope this helps!

Was this helpful?
Madeleine
November 7, 2018
I have a Maytag electric oven and stove. My oven element blow. I replaced it and my oven sencer went. I replaced that aswell. My oven still will not reach 400 hundred. Everey thing else works great . Boiler topof the stove clock etc. A local repairman said it could be the mother board. I would have thought nothing would work if that was the case.
For model number MER8674 AW
Hello Madeline thank you for your question. Unfortunately, if the sensor and the element were replaced and you're still not able to get the temperature regulated the issue would be the electronic control board part number PS11756979. I hope this helps!

Was this helpful?
Related Parts

Control, Electric

$361.96

$60.00
In Stock
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 37 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
DENISE from GERMANTOWN, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPY04000066
bottom heating element in oven disintegrated
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I threw away the old pieces.

Then I connected the two wires on the new element. I pushed the wires back in the insulation in the wall of the cabinet. Then I inserted the two screws and tightened them in.

SUPER EASY!!!!!

This $40 part saved me $1500 on a new double wall oven.
59 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Shirley from Dallas, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPY04000066
Oven heating element blew out
Removed 2 screws, pulled element out. My husband used an ohmmeter to see if the electricity needed to be turned off. It showed no voltage. He could not remove electrical connectors by hand, so he used insulated pliers. When he touched the connectors, a shower of sparks covered the inside of the oven and tripped the breaker switch. Then we noticed the pliers were welded to the side of the oven. Thankfully the pliers had insulated handles and he was not hurt. It might be a good idea to put in the instructions to TURN OFF POWER TO OVEN in the breaker panel because our oven was definitely HOT. Oven works perfectly now.
24 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Kevin from New London, OH
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPY04000066
Element was burned through
I used tiny amount of WD40 on old screws,let sit for 2 minutes. Tapped the screws(2) of them with a small hammer to wake them up, I had a cordless drill and they backed right out. Pulled the old element out, used needle nose pliers to pull connectors off of the element(wiggle gently) put the new element on, reinserted back in the oven,attached with new screws that came with the element, started the oven. Worked Perfect!!!
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
James from Kerrville, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPY04000066
Element was burned up
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. Clipped the wires back onto new element and used the two stainless screws provided in kit to resecure.

It should be noted that I first called a local Maytag Appliance Co. and inquired about this element. I was told that they would have to order it and it would cost me 68.00 plus tax. I told them I knew what these elements are worth and their price was a gouge. They didn't care. This is a repair that anyone knowing how to work a Phillips screwdriver can perform. Save some money and do-it-yourself.

Thanks Partselect!
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Keith from hixson, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPY04000066
Lower element in top double oven failed
turned off power, removed two screws mounting the old element, cut wires, and removed old element, crimped new stake connectors onto existing wiring, attached stake connectors to new element, installed element with two new screws provided, turned power back on.
It would be easier to just slip the two stake connectors off and reinstall on the new element but I elected to install new connectors because the oven was over ten years old and one seemed loose.
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
mike from canton, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPY04000066
element burned out
I removed the two screws holding the element in place and disconnected the two wire terminals.
I then reversed the above steps to insatll the new element. SUPER EASY!!
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Michael from Wilmington, DE
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPY04000066
The baking element flamed out and broke
Fortunately, we had read the instructions on line, because none were included with the part. Still, it was REALLY easy. We unscrewed the two screws, pulled the element away from the back wall and pulled the wires off the contacts at the back. (That was the hardest part, because they were stuck-on well. WD-40 was helpful here.) The one piece of paper that did arrive with the part told us the ground wire was no longer necessary if you use the new screws that came with the part, so we ended up cutting the ground wire off. We then put the other wires back on the new contacts, pushed it back into place, and re-screwed it to the back wall. We have used the oven several times since, and it's all working well.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Samuel from San Fransansico, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WPY04000066
The plate is diffrent shape and holes was diffent .
I drilled two holes on the plate and I did use same original screws.

I just wanted to say once it was installed, It worked great.

Thank you,

Sam
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
John from Pittsburgh, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPY04000066
Lower heating element not working
I removed the two screws that held in the old part. I pulled the element out a few inches.I disconnected two wires from the old element and connected it to the new. Using the screws provided I reconnected the unit. All went well. No need for repairman. 1
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Steve from Highland Village, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPY04000066
lower element burned out - had to replace
no instructions on how to replace element. first i removed the 2 screws that held the element to the oven. then i pulled the element out with the wires attached. at first i couldn't tell how the wires were attached - i thought they may have been soldered on. it took awhile for me to figure it out the wires were attached to a part that pulls up off the element part. no solder was needed. after i figured that out, easy to pull the part up off the element part.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
24 Reviews
4.7
out of 5
Filter By Rating:
  • 5 Stars
    20
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    1
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5
-
Verified Purchase
Part was perfect and saved us lots of money.

Excellent product and the person on the phone was super. Installation was easy.

5
-
Verified Purchase
Easy repair

Received the part as expected. Installed it and now oven is working again. Thanks for your help in installing the part.

5
-
Verified Purchase
Easy!

The parts selector worked great. The part arrived in less than two days! The installation was a breeze. The price was fair! I only wish all the repairs were so quick and easy. Thank you.

5
-
Verified Purchase
easy to install ourselves

The part was the exact one we needed and easy to install thanks to instructions sent in the email confirmation.

5
-
Verified Purchase
Perfect and easy 15 minutes tops

Perfect

5
-
Verified Purchase
Easy repair

This was much easier to install that I anticipated. It works great. My oven is old enough I was afraid I would have to replace it.

5
-
Verified Purchase
Excellent.

Just exactly what I wanted. Delivery was very swift.

5
-
Verified Purchase
Range Bake Element

Yes the part was right, shipping and delivery was fast ,working in time to .make Christmas dinner.

5
-
Verified Purchase
Was easy to repair

My only complaint - is slowness in receiving.

5
-
Verified Purchase
I was first surprised how fast I received the part. I ordered on a Monday and received on Tuesday afternoon (standard postage). My son had the new element installed within a hour.

The new element works wonderfully.

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11757472
Manufacturer Part Number: WPY04000066
Brand
Model Number
Description
Maytag
1255AF-CLW
Wall Oven - Wall, Electric
Maytag
1255AF-CLZ
Wall Oven - Wall, Electric
Maytag
1255WF-CLW
Wall Oven - Wall, Electric
Maytag
1255WF-CLZ
Wall Oven - Wall, Electric
Admiral
1265H-EZW
Wall Oven - Wall, Electric
Admiral
1365H-EZW
Wall Oven - Wall, Electric
Admiral
1365HW-EZW
Wall Oven - Wall, Electric
Kenmore
21134
Range - Kenmore Range/Stove/Oven Model 21134(1988) Parts
Kenmore
21135
Range - Kenmore Range/Stove/Oven Model 21135(1988) Parts
Jenn-Air
21136
Wall Oven - Built-in, Electric
Jenn-Air
21137
Wall Oven - Built-in, Electric
Kenmore
62921136
Wall Oven
Kenmore
62921137
Wall Oven
Maytag
77B-4CXWM5P
Range - Maytag Range/Stove/Oven Model 77B-4CXWM5P (77B4CXWM5P, 77B 4CXWM5P) Parts
Maytag
77B-4M5P
Range - Maytag Range/Stove/Oven Model 77B-4M5P (77B4M5P, 77B 4M5P) Parts
Magic Chef
77E-5EXWW
Wall Oven - Electric
Magic Chef
77EN-5EXWW
Wall Oven - Electric
Magic Chef
77F-5EXWW
Range - Magic Chef Range/Stove/Oven Model 77F-5EXWW (77F5EXWW, 77F 5EXWW) Parts
Magic Chef
77FK-5EXWM
Microwave Oven Combo - Electric
Magic Chef
77FK-5EXWW
Wall Oven - Electric
Magic Chef
77FN-5EVWM
Microwave Oven Combo - Electric
Magic Chef
77FN-5EVWW
Wall Oven - Electric
Magic Chef
77FN-5EXWM9
Microwave Oven Combo - Electric
Magic Chef
77JK-5EXWM
Microwave Oven Combo - Electric
Magic Chef
77JN-5EVWM
Microwave Oven Combo - Electric
Maytag
79F-5EXW
Range - Maytag Range/Stove/Oven Model 79F-5EXW/15X (79F5EXW/15X, 79F 5EXW/15X) Parts
Magic Chef
79FK-5EXW
Wall Oven - Electric
Magic Chef
79FN-5EVW
Wall Oven - Electric
Roper
8617*0A
Refrigerator - Refrigerators*
Whirlpool
8617^0A
Refrigerator

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2020, Eldis Group Partnership. All rights reserved.