Maytag/Maytag_Thumb/31818.gif
See part 6 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Spark Ignition Electrode

★★★★★
★★★★★
6 Reviews

Rated by 13 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your AGDS902E-P1131828NE!
 Fits your AGDS902E-P1131828NE!
PartSelect Number PS11757464
Manufacturer Part Number WPY0316773
Manufactured by Whirlpool
Product Description

Spark Ignition Electrode Specifications

This spark ignition electrode lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition electrode reaches a certain temperature, it creates a spark. This electrode comes with the mounting bracket you will need to successfully install the part. Before installing your new part, shut off the gas supply and unplug your appliance. This part cannot be repaired. If it is damaged or faulty, it must be replaced.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light | Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Amana, Caloric, Jenn-Air, Maytag.
Part# WPY0316773 replaces these:
AP6024114, 0316773, 74011790, 7432P139-60, Y0316773
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doris
November 28, 2017
None of the burners will light. No sparks. The stove will light with a match when gas is turned on. None of the burners will light....no problems before today.
For model number ACF3355AW
Hi Doris, Thank you for your question. I would suggest testing either your igniter switches harness or your spark module. Either of those two parts could be the issue for you. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Cheeming
January 27, 2018
Does this part fit my gas cooktop? Thank you.
For model number AKS3040SS
Hi Cheeming, Thank you for your question. Yes, this part works with your appliance. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Patricia
January 21, 2020
I only need the clip to hold the ignitor in place. The other clip broke when i was cleaning the cooktop.
Hello Patricia, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 3.7 / 5.0, 13 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Broken Electrode, no spark
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner
  • HUY from ALISO VIEJO, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
50 of 60 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would not ignite when control in "light" position
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the electrode wire to the electrode. drop the burner assembly back into position on the cooktop. Attach the burner assembly using two screws.
  • Michael from Friendswood, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
22 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas burner wouldn't ignite. No Spark
Replaced the spark igniter which had been broken.
Great response and shipping time, even though one part was back ordered. Works perfectly!
Other Parts Used:
DISCONTINUED
  • D, from Imbler, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
onlly 1 burner working
removed 2 screws on each burner and disconnened wire . replaced module so the top of range had to be lifted. Shut powder to unit. removed wires one at atime and connected to the new module, then reinstalled wires and screws to burners. very simple task
Other Parts Used:
Spark Ignition Module with Bracket
  • peter from metairie, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignition electrode broke
Removed the two screws that hold the element in place. Disconnected the wire to the electrode. The screw holding the electrode to the burner plate would not unscrew so I had to drill out the screw in order to replace it with the new ignition electrode. A little more time involved but if the screw would have come out it would have been a 10 minute job.When I ordered the part from you it came very quickly and I will certainly use you again when I have any other issues.
  • Gary from Glenwood Springs, CO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
none of the burners would light
I removed all 4 burners 2 screws holding each,replaced the ignition module,wire for wire,reassembled after cleaning the stovetop.I,m my wife's hero.
  • charles from hillsboro, OR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cracked ignitors (2)
No problem removing the burners. Removing the old initors was a different story. The tiny screws that hold the ignitor in place were baked in and could not be removed with a screw driver. I drilled them and tried to use an easy out to no avail. The screws are very short so I had to use care not to drill thru the burner. Both screw heads did snap off. I resorted to a hi temp epoxy to secure the ignitor flanges to the burner and now the all burners ignite as designed.
  • Robert from Philadelphia, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace Ignition Electrode gas range
Wow, ordered the part here and it arrived in 18 hours!! Job was fairly straight forward but the screw holding it in place was corroded and stuck. Several heating and cooling cycles with a torch and some spray lube and lots of patience and I finally rocked the screw lose.
  • Wayne from Woodstock, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The spark was no longer igniting the burner
The earlier reviews said very easy and 15 minutes for beginners. They were right on, except I could not get the old screw out no matter what I tried. I eventually had to drill it out and put in a self tapping new screw. This was a first for me. Then it took 15 minutes or less and works fine again. Hopefully next time someone will tell me how to get that old screw out faster.
  • Stanley from St. Louis, MO
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench set
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no spark
I used your instructions
  • Richard from ROLLING MDWS, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
4.5
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    3
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757464
Manufacturer Part Number: WPY0316773
Brand
Model Number
Description
Amana
ACC3660AB
Cooktop
Amana
ACC3660AB-PACC3660AB0
Range - Amana Range/Stove/Oven Model ACC3660AB-PACC3660AB0 (ACC3660ABPACC3660AB0, ACC3660AB PACC3660AB0) Parts
Amana
ACC3660AS
Cooktop
Amana
ACC3660AS-PACC3660AS0
Range - Amana Range/Stove/Oven Model ACC3660AS-PACC3660AS0 (ACC3660ASPACC3660AS0, ACC3660AS PACC3660AS0) Parts
Amana
ACC3660AW
Cooktop
Amana
ACC3660AW-PACC3660AW0
Range - Amana Range/Stove/Oven Model ACC3660AW-PACC3660AW0 (ACC3660AWPACC3660AW0, ACC3660AW PACC3660AW0) Parts
Amana
ACF3315AK
Range
Amana
ACF3315AT
Range
Amana
ACF3325AB
Range
Amana
ACF3325AC
Range
Amana
ACF3325AS
Range - Downdraft, Gas
Amana
ACF3325AW
Range - Gas
Amana
ACF3335AB
Range
Amana
ACF3335AB-PACF3335AB2
Range - Amana Range/Stove/Oven Model ACF3335AB-PACF3335AB2 (ACF3335ABPACF3335AB2, ACF3335AB PACF3335AB2) Parts
Amana
ACF3335AC
Range
Amana
ACF3335AC-PACF3335AC2
Range - Amana Range/Stove/Oven Model ACF3335AC-PACF3335AC2 (ACF3335ACPACF3335AC2, ACF3335AC PACF3335AC2) Parts
Amana
ACF3335AS
Range - Downdraft, Gas
Amana
ACF3335AW
Range
Amana
ACF3335AW-PACF3334AW1
Range - GAS RANGE
Amana
ACF3335AW-PACF3335AW2
Range - Amana Range/Stove/Oven Model ACF3335AW-PACF3335AW2 (ACF3335AWPACF3335AW2, ACF3335AW PACF3335AW2) Parts
Amana
ACF3355AB
Range - Downdraft, Gas
Amana
ACF3355AB-PACF3355AB1
Range - Amana Range/Stove/Oven Model ACF3355AB-PACF3355AB1 (ACF3355ABPACF3355AB1, ACF3355AB PACF3355AB1) Parts
Amana
ACF3355AC
Range - Downdraft, Gas
Amana
ACF3355AC-PACF3355AC1
Range - Amana Range/Stove/Oven Model ACF3355AC-PACF3355AC1 (ACF3355ACPACF3355AC1, ACF3355AC PACF3355AC1) Parts
Amana
ACF3355AS
Range - Downdraft, Gas
Amana
ACF3355AS-PACF3355AS1
Range - Amana Range/Stove/Oven Model ACF3355AS-PACF3355AS1 (ACF3355ASPACF3355AS1, ACF3355AS PACF3355AS1) Parts
Amana
ACF3355AW
Range
Amana
ACF3355AW-PACF3355AW1
Range - Amana Range/Stove/Oven Model ACF3355AW-PACF3355AW1 (ACF3355AWPACF3355AW1, ACF3355AW PACF3355AW1) Parts
Amana
ACF3375AB
Range
Amana
ACF3375AC
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service