Quick Question!

Have you ever purchased from PartSelect.com before?

11757464-1-S-Whirlpool-WPY0316773-Spark Ignition Electrode
11757464-1-S-Whirlpool-WPY0316773-Spark Ignition Electrode 11757464-2-S-Whirlpool-WPY0316773-Spark Ignition Electrode 11757464-3-S-Whirlpool-WPY0316773-Spark Ignition Electrode https://www.partselect.com/Schematics/Maytag/31818.gif

Spark Ignition Electrode

Your Price

$17.94
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11757464
Manufacturer Part Number WPY0316773
Manufactured by Whirlpool

This spark ignition electrode lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition electrode reaches a certain temperature, it creates a spark. This electrode comes with the mounting bracket you will need to successfully install the part. Before installing your new part, shut off the gas supply and unplug your appliance. This part cannot be repaired. If it is damaged or faulty, it must be replaced.

This part works with the following brands: Amana.

This part works with the following products: Range, Cooktop.

This part fixes the following symptoms:

  • Will Not Start.
  • Gas igniter glows, but will not light.
  • Element will not heat.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 11 reviews What's this?
1-11 of 11
 

46 of 55 people found this instruction helpful

Parts Used:
  • Spark Ignition Electrode
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: HUY from ALISO VIEJO, CA

Broken electrode, no spark

Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 19 people found this instruction helpful

Parts Used:
  • Spark Ignition Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Michael from Friendswood, TX

Burner would not ignite when control in "light" position

Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the electrode wire to the electrode. drop the burner assembly back into position on the cooktop. Attach the burner assembly using two screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: D, from Imbler, OR

Gas burner wouldn't ignite. No spark

Replaced the spark igniter which had been broken.
Great response and shipping time, even though one part was back ordered. Works perfectly!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: peter from metairie, LA

Onlly 1 burner working

removed 2 screws on each burner and disconnened wire . replaced module so the top of range had to be lifted. Shut powder to unit. removed wires one at atime and connected to the new module, then reinstalled wires and screws to burners. very simple task

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
  • Spark Ignition Electrode
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Gary from Glenwood Springs, CO

Ignition electrode broke

Removed the two screws that hold the element in place. Disconnected the wire to the electrode. The screw holding the electrode to the burner plate would not unscrew so I had to drill out the screw in order to replace it with the new ignition electrode. A little more time involved but if the screw would have come out it would have been a 10 minute job.When I ordered the part from you it came very quickly and I will certainly use you again when I have any other issues.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Spark Ignition Electrode
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: charles from hillsboro, OR

None of the burners would light

I removed all 4 burners 2 screws holding each,replaced the ignition module,wire for wire,reassembled after cleaning the stovetop.I,m my wife's hero.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Spark Ignition Electrode
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Robert from Philadelphia, PA

Cracked ignitors (2)

No problem removing the burners. Removing the old initors was a different story. The tiny screws that hold the ignitor in place were baked in and could not be removed with a screw driver. I drilled them and tried to use an easy out to no avail. The screws are very short so I had to use care not to drill thru the burner. Both screw heads did snap off. I resorted to a hi temp epoxy to secure the ignitor flanges to the burner and now the all burners ignite as designed.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Spark Ignition Electrode
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Wayne from Woodstock, IL

Replace ignition electrode gas range

Wow, ordered the part here and it arrived in 18 hours!! Job was fairly straight forward but the screw holding it in place was corroded and stuck. Several heating and cooling cycles with a torch and some spray lube and lots of patience and I finally rocked the screw lose.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Spark Ignition Electrode
Level of Difficulty: Difficult
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers, Wrench set
Customer: Stanley from St. Louis, MO

The spark was no longer igniting the burner

The earlier reviews said very easy and 15 minutes for beginners. They were right on, except I could not get the old screw out no matter what I tried. I eventually had to drill it out and put in a self tapping new screw. This was a first for me. Then it took 15 minutes or less and works fine again. Hopefully next time someone will tell me how to get that old screw out faster.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Spark Ignition Electrode
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Timothy from Naperville, IL

Range would not lite

diagram on website was very helpful. simply unscrew two screws,remove and replace electrode and works perfectly.
Ordered one day arrived next with standard shipping installed before next day supper awesome service

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Spark Ignition Electrode
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Emily from Silver Spring, MD

Ignition no longer work

It was really easy because I read information on your site. I only had to unscrew 3 screws, remove the old spark ignition electrode, replace the new one and then screw the 3 screws back. It was great

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-11 of 11

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11757464
Manufacturer Part Number: WPY0316773
Brand Model Number Description
AmanaACC3660ABCooktop
AmanaACC3660ASCooktop
AmanaACC3660AWCooktop
AmanaACF3315AKRange - Gas
AmanaACF3315ATRange - Gas
AmanaACF3325ABRange - Gas
AmanaACF3325ACRange - Gas
AmanaACF3325ASRange - Downdraft, Gas
AmanaACF3325AWRange
AmanaACF3335ABRange
AmanaACF3335ACRange
AmanaACF3335ASRange - Downdraft, Gas
AmanaACF3335AWRange - Downdraft, Gas
AmanaACF3355ABRange
AmanaACF3355ACRange
AmanaACF3355ASRange
AmanaACF3355AWRange - Downdraft, Gas
AmanaACF3375ABRange
AmanaACF3375ACRange
AmanaACF3375ASRange
AmanaACF3375AWRange
AmanaACG200Cooktop
AmanaACL200Cooktop
AmanaACS200*Cooktop
AmanaACS200CCCooktop
AmanaACS200ECooktop
AmanaACS200S*Cooktop
AmanaACS200SSCooktop
AmanaACS200SxCooktop
AmanaACS200WWCooktop