See part 20 in the diagram
( Grid squares measure 1x1 inch )
Condensor Fan Blade - Black
$
31.16
On Order
On Order
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11757435
Manufacturer Part Number WPY01110041
Manufactured by
Whirlpool
Product Description
Condensor Fan Blade - Black Specifications
This fan blade is used with some dehumidifiers. At just under 10 inches long, it is black and comes with a retaining clip and screw. This part may bend or break over time and will need to be replaced. If the fan blade is not working you will not hear the fan blowing air across the coils when it is turned on. This could cause the dehumidifier to freeze up. You will need to remove the front panel and take the motor out to access this part. This is an OEM part that comes right from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dehumidifier.
This part works with the following products:
Crosley, Maytag, Amana, Admiral.
Part# WPY01110041 replaces these:
01110037, 01110041, 18326-1, 18391-1, Y01110037, Y01110041
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The old blade separated from the shaft.
Removed all screws from the outside case, then I had access to the motor. Removed 4 screws from the bracket holding the motor assembly in place, removed it from the case. Next I pulled off the broken fan part, installed the new blade and secured it with the supplied bracket. Next I installed the motor assembly in reverse with the 4 screws I removed earlier. I made sure the blade would move freely, no wire in the way. Also, when you remove the motor assembly you will have to remove the motor wires from their attachment points, but is easy, they are just "plugged" in. In any case I recommend you make a small drawing/schematic as to where the wires go for proper hookup later. The last thing is to put the case cover back on, line up the holes and insert the screws you removed earlier. The unit has been running like new now!!
-
William from Oriskany, NY -
Difficulty Level:Really Easy -
Total Repair Time:15 - 30 mins -
Tools:Screw drivers -
Parts Used:WPY01110041
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757435
Manufacturer Part Number: WPY01110041
Manufacturer Part Number: WPY01110041
Brand
Model Number
Description