This is a manufacturer-approved replacement drain pump for your washing machine. To complete this repair you will need a 1/4 inch nut driver, 5/16ths nut driver, a flat blade screwdriver, and a pair of pliers. Make sure to disconnect power to the washer before beginning this repair.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Washer Washer Drain Pump
Troubleshooting
This part fixes the following symptoms:
Will not drain | Leaking | Burning smell | Will Not Start
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert T - May 21, 2023
Verified Purchase
great part
received part quietly ,washer hasn't run this good in years .thanks good support team with helping with the problem. thanks so much
★★★★★
★★★★★
Tom H - April 12, 2023
Verified Purchase
Fast and easy
The pump got here in about 3 days. Had detailed instructions how to install the pump. Installed everything worked out great
★★★★★
★★★★★
Chad B - March 26, 2023
Verified Purchase
With a busy family, chaos occurred when the washing machine goes down.
I looked up the the part on Parts Select. Ordered the part. Waited four day for the part to to deliver to my home. Put the part in with the help of a video on the Parts Select website. Then slowly watch the mountain on dirty clothes disappeare.
★★★★★
★★★★★
Marca J - October 24, 2022
Verified Purchase
Washer repair.
The part arrived in a timely matter. Was easy to instal and is working wonderfully.
★★★★★
★★★★★
Peter P - June 18, 2022
Verified Purchase
Washer Pump better than original
Washer pump appears to be made more durable than the original part.
Drain plug is easier to remove than the original.
Part fit and operated perfectly.
★★★★★
★★★★★
Brian S - June 15, 2022
Verified Purchase
Easy repair. Quick delivery. Watch the PartSelect.com video!
Washer wouldn't drain. Door wouldn't unlock. No Error codes were given. This part worked! Watch the PartSelect.com video.
★★★★★
★★★★★
Scott D - March 23, 2022
Verified Purchase
worked as stated
easy to install
★★★★★
★★★★★
Gary W - March 19, 2022
Verified Purchase
Easy repair
The part was fine. It didn’t fix my issue.
March 22, 2022
Hi Gary,
Thank you for your review. We are sorry to hear that the part did not fix the issue with your washer. If you need help to verify the part you need, please call our customer service line and anyone will be happy to assist you.
★★★★★
★★★★★
Kirk C - January 9, 2022
Verified Purchase
I fixed it myself!!
East to find, easy to purchase and easy to install. Wish I would have done it sooner.
★★★★★
★★★★★
Steven C - December 16, 2021
Verified Purchase
Easy Repair.
Easy repair with exact replacement. Video tutorial supplied was spot on.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 33 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
no drain, and pin hole in hose causing slight leak
The most time consuming part was fitting the hose back on because of the confined space. Once on the rest was a snap. The drain pump installed just the same as the video, so watch the video! I think in total it took about 30 minutes to complete.
Unplugged washer , used shop vac to drain water through drain hose on washer. Removed both hoses from old pump. Removed electric plug, removed 2 screws from bottom of the pump. Then reverse the process.
Tom from HEBRON, IN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
pump would not pump out the water in the tub
just changed out the pump. easy
Ron from LITTLETON, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer would'nt drain
Son-in law did the work he was finished in about 20 minutes the repair guy wanted $249.00 to take out and put in. PLUS part.
RICHARD from SANTA CLARITA, CA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It wouldn't drain anymore so I started looking on the internet for a solution. I came upon this website and found the part I needed. It was easy to install. It fixed the problem I had with the washer.
I just took off the old part and installed the new one. The new part was a bit different.
Ricardo from DETROIT, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F 21 code kept appearing even though trap clean out was clear.
Replaced drain pump took longer to soak up water than actually replacing the pump motor with mine having the pedestal underneath I did not have to tip the washer at all so it was fast and easy. Three screws taking the front cover off a screwdriver lifting the Rubber and sliding the motor off and pair of pliers 4 to hose clamps making it a breeze.
Michael from LUCKEY, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not drain flashing f-21 code
Took it old pump and replaced with new pump VERY EASY
Casey from REXBURG, ID
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problem as instructed.
As video instructed
John from BOYLSTON, MA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace the pump motor
First tilt the washer back so you can drain water from the lines to the pump and the pump itself. Disconnect the lines with a pair of pliers and use a screwdriver to move the rubber stopper so that the pump will move to the right. With pump now in position to lift up and out of the washer , do it so you can disconnect the wire assembly. Replace the pump starting with the wires, then slide it in place and secure it with the rubber stopper. Attach the lines and make sure they are well sitted and clamped. set on feet and you are ready to wash.
Jay from MALVERN, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer drain pump had to be replaced.
Unplugged the washer from electric outlet. Removed front cover by using nut driver to remove the two screws. Drained the water from the washer into a pan by loosening the cap on the filter. Removed the two hoses by compressing clamps with pliers. Unplugged the electric wire from old pump. Used screw driver to pry rubber feet of old pump loose from washer floor panel. Set old pump aside. Installed new pump using a little dish soap to help attach rubber feet to washer. Attached the two hoses using pliers. Plugged electric wire into new unit. Ran washer to check for leaks. Replaced front cover using nut driver on the two screws.
John from ARMINGTON, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
57 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Samuel
December 5, 2018
Code#f9e1
Hi Samuel,
Thank you for your question. The F9 E1 error code is referring to a long drain. If the drain exceeds 8 minutes, the valves will turn off and the pump will stop running. If too much soap was used, the excess suds can cause this code to appear. You should also check to see if the drain hose is blocked or has a kink in it. Make sure the drain hose is not sealed into the drain pipe. Make sure the drain hose does not exceed 96 inches. Make sure that their is no debris in the drain pump. Check to make sure the pressure hose is not pinched, kinked, plugged or leaking air. I hope this helps. Thank you and have a great day!
43 people found this helpful.
Was this helpful?
Thank you for voting!
Kenny
February 20, 2018
I keep getting codes f21 and sd . Drain hose are not in a bind and not extra suds. Can you give me any idea? Most often the f 21 code. Thanks Kenny
For model number WFW8410SW01
Hi Kenny, Thank you for the question. F21 means the washing machine has a water draining issue. The drain pump itself, or the drain hose is clogged. Since the hose is good, I suggest checking the drain pump, if the pump is not clogged you may need to have it replaced. At times suds can build up in the pump and the machine finds it really hard to clear them out. You may need to remove it and clean it out manually. Also make sure you are using the correct type of detergent in the correct amounts. Hope this helps!
29 people found this helpful.
Was this helpful?
Thank you for voting!
Terry
November 23, 2017
Do you sell the plug that screws in the front of the drain pump? It has a crack in it from the old owners taking a pair of pliers to remove the plug.
For model number WFW9250WW00
Hi Terry, Thank you for the question.The Pump Filter is not sold sepratly from the pump assembly. In order to have it replaced you will need to order a new pump. Hope this helps!
18 people found this helpful.
Was this helpful?
Thank you for voting!
Rudy
November 6, 2017
My washer is not working, it locks the door but it will not start. What can be the issue i replaced the lock panel and that wasn't the problem what part do you suggest is failing?
For model number Wfw9150ww01
Hi Rudy,
Thank you for your inquiry. Where you have already replaced the the there are some parts that you will need to check to see which one is causing the issue. You will need to check the temperature sensor, the drain pump, the door strike and the drive belt. I hope this helps. Thank you and have a great day!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Sheila Oakley
July 31, 2018
My washer will only spin one time then stop.The door will lock ,make a humming noise then starts to beep.Water is still in the washer.
For model number Wfw9050xw00
Hi Sheila,
Thank you for your question. If the washer is only spinning once and then stops, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the drain pump, the drive belt, and the door lock latch. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
April
December 13, 2017
Has anybody had the impeller fall off .Got a new pump assembly washed 2 loads of clothes when it wouldn't pump again do to impeller loose
For model number wpw 10730972
Hi April,
Thank you for your question. Yes, sometimes they do break off. Before checking to see if they are broken, unplug the appliance from the electrical outlet and pull it out from the wall. To verify if they are broken, put your finger into the drain outlet and feel the impellers if the pump freely turns. One or more of them may be broken. If so, you'll be able to feel them while you are turning the pump flywheel with your other hand. You also may see broken pieces of plastic in the bottom of the pump housing. There is a video on our website that you can reference on how to remove and install a washing machine drain pump so you can check the impellers. The washing machine may not show exactly like the one you have and the pump may be different, but it will give you a general idea on how to install the part. You will find the video under part number PS11757304. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
January 10, 2019
Washer seemed to be running longer than normal. Put my hand on the drain pump. It was hot. Is that normal. It works and drains the tub.
For model number WFW9150WW01
Hello Bill, thank you for your question. You may want to remove the pump to be sure there are no blockages. The pump will get warm but shouldn't be hot to the touch. I hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Jesus
April 11, 2018
This washer stop pumping water. A new pump was installed. The hoses were checked for clogging and were found to be free. After the new pump installation the washer still does not empty the water. Please advise. Thanks jesus.
For model number WFW9150WW00
Hi Jesus,
Thank you for your question. If you have replaced the pump and the water is still not pumping out, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the temperature sensor, the trap and the water level pressure switch. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
David
August 27, 2019
Hi, i am searching for the drain pump on my washing machine, part #w10130914 but can’t seem to find a replacement? Has it been replaced with a different part #? Thanks
For model number Maytag 3000 series front load
Good Day David. Thank you for your question in regards to your unit. In order for us to assist you we will need the full model number of your unit so we can research into finding the right compatible parts. If you are having difficulty locating your model number we would recommend reaching out to the manufacturer as they should be able to assist you finding it. Best Regards.
3 people found this helpful.
Was this helpful?
Thank you for voting!
David
June 27, 2019
Cant i just replace the moter
For model number 11047512601
Hello David, thank you for writing. The Drive Motor for your model is part PS11748956.
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757304
Manufacturer Part Number: WPW10730972
