Quick Question!

Have you ever purchased from PartSelect.com before?

11757278-1-S-Whirlpool-WPW10717210-Lint Filter
11757278-1-S-Whirlpool-WPW10717210-Lint Filter 11757278-2-S-Whirlpool-WPW10717210-Lint Filter https://partselectcom.azureedge.net/Schematics/Maytag/6ZPRDMKD.gif

Lint Filter

Your Price

$33.09
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11757278
Manufacturer Part Number WPW10717210
Manufactured by Whirlpool

This lint filter is a manufacturer-approved replacement part for your dryer. Replacing this part it easy, simply remove the old lint filter and slide the new one in place. Make sure to empty the lint filter after every use of the dryer, and check the filter slot for excess buildup of lint, which can be a fire hazard.

This part works with the following brands: Kenmore, Whirlpool, Maytag, Amana, Crosley, Inglis, Roper, Admiral, Estate, Magic Chef.

This part works with the following products: Dryer.

This part fixes the following symptoms:

  • Takes too long to dry.
  • No heat or not enough heat.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

What is the length of srceen?

Jerry for model number 110.87670100
Answer:

Hello Jerry, thank you for contacting us. The part is shown on a grid with 1 inch squares, it looks to be approx 20" in length not including the handle. I also looked up the part by your model number and this would be the correct filter. Hope this helps!

4 people found this helpful.

Most Recent

Question:

Hey i seen what my replacement is and all the cross reference part numbers are on your site here. Thank you Whirlpool for providing us customers with such information. Greatly appreciated!! however i do have one question if you don't mind. i know it is not advised, warrantied, or in any way shape or form whirlpools responsibility if anything on the product shall go wrong if any modifications are made. in saying that, can one possibly make his own lint filter? or as i've known them to be called "lint trap". seems like all id need is measurements, some screen material, the existing lint filter frame or in my case find a way to add about 3" onto the bottom of it considering i was cut off from a lousy appliance repairman in my old town before i moved. i'd normally just take it back and have them fix it. i'm rather good with my hands, tools, and mechanical/operational background. i've restored classic muscle cars since i was younger which progressed into a passion/career. plus little (tinkering) things like such gives me just the right amount of free time away to myself that i need in my crazy life. thank you much.

Robert for model number LER6636PW0
Answer:

Hi Robert, That is a good question. It is always best for the correct operation of the dryer to use lint filter designed for it. I hope this helps. Thank you and have a great day!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 26 reviews What's this?
1-15 of 26
 

429 of 437 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Daniel from Wichita, KS

Door catch broken; lint filter handle had come off

Removed some screws and partially dismantled the door so I could get the old catch out. Inserted the new catch, and put the screws back in. Saved me an $80+ service call.
On the filter, I had to use pliers to remove the old one because the handle had broken off. Did that, and inserted the new one. Done. Sears had been unable to supply me with a new filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

62 of 72 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Kent from Sebastopol, CA

No heat - everything else was functional

After 30 miutes of research on this website I felt confident to investigate the problem. Removal of the back cover is straightforward. Initially I did not appreciate and obstruction of the ductwork exitting the dryer. I bypassed the thermal fuse by removing the wires and temporarily taping them together and heat was restored. Knowing flow was OK exitting the dryer I investigated flow from the lint trap to the blower motor which is where the problem was located. In our case the lint filter was torn allowing many small objects and lint to near completely clog the pathway between the lint trap and the blower motor. It was difficult to appreaciate how obstructed that pathway was without removing the entire channel from the machine which was simple and required removing two screws at the lint trap opening followed by 3-4 screws on the back of the channel. Once removed, it was easy to appreaciate the debris clogging the channel and was easy to clean with a hose and running water. Replacement was a snap. The parts were oredered and sent in a day. I prophylactically replaced thermastats based upon a recommendation from another website. Replacing previous parts with new parts was a snap. Out the door we were up and running for around $100 (including new thermostats). The dryer repair man may go the way of the dinosaur.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

30 of 31 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Richard from Fairfax, VA

Needed lint filter for my old kenmore dryer that was no longer manufactured by sears.

Lint filter supplied by Parts Select was an exact replacement by an aftermarket manufacturer. I put the old one and the new one side by side and they were identical (of course, the handle wasn't broken off on the new one!). I coulnd't be happier. It arrived at my house 2 days after I ordered it. I highly recommend Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

20 of 20 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Chris from Morgan City, LA

Old lint screen -torn at wire mesh

Local stores did not have any in supply. Went to Partselect and located lint screen, ordered, received in 3 days. replaced screen, Wife now happy again...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 21 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Bill from Farmington Hills, MI

The old lint screen on the dryer was broken

I analyzed the situation to see how to remove the old lint screen. I carefully pulled out the old lint screen. I was careful not to drop it. With caution, I placed the old lint screen in the trash receptacle that was nearby. Next, I opened the box that the new lint screen came in with a sharp knife. I removed the new lint screen from the box, took off the plastic wrap and inserted the lint screen in the same slot that the old one used to be in. I tested that it was seated correctly by pulling it out and reseating it in the slot. The true test came when I ran my first load of laundry through the dryer. The total repair time for this fix was 14.92 seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

18 of 28 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: John from Bristol, CT

Part number was different from the original, but it fit just fine.

installed the new dryer lint screen, it fit perfectly
and is now in operation.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 8 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ed from Greensboro, NC

Replace lint filter

with both hands

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 8 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Michael from Kingman, AZ

Old screen failed ripped needed replaced.

After researching and finding correct replacement unit placed order and waited to receive. Screen is located top of dryer so replacement simple and fit was perfect.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Connie from Gaithersburg, MD

Handle broke on filter

just slide the new filter in.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Don from Dayton, TX

Lint filter wore out had to be replace

Changed out the lint filter

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 6 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Claude from Austin, TX

Lint filter wore out.

It required no tools, just take out the old torn filter and slip in the new one. I should have ordered it a year ago, with the ease of the website and the delivery via Fed Ex. super easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Gerard from Huntington, WV

No heat in dryer and lint filter torn

Dryer didn't heat. I got the heating element thru sears and when I ordered it I thought I should also order the thermostats but I didn't. Element arrived two days after ordered right on time. Slipped right in in a few minutes. Turned dryer on. No heat. Went back to drawing board. Watched videos on part select site and realized I needed thermostats. Ordered them and lint filter. Arrived right on schedule and also slipped in in no time flat. Turned dryer on and yes it heated perfectly. Wife was pretty impressed with new lint filter as other one was torn with jagged edges. MY SUGGESTION: if your dryer doesn't heat and you can't test each individual item thermostats and heating element order the three of them ( high limit and cycling thermostats and heating element) cause they'll probably will all go at the same time anyway. Then won't have to wait on the second shipment if things don't work with partial replacement. Parts select was great and videos are well understood and easy to follow. Would certainly use again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Evelyn from JACKSONVILLE, FL

Needed a new lint filter

Took the old one out, replaced it with new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Stacey from Corinth, TX

The handle had broken on the lint filter so I had fashioned paper clips into the holes to get the filter out

after i got the replacement filter, it fit perfectly. the filter is white & my dryer is beige but i don't care...i'm just happy i have a good lint filter again, for my at least 30 year old dryer....thanks part select!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Lint Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ronald from Anaheim, CA

Broken handle on lint filter

received part 4 days after order. very pleased about that! Local Sears Service center was out of stock.

carefully removed old "handleless" lint filter.
inserted new lint filter and Voila! success.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 26

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11757278
Manufacturer Part Number: WPW10717210
Brand Model Number Description
Kenmore1106012511Dryer - ELECTRIC DRYER
Kenmore11060222510Dryer - DRYER
Kenmore11060222511Dryer - ELECTRIC DRYER
Kenmore11060522900Dryer
Kenmore11060602990Dryer
Kenmore11060612990Dryer
Kenmore11060622990Dryer
Kenmore11060702990Dryer
Kenmore11060712990Dryer
Kenmore11060722990Dryer
Kenmore11060724990Dryer
Kenmore11060727990Dryer
Kenmore11060802990Dryer
Kenmore11060812990Dryer
Kenmore11060814990Dryer
Kenmore11060817990Dryer
Kenmore11060832990Dryer
Kenmore11060842990Dryer
Kenmore11060852990Dryer
Kenmore11060854990Dryer
Kenmore11060857990Dryer
Kenmore11061202010Dryer
Kenmore11061202011Dryer
Kenmore11061262311Dryer - ELECTRIC DRYER
Kenmore11061802000Dryer
Kenmore11061804000Dryer
Kenmore11061812000Dryer
Kenmore11061814000Dryer
Kenmore1106192310Dryer - ELECTRIC DRYER
Kenmore1106192311Dryer - ELECTRIC DRYER