Maytag/Maytag_Thumb/6ZPRDMKD.gif
See part 10 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Dryer Lint Screen Filter

★★★★★
★★★★★
124 Reviews
$ 54.30   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11757278
Manufacturer Part Number WPW10717210
Manufactured by Whirlpool
Product Description

Dryer Lint Screen Filter Specifications

This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. Check your user manual and model number to see if this is the right part for you. Make sure you empty the lint filter after every use of the dryer and check the filter slot for an excess buildup of lint, which can shorten the life of your filter and be a fire hazard. The screen is approximately 20 inches in length, not including the handle, and around 8.5 inches wide.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Takes too long to dry | No heat or not enough heat
This part works with the following products:
Dryer.
This part works with the following products:
Kenmore, Whirlpool, Maytag, Crosley.
Part# WPW10717210 replaces these:
AP6023930, 2006, 2007, 26000348851, 348851, 689465, 8211, 8219, 8557857, 8557882, 8558463, 8559787, 8565972, 99989680, 99989681, W10641634, W10717210, WPW10717210VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

43 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
October 7, 2017
What is the length of srceen?
For model number 110.87670100
Hello Jerry, thank you for contacting us. The part is shown on a grid with 1 inch squares, it looks to be approx 20" in length not including the handle. I also looked up the part by your model number and this would be the correct filter. Hope this helps!

14 people found this helpful.

Was this helpful?
Thank you for voting!
Kathy
November 26, 2018
The lint filter i need to know the width and length of it. Thank you
Hello Kathy, thank you for contacting us. The part is shown on a grid with 1 inch squares, it looks to be approx 20" in length not including the handle and about 8.5" wide. I also looked up the part by your model number and this would be the correct filter. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Diane
January 21, 2018
What dryer lint filter do i need for this dryer?
For model number wed4800xqo
Hi Diane, Thank you for your question. The part number listed for the lint filter under your model number is PS11757278. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
November 1, 2017
Hey i seen what my replacement is and all the cross reference part numbers are on your site here. Thank you Whirlpool for providing us customers with such information. Greatly appreciated!! however i do have one question if you don't mind. i know it is not advised, warrantied, or in any way shape or form whirlpools responsibility if anything on the product shall go wrong if any modifications are made. in saying that, can one possibly make his own lint filter? or as i've known them to be called "lint trap". seems like all id need is measurements, some screen material, the existing lint filter frame or in my case find a way to add about 3" onto the bottom of it considering i was cut off from a lousy appliance repairman in my old town before i moved. i'd normally just take it back and have them fix it. i'm rather good with my hands, tools, and mechanical/operational background. i've restored classic muscle cars since i was younger which progressed into a passion/career. plus little (tinkering) things like such gives me just the right amount of free time away to myself that i need in my crazy life. thank you much.
For model number LER6636PW0
Hi Robert, That is a good question. It is always best for the correct operation of the dryer to use lint filter designed for it. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Brian
July 10, 2019
Which is the correct lint trap replacement?Are your parts used or new? thanks !!
For model number WD4850bwo
The lint trap or chute for you model is PS12114318, and the filter is PS11757278. We only sell brand new parts.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Scott
September 20, 2019
I have an Admiral dryer model # aed4475tq1. The lint filter is a Whirlpool p/n 8557850.Will this filter fit my dryer
For model number Whirlpool Lint Filter P/N 8557850
Hello Scott, thank you for your question. Yes, the lint filter for this unit is PartSelect Number: PS11757278. Please enter the part number into the site for current price and availability. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Lynn
March 19, 2019
Do you still have a replacement dryer filter for this dryer?
For model number 86572120
Hello Lynn, thank you for your question. Lint Filter part PS11757278 is compatible to your model.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Sue
April 3, 2019
Is this part (lint filter screen) compatible with Maytag model number medc200xw3?
For model number MEDC200XW3
Hello Sue, Thank you for contacting us. I have researched the model you have provided and can confirm the PartSelect Number: PS11757278 is correct for your appliance. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Cecilia
April 25, 2019
Trying to find a replacement lint filter for Amana dryer model ngd4600yq2 serial no. M34328982 i can't find correct info to verify replacement parts. Don't want to order unless it will fit correctly. Thanks
For model number NGD4600YQ2
Hello Cecilia, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757278. Thank you for your inquiry, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Javier Cardenas
March 7, 2018
A mi secadora ya le cambie 3 veses el fusible de la resistencia se lo cambio nuevo trabaja alrededor de 30 minutos y se quema ya cheque la tuberia de salida y todo esta limpio tendre q cambiar el termostato y el fusible a la vez o cual seria su recomendacion gracias
For model number 11060922990
Hola Javier, gracias por la pregunta. Sí, se recomienda cambiar el termostato de límite alto, número de pieza: PS11741441 al mismo tiempo que el fusible. Buena suerte con la reparación!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Kenmore Dryer Dryer Lint Screen Filter

Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 26 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Door catch broken; lint filter handle had come off
Removed some screws and partially dismantled the door so I could get the old catch out. Inserted the new catch, and put the screws back in. Saved me an $80+ service call.
On the filter, I had to use pliers to remove the old one because the handle had broken off. Did that, and inserted the new one. Done. Sears had been unable to supply me with a new filter.
  • Daniel from Wichita, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
  • Parts Used:
    WPW10717210, 279570
440 of 462 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat - everything else was functional
After 30 miutes of research on this website I felt confident to investigate the problem. Removal of the back cover is straightforward. Initially I did not appreciate and obstruction of the ductwork exitting the dryer. I bypassed the thermal fuse by removing the wires and temporarily taping them together and heat was restored. Knowing flow was OK exitting the dryer I investigated flow from the lint trap to the blower motor which is where the problem was located. In our case the lint filter was torn allowing many small objects and lint to near completely clog the pathway between the lint trap and the blower motor. It was difficult to appreaciate how obstructed that pathway was without removing the entire channel from the machine which was simple and required removing two screws at the lint trap opening followed by 3-4 screws on the back of the channel. Once removed, it was easy to appreaciate the debris clogging the channel and was easy to clean with a hose and running water. Replacement was a snap. The parts were oredered and sent in a day. I prophylactically replaced thermastats based upon a recommendation from another website. Replacing previous parts with new parts was a snap. Out the door we were up and running for around $100 (including new thermostats). The dryer repair man may go the way of the dinosaur.
70 of 82 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed lint filter for my old Kenmore dryer that was no longer manufactured by Sears.
Lint filter supplied by Parts Select was an exact replacement by an aftermarket manufacturer. I put the old one and the new one side by side and they were identical (of course, the handle wasn't broken off on the new one!). I coulnd't be happier. It arrived at my house 2 days after I ordered it. I highly recommend Parts Select.
  • Richard from Fairfax, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WPW10717210
34 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old lint screen -torn at wire mesh
Local stores did not have any in supply. Went to Partselect and located lint screen, ordered, received in 3 days. replaced screen, Wife now happy again...
  • Chris from Morgan City, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WPW10717210
26 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old lint screen on the dryer was broken
I analyzed the situation to see how to remove the old lint screen. I carefully pulled out the old lint screen. I was careful not to drop it. With caution, I placed the old lint screen in the trash receptacle that was nearby. Next, I opened the box that the new lint screen came in with a sharp knife. I removed the new lint screen from the box, took off the plastic wrap and inserted the lint screen in the same slot that the old one used to be in. I tested that it was seated correctly by pulling it out and reseating it in the slot. The true test came when I ran my first load of laundry through the dryer. The total repair time for this fix was 14.92 seconds.
  • Bill from Farmington Hills, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WPW10717210
21 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part number was different from the original, but it fit just fine.
installed the new dryer lint screen, it fit perfectly
and is now in operation.
  • John from Bristol, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WPW10717210
19 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace lint filter
with both hands
  • Ed from Greensboro, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WPW10717210
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle broke on filter
just slide the new filter in.
  • Connie from Gaithersburg, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WPW10717210
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old screen failed ripped needed replaced.
After researching and finding correct replacement unit placed order and waited to receive. Screen is located top of dryer so replacement simple and fit was perfect.
  • Michael from Kingman, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WPW10717210
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat in dryer and lint filter torn
Dryer didn't heat. I got the heating element thru sears and when I ordered it I thought I should also order the thermostats but I didn't. Element arrived two days after ordered right on time. Slipped right in in a few minutes. Turned dryer on. No heat. Went back to drawing board. Watched videos on part select site and realized I needed thermostats. Ordered them and lint filter. Arrived right on schedule and also slipped in in no time flat. Turned dryer on and yes it heated perfectly. Wife was pretty impressed with new lint filter as other one was torn with jagged edges. MY SUGGESTION: if your dryer doesn't heat and you can't test each individual item thermostats and heating element order the three of them ( high limit and cycling thermostats and heating element) cause they'll probably will all go at the same time anyway. Then won't have to wait on the second shipment if things don't work with partial replacement. Parts select was great and videos are well understood and easy to follow. Would certainly use again.
  • Gerard from Huntington, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
124 Reviews
4.9
Filter By Rating:
  • 5 Stars
    116
  • 4 Stars
    5
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11757278
Manufacturer Part Number: WPW10717210
Brand
Model Number
Description
Kenmore
1106012511
Dryer - ELECTRIC DRYER
Kenmore
11060222510
Dryer - DRYER
Kenmore
11060222511
Dryer - ELECTRIC DRYER
Kenmore
11060522900
Dryer
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
11060622990
Dryer
Kenmore
11060702990
Dryer
Kenmore
11060712990
Dryer
Kenmore
11060722990
Dryer
Kenmore
11060724990
Dryer
Kenmore
11060727990
Dryer
Kenmore
11060802990
Dryer
Kenmore
11060812990
Dryer
Kenmore
11060814990
Dryer
Kenmore
11060817990
Dryer
Kenmore
11060832990
Dryer
Kenmore
11060842990
Dryer
Kenmore
1106085299
Dryer - Kenmore Dryer Model 110.6085299 (1106085299, 110 6085299) Parts
Kenmore
11060852990
Dryer
Kenmore
11060854990
Dryer
Kenmore
11060857990
Dryer
Kenmore
11061202010
Dryer
Kenmore
11061202011
Dryer
Kenmore
11061262311
Dryer - ELECTRIC DRYER
Kenmore
11061802000
Dryer
Kenmore
11061804000
Dryer
Kenmore
11061812000
Dryer
Kenmore
11061814000
Dryer
Kenmore
1106192310
Dryer - ELECTRIC DRYER

Get in touch, we're here to help!

Open until 10PM EST

Contact Customer Service