This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator including: the ice maker, ice bin, inlet valve, fill tube, and hardware. If your new ice maker does not function properly after being installed, check the freezer temperature. The freezer must to be around zero degrees Fahrenheit. Remember to disconnect the power and water supply to your refrigerator before beginning this installation. Make sure to check that your model is compatible with this part before ordering.
Note: The manufacturer has updated this part. It may differ in appearance but will function the same as the original.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Ice maker won’t dispense ice | Leaking
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
February 27, 2018
Does the ice maker for this model have a filter before the water intake to the freezer?
For model number ktrc22kkss00
Hi John, Thank you for the question. This model number does not come equipt with a water filter. The water supply that hooks up to the appliance would have to be ran through your in house water filtration system. Hope this helps!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Dane
December 13, 2017
The icemaker runs and the motor turns the shaft and fingers turns to remove the ice but the water does not fill the tray. The motor continues to move to turn the shaft but no water is flowing to the unit. Can you help me with this problem.
For model number ev187nyrso1
Hi Dane, Thank you for the question. I suggest testing the Water Inlet Valve with an Multi Meter. If the valve is getting power but does not have continuity, it will need to be replaced. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Andy
March 15, 2018
What is the difference between wpw10715708 and eckmf95 and eckmf94? Are they the same? Interchangeable?
Hi Andy,
Thank you for your question. Yes, part number WPW10715708 replaces part numbers ECKMF95 and ECKMF94. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
George
August 14, 2017
Water is leaking behind icemaker inside of freezer, could water line be loose?
For model number ET8WTEXMQ03
Hi George,
Thank you for your inquiry. The water line could be the issue and is something you may have to look into. You may also have to check the water inlet valve and the ice maker itself. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Stephen
January 26, 2018
I have frost buildup between the icemaker and the back wall of freezer. The icemaker is not working well. What do you suggest?
For model number KTRC22KKSS00
Hello Stephen,
Thanks for your question. The icemaker itself could be faulty, but you may also want to test the bi-metal defrost thermostat and the defrost heater with a multimeter to ensure continuity. Replace them if they do not show continuity. If it has been 6 months since you last changed your water filter, consider replacing that as well.
I hope this helps.
Does this appliance come with the ice maker attachment or no?
For model number GB9SHDXPQ02
Hello Jason, thank you for your question. This appliance was produced with an icemaker, and should come with one installed already. The icemaker replacement for that model number is PartSelect Number: PS2121513. Please enter the part number into the site for current price and availability. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Stacy
April 8, 2018
My fridge is dripping water from the ceiling. It is not random condendation droplets, but is coming from a whole on the ceiling.At a rather brisk rate. ( 1/4 cup in 10 minutes.) i have a jar collecting it so it doesn't flood!. i dont have an icemaker or hoses connected. the door and freezer seal are intact. any ideas?
For model number ET1MHKXMQ03
Hello Stacy, thank you for your question. It sounds like the drain tube for draining the excess water is clogged. I would recommend removing the back panel of the freezer to see if there is ice buildup on the evaporator coils. If there is ice buildup, when the defrost heater turns on, it will defrost a lot of water that will drip down. Then check the drain tube at the back of the freezer section to be sure it is clear. It should be draining water from the freezer down to the evaporator pan under the fridge by the compressor. If you pour some water down the drain and it doesn't go through to the pan, the tube is clogged or frozen and will have to be cleared. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
September 17, 2021
Water line compression fitting on fridge broke. Can't find part number anywhere to order new. How do i find?
For model number wrs315snhmo3
Hello Mike, thank you for writing. We have a compression fitting for you. It is PartSelect Number PS11742367 1/4" to 5/16" .We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
September 29, 2021
I recently bought a new refrigerator (WRS315SNHM) with the add-on ice maker (ECKMF95). The ice maker does not work and have been told I have the wrong ice maker.
I was told the correct ice make should be WPW10715708. Now I have been told the two ice makers are the same. I need clarification as the simple idea of making ice is getting expensive.
For model number ECKMF95
Hello Mike, thank you for your question. Part number WPW10715708 and part number ECKMF95 are the same part. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Garrett
May 7, 2018
I am replacing my ice maker. What ice maker (part number) will work with my Whirlpool fridge?
For model number ET1LFKXKS06
Hi Garret,
Thank you for your question. The part number listed under your model number for the ice maker is PS11757272. I hope this helps. Thank you and have a great day!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wanted to install ice maker in my freezer
I was clening my uprght freezer and noticed that it was preped for an icemaker. I first went to the Whilpool website and could not find my part as my freezer was a 2008 model.
I saw PartSelect on the search page and went to thier site. I put in my modle number of the Whilpool Ice maker kit that was on the back of my freezer. PartSelect had the part in stock and approx $18.00 less than the other kits listed on the Whilpool site (that did not match my kit number). I orderd the kit on Sunday and it arrived on Wednesday. It took less than and hour to install. Every part I needed was included. The following day I installed the water line and now I have an extra icemaker.
Donald A. from ORLANDO, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
72 of 97 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
REplaced ice maker
Replacement was very easy as new ice maker was identical to the old one. Took about 10 minutes.
M from Lafayette, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
28 of 40 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The icemaker in the fridge stopped working
The repair was so simple. I removed the old icemaker in about 3 minutes and unpacked and installed the new one is about 10 minutes. It was literally a matter of removing a few screws! Eady to follow instructions!
Rebecca from Dayton, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
17 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
installed ice maker
From the time I started to finish I worked 3 hours, this included installing the new ice maker, cutting into the cold water line in the basement and installing a t with a 6inch piece of pipe with a compression valve to connect to the small cooper tube, this is worth your time to do it this way, its a lot better connection than the small pierce valves that come with the kit, they will leak over time. I installed the filter in the waterline in the basement for easy access
Dennis from Spring Valley, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
13 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
OLDER Ice Maker on the fritz
Grat help on the phone. We saw repair on YouTube. my wife and I worked it together. It was child's play!! It went beautifully. we were able to "chill out" with ice aplenty!!Thanks...eric
Eric S from Boca Raton, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Wrench set
6 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I added an ice maker to a 20 year old refridgerator
I added an icemaker kit. Everything I needed was in the kit. The refrigerator was presetup for an icemaker it was just never added. The only problem I had was that the holes for attaching the water solenoid were not pre drilled so I had to drill them myself and use sheet metal screws. The icemaker is working great.
Nicholas from WEST CHESTER, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
install ice maker with all parts for refridgerator with no ice cube hardware on it.
My husband is an appliance man and he did the work.
Ann from MC CUNE, KS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It was my first time to install a ice maker.
I first read the instruction manual then I watched the installation video. My water line to it was 3/8. Went to the local ACE Hardware to purchase a short peace of 1/4 copper tubing and the fittings to connect them together. It makes ice every 55 minutes.
Gary from MACOMB, OK
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carl H - February 18, 2022
Verified Purchase
Part works well
Part was exactly like the old one making installation easy
★★★★★
★★★★★
George C - July 7, 2021
Verified Purchase
Ray repair.
Online instructions very helpful.
★★★★★
★★★★★
John M - July 7, 2021
Verified Purchase
Even I could do it
Instructions were good even used video support. Seems like a solid ice maker and has been working flawlessly. Solid product with good customer support
★★★★★
★★★★★
Robert S - June 27, 2021
Verified Purchase
Easy to install
The kit came with all necessary parts and good instructions. I particularly like the installation video.
★★★★★
★★★★★
Dave B - February 18, 2021
Verified Purchase
Add on ice maker
Everything fit and bolted right up. Thanks
★★★★★
★★★★★
Michael M - February 11, 2021
Verified Purchase
Great part
The part was just right and easy to install
★★★★★
★★★★★
Cheryl W - November 22, 2020
Verified Purchase
All as expected
No issues with the ice maker. Three screws and turned the water back on. Had ice in hours. Just wish those top screws were a bit easier to access. (Old ice maker was flaking off the black coating, getting louder with popping noises over the past couple of years, then recently it just quit working.). Replacing the ice maker is a lot cheaper than buying a new fridge.
★★★★★
★★★★★
Sandra M - November 12, 2020
Verified Purchase
Part worked great
We ordered an icemaker it came quickly and was easy to install. The only problem was our fault and that was having to go to the hardware store twice for new water supply hose and plastic things for seals. Will order from PartSelect next time we need a part. Thank you for great service.
★★★★★
★★★★★
Christopher F - September 21, 2020
Verified Purchase
Everything worked as expected and the directions were clear
We have lived in our home for 17 years without an ice maker. Turns out, one of the previous owners had one in another fridge so the water line was already there as well as a water purifier. How about that? Our lives are so much better with this ice maker. Also, the cubes are skinny enough to fit in our Swell bottles.
★★★★★
★★★★★
Lance S - April 23, 2020
Verified Purchase
Icemaker Installion a snap
Installed an Ice Maker. The parts arrived quickly. In perfect condition. U-Tube video made this first-time installation a snap. Any future projects that PartSelect carry's parts for, will be my go-to place.
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
