Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This dryer timer is a key component in managing the electrical functions and duration of drying cycles. Operating at 115V and 60Hz, it ensures precise timing for efficient performance across a range of compatible dryer models. Designed for reliability, this replacement part helps restore accurate cycle control, contributing to consistent drying results. Installation may require basic tools and should be done with the appliance unplugged for safety.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Melinda G - December 13, 2019
Verified Purchase
Easy Repair
Everything is back up and running.
★★★★★
★★★★★
Brian C - May 17, 2018
Verified Purchase
Exact replacement part
The timer fixed an issue I was having with the time dry not working, but also the sensor dry. In looking at this product, the timer was not listed as a solution to my problem, but I’d already changed the heat sensor and the timer seemed like the next probable culprit. The timer was extremely easy to replace and was an exact number match to the timer in the dryer. If you need to replace a timer, look at the numbers on the current timer and get an exact match. My wife ordered another timer that the internet said would work with our dryer and it wasn’t anywhere close to the right part. In short, this timer is easy to install, fixed my issues, and works perfectly!
★★★★★
★★★★★
Larry A - May 29, 2020
Verified Purchase
Timer
Correct part & arrived on time. Easy to repair.
★★★★★
★★★★★
Curtis E - January 22, 2020
Verified Purchase
Easy fix
Hard to remove clips but not impossible. Took approx 15-20 minutes total.
★★★★★
★★★★★
Craig N - January 25, 2020
Verified Purchase
Timer Replacement
Part was exactly as advertised and fairly easy to replace.
★★★★★
★★★★★
Roberto J - April 26, 2023
Verified Purchase
Easy installation
Took me about 10-15 to install the timer and didn’t have any clue but the videos online help me.
★★★★★
★★★★★
Diane C - May 25, 2019
Verified Purchase
Maytag bravos dryer timer
Maytag part was exactly what I needed to repair my dryer. Replacement was very easy and dryer is back in working order.
★★★★★
★★★★★
Peter O - January 10, 2019
Verified Purchase
Easy to install. Works and dryer running fine. Saved a couple of hundred dollars. GE charges $100.00 to walk in the door plus labor and parts charge.
Packed very well for transit. Part has expected. Dryer running correctly. Happy customer.
★★★★★
★★★★★
Michael S - March 23, 2019
Verified Purchase
In stock, seamless, painless!
Timer was a perfect match. Easy, wire clip to wire clip replacement took 15 - 20 minutes overall. Toughest part was due to not having the proper tool to compress the manufacturer’s clips that hold the timer in place. Had to finesse with a screwdriver, slow but successful. Dryer has had heavy use for a week now, like brand new. BTW, my first stop on-line had part back ordered. In stock at Partselect, had it in 3 days!
★★★★★
★★★★★
Teri K - February 3, 2023
Verified Purchase
Easy repair, part was quality made and fixed the problem.
Dryer is working as it should be.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The mounting plate was not right
I put old frame plate on new part looked same, Then I plugged machine in and turned on, Immediatley burned contacts on new unit, customer was agitated with wait, went and bought a new dryer and I was out 135.22 for part, I didn't charge for labor or part because I did not complete repair!!!!!
joe from SNELLVILLE, GA
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer was not working,
Repair was fairly simple, unplug power from dryer, take back top panel off, remove timer knob, remover timer switch, un-plug one lead at a time, and place on new timer, reconnect timer, put back on back panel, reconnect power to dryer, and that it.
Serena from ESSIE, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unable reach the bottom clip of the timer. You need to remove the console from the dryer base. dryer bace.
Unplug dryer !! Remove 5 screws on the back of the console. Remove lint screen & 2 screws Remove timer dial .Place wood wedge under the top of the dryer. Force wedges into the space between the top & bottom of dryer. Lift top .There are two clips that hold the console to the
... Read more top. This gives you access to the top & bottom clips that hole t he timer to the console. Remove timer &replace.
Read less
Donald from LUDINGTON, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The TIMER on the dryer quit functioning. It heated, but would not move or turn off.
Removing the old timer was the hard part. When pulling off one of the wires it broke off from the female connector inside the plastic piece. I had to go the store to find another very small female connector that would work inside the plastic. After stripping the very small stranded wire, crimping it to the new connector I finally could
... Read more insert it inside the replacement timer. Upon completion, nothing had changed. Still have heat but the timer does not move. An electrician friend says the dryer probably has a 110 wire coming off the 220 to supply the power to the timer. I haven't taken it apart yet to try and find the problem.
Read less
William from KANSAS CITY, MO
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer failed.
Removed 5 screws holding the back plate in place and removed the 5 different connections to the timer. I had a fair amount of difficulty "releasing" the old timer from its two clips that held the timer in place. I really needed a special pair of pliers that I could grip the pressure clips. Sad to say that in the process of releasing the b
... Read moreottom clip I broke of the clip. It turned out that I didn't need the lower clip to securely hold the new timer in place. There was substantial pressure against the timer given by the cable connections that the timer held in place. Replaced the back plate.
Read less
John from ANACONDA, MT
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not shut off.
Very easy replacement of timer fixed the problem.
randy from KLAMATH FALLS, OR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
July 30, 2019
Is this the correct timer for the Maytag dryer medx655dw1
For model number MEDX655DW1 - Maytag Dryer
Hello Tom, thank you for inquiring. Yes, this is the correct replacement Timer for your model. Good luck with your repair!
17 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
March 6, 2020
Timer knob broke at base leaving it unable to just replace knob. Does the timer come with knob?
For model number MEDX655DW1
Hi Chris,
Thank you for your question. The timer, part number PS11756913, does not come with the knob. The knob is sold separately. The part number listed under your model number for the knob is PS11756281. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.
Dryer timer doesnot advance. Timer motor measures open on 2k range
For model number Maytag MEDX655DW1
Hi Steve,
Thank you for your inquiry. You may have to replace the motor. There are some parts that you will need to check to see which one is causing the issue. You will also need to check the cycling and high limit thermostats as well. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Anthony
November 22, 2019
The timer is not working.
For model number MEDX655DW1
Hi Anthony,
Thank you for your question. If the timer is not working, it may need to be replaced. There are some parts that you should check as well to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=MEDX655DW1&mfgModelNum=&fkMfgID=1&ModelMasterID=866624&PID=32. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ronald
September 5, 2023
Timer set, clothes dryer does not stop, have to shut off manually. Do I need to replace the timer? Which one?
For model number MGDX855DW2
Hello Ronald, thank you for reaching out. The timer controls the duration of the drying cycle in a dryer. If the contacts or gears inside the timer are faulty or damaged, you may not be able to control the timer functions. We recommend replacing the timer, part number PS11756913. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
June 30, 2021
The dryer will not shut off in either sensor or timed setting. Also we cannot change the temp setting, always hot, basically it just keeps running on high temp.
For model number MEDX655DW1
Hi John,
Thank you for your question. If your dryer shuts off too soon, there are some parts that you will need to check to see which one is causing the issue. You will need to check heating element, the thermal cut-off kit, the timer, the high limit thermostat, the door switch and the drive motor with pulley. We hope this helps! Good luck with the repair!
Hello Mary, Thank you for the question. If the Element, Thermal Cut Off Kit parts and the
Internal-Bias Thermostat were all tested and are good, you may need to replace the Timer. We hope this helps!
I replace the high limit switch termal fuse heating element has continuity But for some reason it starts to heat for a little bit then it keeps blowing the high thermal switch and the thermal fuse
For model number MEDC465HMO
Hi Steven, thank you for getting in touch. We suggest cleaning the exhaust vent and ensuring it is not blocked. If this does not help, the issue could be with the heating element, part number PS334313. If you require assistance placing an order, please contact customer service. We hope that helps!
