This is the replacement adjuster housing for your dishwasher. It is made of gray plastic and is approximately 4X4 inches. The adjuster housing clips into the dish rack and allows you to adjust the height of the rack. Because it is made of plastic, the housing can occasionally break. When this happens you may notice that one side of your dish rack is lower than the other. If the housing is damaged, you will not be able to properly adjust the dish rack height. This is an authentic OEM part sourced directly from the manufacturer and is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Jenn-Air, Whirlpool, Maytag.
Part# WPW10588164 replaces these:
W10320664, W10418315, W10588164, WPW10320664
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
TERRY G - May 2, 2018
Verified Purchase
easy repair
part received in good time and was the right one
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
plastic parts degraded and failed
I pulled the rack and removed failed parts, then reassembled. I would note that the videos are helpful as dishwasher racks can be a bit of a puzzle.
Why manufacturers use so much plastic in a heated environment is beyond me. The heat cycle degrades the plastic to failure - poor design!
My upper rack, even after replacing the upper rack tracks, would pivots forward or backward out of the horizontal.
It was easy to remove the old parts by using a screwdriver to push in “tabs” that kept retainer clips in place. Once removed, it was a matter of easy assembly in reverse and then re-clip. It became clear that the problem was because a few tabs that click into the sliding track and worn to the point where they no longer retained a tight co
... Read morennection to the track causing the upper rack to tilt with weight to front or back. Sure, the parts are a bit pricey but not when compared to a repair visit or a new KitchenAid which otherwise was functioning perfectly.
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
January 30, 2019
Will the same part work on both sides of the rack, or is there a right-hand and left hand piece?
For model number kdte104ess1
Hello Joe, thank you for your question. The left side is Part Number: PS11756592 and the right side housing is Part Number: PS11756593. Please enter the part number into the site for current price and availability. Good luck with your repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Shari
September 24, 2019
PartSelect number PS11756592. Does this include the lever to adjust the rack or is this the wrong part? KitchenAid KDTE254ESS0.
For model number KDTE254ESS0
Hi Shari,
Thank you for your question. Yes, the lever is included with the part. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Duane
March 3, 2020
My rack wont stay up on the right side. Is this the part # i need? Ps11756593
For model number KDTE204ESS3
Hello Duane, thank you for your question. If the upper rack is not staying up on the right side the adjuster Part #: PS11756150 and housing should be replaced which is Part #: PS11756593 and Part #: PS11751101 housing cover. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Phil
July 4, 2019
Does this part contain internal components? Or just the housing? Only one small clip from inside is broken on mine.
For model number PS11756592
Hello Phil, thank you for your question. This is just one piece of the adjuster housing. It does not have any internal components.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
