Upper basket height adjuster wheel assembly broke due to plastic fatigue
I used the link provided by Part Select. I have arthritis in my hands and the old part had to be broken with a pliers to remove it from the basket. Once I had the old part off, it was easy to slip on the new adjuster and complete the repair.
Grace from WILLIAMSBURG, VA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel missing left front of upper rack
Watched video at parts select to remove front, stops, then for wheel assembly after fumbling with wheel assembly to figure where to put pressure on wheel assembly release catch .......reverse assemble..... Finish. Relax and ponder how parts are designed to fail then easily replace- saving maint and service charges. Had machine 5 ye
... Read morears and replace a different failed part once a year so far . Seems a fairly good system as long as parts available.
Watch a few YouTube videos, they show very simple tricks to unlock the plastic parts before your installation
Jeffrey from SKOKIE, IL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ROLLER FELL APART
SNAPPED IT IN REPLACED ALL
MARY from LELAND, MS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bryan
July 5, 2021
Is this a set of 4 or just a single?
For model number MDB4949SDM0
Hello Bryan, Thank you for the question. The Dishrack Adjuster and Wheel Assembly is sold individually. We hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Dennis And Barbara
December 15, 2021
i need help putting the wheel on the rack, is there a video to watch?
For model number part number wpw10571738
Hi Dennis and Barbara,
Thank you for your question. Here is a link to one of our YouTube videos that you may reference on how to install the wheel assembly. The dishwasher and the wheel assembly in the video may appear different from yours, but it will give you a general idea on how to install the part. We hope this helps! Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ignacio
December 5, 2022
Could you confirm the length of the part? Thank you
Hi Ignacio, thank you for reaching out. The length of this part is approximately 7.5 inches. We hope this information is useful.
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
March 31, 2024
how to get the track stop on front of upper rack out to remove old roller and place new roller in
For model number MDB4949SHZ0
Hello James, thank you for the question. We have attached the relevant video link that will help you in removing the rack track stop. Glad to be of assistance!
