
Temperature Sensor
$
78.62
In Stock



Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS11756166
Manufacturer Part Number WPW10548509
Manufactured by
Whirlpool
You May Also Need?
Product Description
Temperature Sensor Specifications
This is a temperature sensor. It may also be known as an ice maker sensor and is used in conjunction with your ice machine. This piece is roughly 3.5 inches long, almost 2.5 inches wide, and includes the necessary wiring connector. You will find this part located in the water pump area of the ice cube maker. The function of this part is to determine the water level within the water reservoir. Once the water level reaches a certain point, the sensor will signal the controls to fill the reservoir.

How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Ice Maker.
This part works with the following products:
KitchenAid, Whirlpool, Kenmore, Jenn-Air.
Part# WPW10548509 replaces these:
AP6022829, 2313643, W10548509
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bryan
December 29, 2017
How do you remove this part? It does not simply lift out.
For model number KUIS15NRTB2

Hello Bryan,
Thanks for your question. This part is located in the water pump area of the ice cube maker. You will need a 1/4" nut driver to remove it, and you may need to remove the metal bracket holding in the wire harness.
I hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Phillip
February 12, 2018
If this can be tested how would you do it?
For model number GI15NDXXQ1

Hi Phillip,
Thank you for your question. The sensor can be tested with an multimeter. Before testing the sensor with a multimeter, let it warm up to room temperature. It should read 6.2K Ohms at room temperature. If the readings are far off from what you are getting, then the sensor needs to be replaced. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
April 2, 2018
You said to read 6.2k ohms, i am reading 10.2k ohms. Is this 10.2k ohms an indication of a faulty sensor. Thanks
For model number W10548509

Hello Thomas, thank you for your question. It should read 6.2K Ohms at room temperature. If the readings are far off from what you are getting, then the sensor needs to be replaced. Since your reading is 10.2k Ohms, I would say the sensor is faulty and needs to be replaced. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim R. Reid
February 26, 2019
Solinoid won’t shut off. Runs continually. Overfills resivoir. Drain pumps kicks on and drains excess water. Cycle repeats continuously without shutting off. Unit is fairly dirty from mineral build-up. Thank you for taking time for help.
For model number 106.89589702.

Hello Jim, Thank you for contacting us. I suggest checking the following part: PS1484571 Water Pump Assembly. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you.
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 2.7 / 5.0, 3 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker would not make ice. I went through diagnostics and it showed the level sensor was not working. Water would continue filling the reservoir and not shut off to start making ice.
Took off several plastic covers to gain better accessibility to the sensor. Had to pull out the whole support piece to get at the part. Took out the old sensor, cleaned the unit as best as possible, then installed the replacement. Turned on the power to the unit and reinstalled all the parts I took out for better viewing and accessibility. Started up the unit and it is slowly building ice, which I will remove and dispose of to start getting clean ice.
-
William from LANDRUM, SC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sensor quit working
Removed and replaced sensor
-
Floyd from VIAN, OK
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the circulation pumps was going bad and making a loud noise.
I replaced the two pumps, since both were the same design...figuring if one went bad then the other would soon go bad...and then I also replace the water level sensor. All had quick connect plugs. The time is just taking apart the various pieces, cleaning, installing the new pumps and sensor, then reassembling.
Other Parts Used:
-
Ken from Huntsville, AL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Duane T - July 29, 2022

It was what I needed.
The part was exactly what I needed. Thanks guys!
Floyd A - November 5, 2021

Undercounter ice maker
The part was perfect. Just like old part and works great
Richard S - September 28, 2021

Water Senor for Ice Maker
Received the part on time. Installed it and after a few days thought it was not working. Returned the sensor. My error the part worked correctly. It turned out to be a different issue. Customer Service was very responsive and I would use PartSelect as a recommended vendor again.
Timothy F - September 15, 2018

Fast shipping
The exact right part. Easy install, works perfect.
Richard B - April 12, 2018

Exact replacement worked great
The Ice Maker is working like a charm ...Thanks
Bennett S - February 12, 2018

Great part- works great now!!
The part came in great condition.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11756166
Manufacturer Part Number: WPW10548509
Manufacturer Part Number: WPW10548509
Brand
Model Number
Description
Kenmore
10689583704
Ice Maker
- Kenmore Ice Machine Model 106.89583704 (10689583704, 106 89583704) Parts
Kenmore
10689589705
Ice Maker
- Kenmore Ice Machine Model 106.89589705 (10689589705, 106 89589705) Parts
