We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
April 15, 2019
Front track stop keeps constantly falling off. Everything falls off the track.This is a new washer. Please how do i attach it to make it stay?.
For model number WDTA50SAHZ0
Hello Mary, Thank you for your inquiry. Line the two tabs on the back up with the two cut outs on the end of the track, then press down on the lever in the center on the side with the lines, then push the clip in the rest of the way. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
John
April 27, 2018
Does this kit have both the left and right side rack stops, or just one?
Hi John, Thank you for the question. This is just the individual front track stop. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Diane
February 2, 2018
How do i reattach the front rack stop?
For model number KUDE20FBWH1
Hello Diane, Thank you for your inquiry. Line the two tabs on the back up with the two cut outs on the end of the track, then press down on the lever in the center on the side with the lines, then push the clip in the rest of the way. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jerry
January 26, 2020
How do i install the stops at the end of the basket rails?
For model number WDT730PAHZ
Hello and thank you for writing.
Line the two tabs (that are on the back of the stops) up with the two cutouts on the end of the track, then press down on the lever in the center on the side with the lines, and push the clip in the rest of the way. We hope this helps. Please contact us anytime if you require further assistance.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
March 16, 2023
I had to replace upper rack wheel assembly but now trying to figure out how to put the rack stops back on. How can one tell which one is for right side or left side?
For model number WDTA50SAHZ0
Hello Mike, thank you for getting in touch. To put the rack stops back on, follow the guide in the attached link. We hope this sorts out your problem!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Daniel
April 8, 2023
How does the front rack track stop help the upper rack spray water?
For model number WDT780SAEM1
Hello Daniel, thank you for the question. The front rack track stop is used to stop the rack when you pull the rack out to put dishes in it. It does not help to spray water. The upper rack is sprayed by the upper spray arm. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 10 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lost stop from one side of top rack. Rack could be pulled off track.
Looked at other side of top rack which still had the stop. Just had to orient the direction of the stop and push it firmly onto the rack arm. Took a couple tries, but it went in and locked. Works perfectly. Inexpensive and easy fix to to very annoying problem.
Sheila from FAYETTEVILLE, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
8 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part snap broken
Snap in the missing track stop and twist snap the middle spray arm. That simple.
I had to replace the whole sliding system on the top rack. Plus the clips holding it. It snapped. I watched the video and did the steps from Steve. The rack slides better than when brand new. Whirlpool wouldn’t pick up phone but part select did. So thank you for being there so I could fix the rack and be able to use the dishwasher again.
Dawn from MELBOURNE BCH, FL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front Track stop missing
Snap new track stop into place. Took a few minutes to figure out top/bottom and inside/outside, but no issues
Tim from GLADSTONE, MO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I needed to add a clip stop to the right front track.
I manually attached the track stop to the right track in the disheasher.
Diane from LAKE GEORGE, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper dishrack pull out wheels broke away from the arms.
Listened to the video from Parts Select which was on the part number where it was ordered from. It was a very well done video.
front track stop broke on both sides of the upper tray
Very simple to repair The front track stops just slide into place, easy. When I looked for these parts this place was the least expensive and the quickest delivery I have ever had. Quick, efficient and friendly online staffing. Thank you, Deb
Deb from LAWTON, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheels on slider came off
replaced the whole bracket assembly very easy to do.
Came as a box of loose parts with no directions. New parts looked totally different from OEM parts (better than OEM) on the rack. Luckily I went to the Partselect web site and they had a great short video preforming the task. Was a 15 minute job after the video.. If you get the Upper Rack Adjuster Kit with the wheels watch the short video and it’s a breeze!!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
