This hose attaches to water pump assembly.
NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.
I romoved the front of the washer access panel. I then used the pliers to remove the clamps from the old hose and to replaceit with the new one.
Edward from Clinton, MD
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
16 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer leaking
Opened the front panel with 3 crews T-25 or socket wrench. Panel comes off right away.
Look for the leak. Determined it was the hose. Use power pliers to remove the clamp.
The small clamp was easy. The big one I had to use my yoga to get to it. It probably would had been easy from the back panel but moving the machi
... Read morene requires brute force.
Once the hose was out I found some bra under wires which is what probably punctured the hose.
Removed the front filter and found a bunch of nails.
Assembly was much easier and placed clamps so that if needed it would be a lot easier to remove and replace.
Read less
Alexander from Miami, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
39 of 44 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brant
December 28, 2019
Machine is leaking from above the counter weight
Hi Brant, We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cindy
January 2, 2020
I've been seeing a good amount of small pieces in the drained water in my sink. Clothes are clean. Is it the peeling from the aged rubber of this part? I changed the drain pump in the past summer.
For model number GHW9100LQ1
Hello Cindy, Thank you for the question. If pieces of the hose are wearing off and coming out in the water, the house will need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ross
September 5, 2019
Wringer does not work. Machine in great condition. A small hose from the wringer column drive area. Is this for s safety? Does not having the ball on the end prevent tolls turning. Top drive is not turning
For model number E2L
Good Day Ross. Thank you for your question in regards to your unit. Unfortunately the model number that you provided us (E2L) is either incorrect or incorrect as we were not able to find any specific information. Could you please provide us with the full model number so we can research into finding the right compatible parts that you may need? If you are having difficulty locating your model number we would recommend reaching out to the manufacturer as they should be able to assist you finding it. Best Regards.
Was this helpful?
Thank you for voting!
Cindy
January 2, 2020
Continued from my previous question. Is it the pump hose I need to replace?
For model number GHW9100LQ1
Hi Cindy,
Thank you for your question. To verify if the particles you are seeing are coming from the pump hose, you will need to inspect the hose for signs of damage and wear. If it shows any of these signs, it will need to be replaced. Check the drain pump as well to make sure that the part is in good condition. If the pump is damaged and has pieces breaking off from it, it will need to be replaced. We hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Michael
June 8, 2023
Current pump hose has a light spring-loaded ball in a rubber housing that is contained within the pump hose. Is this the Eco ball?
For model number 110.45091400
Hi Michael, thank you for contacting us. The ball that you have mentioned is the tub-to-pump check ball, part number PS1491714, that prevents water from flowing in the wrong direction. We hope this information is useful!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/Washer-Hoses-and-Tubes.htm"},{"position":3,"name":"WPW10467168","title":"WPW10467168","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
