Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lodewijk K - November 13, 2018
Verified Purchase
easy replacement
old panel flashing light incicated the buttons stuck on
replace panel 8 screws & all works well
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Changed panel & control panel to stainless steel
I removed the nuts that held the panel, put the new one on replaced the same nuts. For control panel I unscrewed the two nuts that held it into place, carefully lifting the plug from the panel and replaced the new one, by putting the plug back in place and attaching the two nuts. Finished! Easy!
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marilyn
September 24, 2017
My normal light on the dishwasher keeps blinking and will not start. Do i need to replace the control panel or is there some other fix that i can try?
For model number DU1145XTPQ7
Hi Marilyn,
Thank you for your question. Usually behind the kickplate of your appliance, you should actually have a tech sheet attached to the back side. That tech sheet will have a diagnostic step by step procedure that you can use on your appliance to test the electronic control board. That may help you to determine which part is actually giving you the issue. There are a couple of parts that could cause the issue though. You could test your heating element with a multimeter to see if it has burnt out or not. The other two parts would be your control board and control panel. The diagnostic test should be able to tell you whether it is the control board or control panel that is the problem. hope that helps. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
A
June 26, 2019
The pots and pans & normal light are blinking and the dishwasher will not start. Those two lights just remain blinking. What do you suggest?
For model number DU1055XTVS0
Hello A, thank you for your question. Try a hard reset on the dishwasher. To reset it, you will have to have the door open. It can not be latched. Press "Heated Dry," "Normal," "Heated Dry," "Normal" within three seconds of the first pressed button. Now close the door, this should reset your dishwasher. If this doesn't work, you will want to try unplugging the unit or turning the power off to the unit then turning the power on to see if that resets it. If that doesn't work, you will want to start by testing the heating element, bi metal fuse, door switch, capacitor, turbidity sensor, and high limit thermostat. I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Joanne
December 7, 2018
No lights on panel on door come on---when i hit cycle for pots and pans i get a grinding sound and the cancel light comes on but when i touch the other cycles nothing happens.When i hit the option soak and scour i get the same grinding noise and the cancel light comes on. no other lights come on and no other button works on the panel but the cancel.
can you tell me what could be causing this and what part i need.
thank you,
For model number DU1055XTVS0
Hello Joanne, Thank you for the question. I suggest checking the Chopper Assembly, PartSelect Number PS11745442 and the drain pump, PartSelect Number PS11753379. It sounds like something may have been damaged or has become jammed and not allowing the cycle to start. Hope this helps, good luck with this repair!
The normal light flashing , but when we hit the reset button on the wall it wi start after we hit it
Hello Gloria, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dishwasher","title":"Dishwasher","url":"/Dishwasher-Parts.htm"},{"position":2,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Dishwasher-Circuit-Boards-and-Touch-Pads.htm"},{"position":3,"name":"WPW10459139","title":"WPW10459139","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
