Sump WPW10455268

Hi LeeAnn, Thank you for the question. The only way to know for sure where the leak is coming from is to take the appliance apart and check for damage in the seals and parts int he bottom of the appliance.The most common fix for the leak in the bottom of the dishwasher is the small gasket in the middle of the sump (Part Number: PS11755006) that seals the shaft of the motor/diverter valve to the sump.Hope this helps!

Hi Ed, Thank you for the question. The seal is only sold as part of the sump. In order to replace the seal the sump will need to be replaced. Hope this helps!

Hi Gerald, Thank you for your question. If the dishwasher is leaking on it own when it is off, the problem may be with the water inlet valve. A component in the valve may not be working correctly and it could cause water to leak into the dishwasher and then leak out the bottom. You will need to test the water inlet valve with a multimeter to see if it is working correctly. The water inlet valve on your dishwasher is normally located to the left side behind the lower access panel. Remove the screws that secure the access panel and locate the valve. Inspect the inlet supply connection to the valve for leaks and tighten if required or replace the connector if damaged. Most modern dishwashers use compression style fittings or hoses that can be replaced easily. Remember to turn off the water supply before attempting this repair. Check the body of the valve and the outlet hose for cracks or damage. If there is evidence of a leak in the inlet valve area but it is not present during your inspection, try starting a cycle and observe the valve area while the dishwasher is filling. Use caution when attempting this repair as there will be live voltage in this area and any repair or parts replacement should only be attempted after power has been removed. If your dishwasher is leaking because it has overflowed, the water inlet valve may be the cause. A mechanical defect inside of the valve could cause it to stay open even after the float switch has been satisfied. If your dishwasher continues to fill above the heating element, try opening the door latch to see if it stops filling. If it continues to fill, then you have a defective inlet valve that will need to be replaced. I hope this helps. Thank you and have a great day!

Hello Rosanna, thank you for inquiring. For this symptom you will want to replace either the Drain Hose part PS2358130, the Sump part PS11755006, or the Drain Pump part PS11756031. We hope this helps.

Hi Paul, as of writing you can purchase the pump and motor assembly part WPW10671942 for 345.51 cad before taxes and shipping. I am not sure of the price of a new dishwasher as we do not sell the entire model just the parts. Thank you for your question and good luck with your repair!

Hello Dianne, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Hello Chris, thank you for reaching out. The seal you need is the part of the sump, part number PS11755006. The seals are not sold separately and you would need to replace the full sump. We hope this information helps!

Hello David, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the disposal. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Hi Fredric, Thank you for your question. If the dishwasher is still leaking in the area where the shaft protrudes up through the sump, the diverter seal is likely worn and it will need to be replaced. The seal is not sold separately and is only sold with the sump. The part number listed under your model number for the sump is PS11755006. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Hello Dianne, Thank you for your question. We only sell the detergent dispenser as a complete assembly under part W10861000 for your model. You would need to replace the entire assembly for your model to replace the cap. Hope this helps!