Part Location Diagram of WPW10443885 Whirlpool LOCK, DOOR
See part 6 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

LOCK, DOOR WPW10443885

★★★★★
★★★★★
9 Reviews

Rated by 3 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 100.60
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11754810
Manufacturer Part Number WPW10443885
Manufactured by Whirlpool
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close | Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Amana, Crosley.
Part# WPW10443885 replaces these:
AP6021486, W10443885, WPW10443885VP
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rebecca
December 12, 2018
The error code e3 f5 flashes - clicking noise when you close the door and won't wash. Sometimes it does wash then the clicking noise occurs again and won't open. I am pretty sure it is the door lock. But, i would like for you to verify this for me before i order the part. Thank you.
For model number WFW7590FW0
PartSelect logo
Hello Rebecca, thank you for your question. Yes, the error code e3 f5 is in reference to the door lock malfunctioning. We would recommend replacing the door lock part number Part Number: PS11754810. Good luck with your repair!

12 people found this helpful.

Was this helpful?
Thank you for voting!
Rose
September 30, 2019
Washing machine won’t start or gets stuck in washing mode. Error codes f5 e3. Please confirm part number for repair of the door lock.Thanks.
For model number WFW75HEFW0
PartSelect logo
Hello Rose, Thank you for the question. The error code F5 E3 in display indicates that the door is not locking properly. If the door is level and closing properly, the door Lock PartSelect Number PS11754810 will need to be replaced. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Lanita
December 18, 2018
My washer show f5 e2. Is this the part i need to repair it?
For model number WFW72HEDWO
PartSelect logo
Hi Lanita, Thank you for your question. The F5 E2 error code is letting you know that your washer cannot engage the lid lock because there may be an obstruction. You will need to remove any objects that are preventing the lock from engaging. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ray
24 days ago
It this the piece that goes on the washer that the door locks into?
PartSelect logo
Hi Ray, thank you for the question. Yes, this is the part that keeps the door of the washer locked. We hope this is what you were looking for!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Tony
January 3, 2020
Hello, after I turn on and set the temp and spin and the door is closed i press run. The door will lock audibly and the light comes on showing that it is locked but it will not run. The door is physically locked and there are no error codes. I have tried adjusting the knob in case it was between settings. I have tried multiple times of opening the door,making adjustments,turning the power on and off but every time it locks the door and then nothing. The water is on and the hoses do not have kinks in them. They have not been touched. The machine is 22 months old and used by a single person so it is not used a lot. I could use some help. Thanks, Tony.
For model number NFW5800DW0
PartSelect logo
Hi Tony, I recommend reading our article here: https://www.partselect.com/Repair/Washer/Lid-Door-Will-Not-Open/. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
ANA
March 29, 2019
Hello!!! i have the washer with the model above. According to my Brother, i have to buy the whole control panel. the washer will not start and the door gets lock when i have closed it...it will not open after i have closed the door. also, the washer some way some how cuts my clothes while is washing the load of cloth. i need an expert to guide me what to buy.
For model number 7MWFW81HEDW0
PartSelect logo
Hi Ana, Thank you for your question. If the washer is not starting, there are some parts that you will need to check to see which one is causing the issue. You will need to check the temperature sensor and the noise filter. If your clothes are tearing in the washer, you may be overfilling it. If you try to force too many clothes into the washing machine, this increases the risk of a tear, snag or some other form of damage. The excessive load changes the weight of the washing machine and some of the clothes may snag inside. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Juan
October 1, 2019
Washer will not start no led readout sometimes i can play with button and it’ll show but it goes away
For model number W10443885
PartSelect logo
Hello Juan, thank you for writing. This sounds like a faulty Main Control Board, but we will need the model number for your washer to locate the correct replacement for it. We look forward to hearing back from you!

Was this helpful?
Thank you for voting!
Dan
March 10, 2020
The door will not stay shut the part i need is on the door goes into the latches what part is that is that number six
For model number WFW75HEFW0
PartSelect logo
Hi Dan, thank you for your question. The part that goes into your door latch is called the strike, that would be this part: PS11755543. Good luck with your repair.

Was this helpful?
Thank you for voting!
Related Parts:
Glenn
December 9, 2021
HAS ERROR F9 E1
For model number WFW72HEDW0
PartSelect logo
Hello Glenn, thank you for writing. If F9 E1 (drain pump system problem - long drain) appears in display, the washer is taking too long to drain water. The drain may extend more than 4.5" (114 mm) into standpipe. Check plumbing for correct drain hose installation. We hope this helps.

Was this helpful?
Thank you for voting!
  • 1
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 3 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Error code: F5E3 - front loader door won't open
Maytag Washer MHW5100DW

Symptom: front loader door won't open

Error code at the beginning of a wash cycle: F5 E3 means your door latch isn't working properly which is why the door won't open.

1) First try to reset the electronics:

..... Power unit down by unplugging for one (1) minute.
..... Power unit up by reconnecting power.
..... Restart a new cycle.

Result: the door remained locked with the same error code.

2) Next manually unlock the door to see if the lock will reset and work normally again.

..... Power unit down by unplugging.
..... Remove the 3 screws holding the top cover attached to the
back.
..... Lift the top cover slightly to disengage and pull back 6 inches.
..... Use a flashlight to see the positioning of the door lock and the
manual plastic unlock tab on top.
..... Wiggle your arm down through the narrow opening on top and
pull up on the small plastic pull tab to unlock the door.
..... Power unit up by reconnecting power.
..... Restart a new cycle.

Result: the door remained locked with the same error code.

3) Finally, replace the lock assembly

..... Power unit down by unplugging.
..... Wiggle your arm down through the narrow opening on top and
pull up on the small plastic pull tab to unlock the door.
..... With the door now open, remove the wire spring retaining ring
around the rubber door gasket. On either side of the spring is a
place to grab it with needle nose pliers to assist in removing it.
..... Remove the 2 screws holding the lock assembly to the front
panel.
..... Pull back the gasket slightly near the lock assembly and
unplug the 2 electrical connections to the lock assembly.

..... Replace the lock assembly.
..... Pull back the gasket slightly near the lock assembly and plug
the 2 electrical connections to the lock assembly.
..... Use the 2 screws to attach the lock assembly to the front panel.
..... Attach the spring retaining ring around the door gasket. On
either side of the spring is a place to grab it with needle nose
pliers to assist in installing it. I also used a vise grip pliers to
help hold the spring retaining ring in place as I stretched the
spring. This step was the biggest problem for me and consumed
the most time.
..... Attach the top cover with the 3 holding screws
..... Power unit up by reconnecting power.
..... Restart a new wash cycle.

Result: the lock test cycle completed with no error codes and the wash cycle started normally.
  • George C. from POUGHKEEPSIE, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lock door not holding
replace the door lock with the parts i ordered
  • Bonifacio Vela from Los Angeles, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We needed a new Door Latch Assembly
Watch a video about replacing this latch which made it very simple to do. Performed exactly as the video instructed.
  • Rebecca from BOERNE, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
14 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
4.9
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11754810
Manufacturer Part Number: WPW10443885
Brand
Model Number
Description
Maytag
7MMHW5500FC0
Washer - Washer
Maytag
7MMHW5500FC1
Washer - Washer
Maytag
7MMHW5500FW0
Washer - WASHER
Maytag
7MMHW5500FW1
Washer - RESIDENTIAL
Maytag
7MMHW7100DC0
Washer - Washer
Maytag
7MMHW7100DW0
Washer - Washer
Whirlpool
7MWFW72HEDW0
Washer - WASHER
Whirlpool
7MWFW75HEFW0
Washer - WASHER
Whirlpool
7MWFW75HEFW1
Washer - RESIDENTIAL
Whirlpool
7MWFW81HEDW0
Washer - WASHER
Whirlpool
7MWFW87HEDC0
Washer - WASHER
Whirlpool
7MWFW90HEFC0
Washer - WASHER
Whirlpool
7MWFW90HEFC1
Washer - RESIDENTIAL
Whirlpool
7MWFW90HEFW0
Washer - WASHER
Whirlpool
7MWFW90HEFW1
Washer - RESIDENTIAL
Whirlpool
7MWFW95HEDU0
Washer - WASHER
Whirlpool
7MWFW97HDBD0
Washer - WASHER
Crosley
CFWH4084GW0
Washer - RESIDENTIAL
Maytag
MHW3000BG1
Washer - WASHER
Maytag
MHW3000BG2
Washer - WASHER
Maytag
MHW3000BW1
Washer - WASHER
Maytag
MHW3000BW2
Washer - WASHER
Maytag
MHW3100DW0
Washer - WASHER
Maytag
MHW3500FW0
Washer - WASHER
Maytag
MHW3500FW1
Washer - WASHER
Maytag
MHW3505FW0
Washer - WASHER
Maytag
MHW3505FW1
Washer - WASHER
Maytag
MHW4000BW1
Washer - AUTOMATIC WASHER
Maytag
MHW4000BW2
Washer - WASHER
Maytag
MHW4100DW0
Washer - WASHER
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service