LOCK, DOOR WPW10443885 | Official Whirlpool Part | Fast Shipping | PartSelect
https://partselectcom.azureedge.net/Schematics/Whirlpool/JV33CKRA.gif

LOCK, DOOR

PartSelect Number PS11754810

Manufacturer Part Number WPW10443885

Manufactured by Whirlpool

Troubleshooting

This part fixes the following symptoms:

Lid or door will not open | Lid or door won’t close

This part works with the following products:

Washer.

This part works with the following brands:

Whirlpool, Maytag, Amana, Crosley.

Part # WPW10443885 replaces these:

AP6021486, W10443885, WPW10443885VP.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 3 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rebecca from BOERNE, TX
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPW10443885
We needed a new Door Latch Assembly
Watch a video about replacing this latch which made it very simple to do. Performed exactly as the video instructed.
12 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Bonifacio Vela from Los Angeles, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WPW10443885
lock door not holding
replace the door lock with the parts i ordered
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
George C. from POUGHKEEPSIE, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WPW10443885
Error code: F5E3 - front loader door won't open
Maytag Washer MHW5100DW

Symptom: front loader door won't open

Error code at the beginning of a wash cycle: F5 E3 means your door latch isn't working properly which is why the door won't open.

1) First try to reset the electronics:

..... Power unit down by unplugging for one (1) minute.
..... Power unit up by reconnecting power.
..... Restart a new cycle.

Result: the door remained locked with the same error code.

2) Next manually unlock the door to see if the lock will reset and work normally again.

..... Power unit down by unplugging.
..... Remove the 3 screws holding the top cover attached to the
back.
..... Lift the top cover slightly to disengage and pull back 6 inches.
..... Use a flashlight to see the positioning of the door lock and the
manual plastic unlock tab on top.
..... Wiggle your arm down through the narrow opening on top and
pull up on the small plastic pull tab to unlock the door.
..... Power unit up by reconnecting power.
..... Restart a new cycle.

Result: the door remained locked with the same error code.

3) Finally, replace the lock assembly

..... Power unit down by unplugging.
..... Wiggle your arm down through the narrow opening on top and
pull up on the small plastic pull tab to unlock the door.
..... With the door now open, remove the wire spring retaining ring
around the rubber door gasket. On either side of the spring is a
place to grab it with needle nose pliers to assist in removing it.
..... Remove the 2 screws holding the lock assembly to the front
panel.
..... Pull back the gasket slightly near the lock assembly and
unplug the 2 electrical connections to the lock assembly.

..... Replace the lock assembly.
..... Pull back the gasket slightly near the lock assembly and plug
the 2 electrical connections to the lock assembly.
..... Use the 2 screws to attach the lock assembly to the front panel.
..... Attach the spring retaining ring around the door gasket. On
either side of the spring is a place to grab it with needle nose
pliers to assist in installing it. I also used a vise grip pliers to
help hold the spring retaining ring in place as I stretched the
spring. This step was the biggest problem for me and consumed
the most time.
..... Attach the top cover with the 3 holding screws
..... Power unit up by reconnecting power.
..... Restart a new wash cycle.

Result: the lock test cycle completed with no error codes and the wash cycle started normally.
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
6 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11754810
Manufacturer Part Number: WPW10443885
Brand
Model Number
Description
Maytag
7MMHW5500FC0
Washer - WASHER
Maytag
7MMHW5500FC1
Washer - RESIDENTIAL
Maytag
7MMHW5500FW0
Washer - WASHER
Maytag
7MMHW5500FW1
Washer - RESIDENTIAL
Maytag
7MMHW7100DC0
Washer - WASHER
Maytag
7MMHW7100DW0
Washer - WASHER
Whirlpool
7MWFW72HEDW0
Washer - WASHER
Whirlpool
7MWFW75HEFW0
Washer - WASHER
Whirlpool
7MWFW75HEFW1
Washer - RESIDENTIAL
Whirlpool
7MWFW81HEDW0
Washer - WASHER
Whirlpool
7MWFW87HEDC0
Washer - WASHER
Whirlpool
7MWFW90HEFC0
Washer - WASHER
Whirlpool
7MWFW90HEFC1
Washer - RESIDENTIAL
Whirlpool
7MWFW90HEFW0
Washer - WASHER
Whirlpool
7MWFW90HEFW1
Washer - RESIDENTIAL
Whirlpool
7MWFW95HEDU0
Washer - WASHER
Whirlpool
7MWFW97HDBD0
Washer - WASHER
Crosley
CFWH4084GW0
Washer - RESIDENTIAL
Maytag
MHW3000BG1
Washer - WASHER
Maytag
MHW3000BG2
Washer - WASHER
Maytag
MHW3000BW1
Washer - WASHER
Maytag
MHW3000BW2
Washer - WASHER
Maytag
MHW3100DW0
Washer - WASHER
Maytag
MHW3500FW0
Washer - WASHER
Maytag
MHW3500FW1
Washer - WASHER
Maytag
MHW3505FW0
Washer - WASHER
Maytag
MHW3505FW1
Washer - WASHER
Maytag
MHW4000BW1
Washer - AUTOMATIC WASHER
Maytag
MHW4000BW2
Washer - WASHER
Maytag
MHW4100DW0
Washer - WASHER