Average Repair Rating: 4.5 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Heard a loud “pop” and cook surface on indicator remained illuminated even with burners off.
Slide range out to access rear. Turn off circuit breaker and/or unplug stove. I did both. Removed four screws on top section on rear of range and CAREFULLY slid out the back plate. Disconnected all wires and plugs from old switch noting locations. Placed wires and plugs on new switch. Removed knob and then two screws from front of old swi
... Read moretch. Carefully placed new switch in proper location and screwed in the two front screws. CAREFULLY place the back plate in proper location and reattach with four screws. Clean floor and cabinet sides while range is out. Plug in range and/or turn on circuit breaker. Test switch operation and verify Cooking Surface On light only lights when switches are on. Slide range back into place.
Read less
Stephen from PLANTATION, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
WARREN
March 19, 2019
Is this dual infinite switch the one that controls the left front burner with inner and outer burner rings?
For model number WGE555S0BSOO
Hello Warren, thank you for your question. Yes, the Dual Infinite Switch WPW10441696 is the switch that controls the left front dual burner. Good luck with your repair!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Keith
March 18, 2020
Will this part work on the right front burner
For model number wge755cob5oo
Hello Keith, thank you for your question. Yes, that is the correct replacement switch for the right front burner. I hope this helps.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
March 26, 2023
Will the duel infinite switch fix the problem of the big burner turning on then after a few seconds turns off. the switch also clicks when turning on then clicks when turning off after a few seconds or is it a different part that is bad?
For model number KERS505XSS03
Hello Joe, thank you for reaching out. We have researched the model and would recommend checking the surface element, part number PS11751349, and the infinite switch, part number PS11752298, for continuity using a multimeter. If either of the components is faulty, the burner will not work properly. We hope this helps!
