Refrigerator Water Inlet Valve Assembly Specifications
This water inlet valve assembly is for refrigerators.
Water inlet valve assembly supplies water to the ice maker and water dispenser in the refrigerator.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Leaking | Not dispensing water
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Jenn-Air.
Part# WPW10420083 replaces these:
AP6021208, W10420083
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
5.0
Filter By Rating:
5 Stars
5
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
KEN W - November 15, 2020
Verified Purchase
Refrigerator part
The part came fast and it helped that you sent a picture to insure that I ordered the right part.
★★★★★
★★★★★
Randy R - July 21, 2020
Verified Purchase
Easy to change
Part fit perfectly
★★★★★
★★★★★
Vincent M - May 30, 2020
Verified Purchase
Same as original
Part was just as the original and fit perfectly.
★★★★★
★★★★★
BRIAN A - September 27, 2018
Verified Purchase
Water valve repair
Part shipped fast and as advertised. Easy to replace and got ice maker going again.
★★★★★
★★★★★
David B - July 20, 2018
Verified Purchase
Part fit perfect.
The part work and fit perfect, but probably didn’t have to change because the ice maker was the problem after all change out and is working perfect now.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No water and ice maker not working
Used a 1/4" nut driver for the project install, just one note when installing the water feed into the new inlet valve make sure it is seated properly, look for the indicator mark on the water feed. Very easy installation!
Christopher from WARREN, RI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
16 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marshall
March 12, 2018
How much resistance should there be in the ice water valve? I tested my valve and it read 196 ohms i feel this is to high but i’m not sure because my fridge water valve tested at 220ish ohms
Hi Marshall,
Thank you for your question. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Skip
December 3, 2017
I am only getting ice cubes that are 50% of their normal size. I have replaced the water filter and no change happened. Would this be a problem with the valve? Is the valve the same as a solenoid? If I need to replace it, do you have any tips?
For model number KFCS22EVMS8
Hello Skip,
Thanks for your question. Be sure to check the water lines as well to see if they are clogged or obstructed. If they are fine, check the water inlet valve and test it with a multi-meter for continuity. Replace it if it shows no continuity. It is the same as a solenoid. The part is easy to install as we include installation instructions with the part.
I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
John
September 3, 2019
My ice maker dose not fill up with water. It goes though the motion and sounds and the water dispenser works but no ice.
For model number WRF535SWHZ00
Hello John, Thank you for the question. The most common reason are frozen water lines not allowing water to pass through and fill the ice maker. I suggest checking the line to the ice maker and unthaw if needed. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Alan
October 23, 2019
My water dispenser delivers water slowly makes a juddering sound is the likley problem the water inlet valve ? Ice maker seems to be working ok.
For model number KBFS25EWMS8
Hello Alan and thanks for writing.
First part to check would be your water filter, make sure it is correctly inserted and filter might need to be replaced. This is recommended at least every six months.
Second check your cab filter # PS12731165 and then your water tube connector # PS11740187 as it seems your water dispenser is drawing air through a small crack in those connectors. We hope this helps. Please contact us anytime.
Hi, i connected water to this fridge for the first time and the water doesn't stop filling the ice makers... it just keeps running and overflows into the freezer and out the fridge.
For model number KFCP22EXMP5
Hello Shane, thank you for your question. If the water continuously the issue is most likely the water inlet valve, and will have to be replaced. The part number is PartSelect Number: PS11754529. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Melody
May 11, 2022
My ice maker stopped making ice but my water dispenser works fine. If the water inlet valve is bad would I still be getting water at the dispenser? Thank you……. Melody
For model number KFCS22EVMS8
Hi Melody,
Thank you for your question. If your ice maker stopped making ice, the water inlet valve is one part that you will need to check. There are some other parts that you will need to check to see which one is causing the issue. You will also need to check the water fill tubes, the water filter and the ice maker. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Where is the icemaker inlet valve physically located
For model number WRF540CWBW01
Hello Steve, Thank you for the question. The valve is locates at the back of the appliance where the water supply hooks up tot he appliance. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kenny
June 26, 2023
My daughter bought a resale house that comes with the subject fridge. With some trouble-shooting we came to the conclusion the water control valve is missing. With that said, once I order a replacement water control valve from you.
For model number KRFC300ESS01
Hello Kenny, thank you for the query. The water inlet valve, part number PS11754529, you mentioned is compatible with your model. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Toby
February 15, 2024
We don't use the ice maker but we do use the water dispenser inside the refrigerator. Today I went to fill up our coffee pot and no water came out. You can hear the pump humming but no water. I checked to ensure there were no kinks in the water lines. What is the most likely problem?
For model number WRF535SWBM00
Hello Toby, thank you for reaching out. Based on the description that you have provided, we would recommend checking the water inlet valve, part number PS11754529, to fix the issue. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
February 20, 2024
Water dispenser is slow and makes a rattling noise during and after use. I changed filter, still happens. Need new pump?
For model number KRFC302ESS00
Hello David, thank you for contacting us. According to our research, the issue could be with the water inlet valve, part number PS11754529. It supplies water to the ice maker and water dispenser in the refrigerator. We would recommend checking it to fix the issue. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
