Average Repair Rating: 1.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are
... Read more two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roy
May 16, 2019
Is the left rear burner head same as the left front ? I need a left front
Thanks
roy
For model number KGSK901SSS00
Hello Roy, thank you for inquiring. No, they are not the same. The front left Burner Head is part PS11754345, and the back left Burner Head is part PS11754341 on your model.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
December 18, 2019
Do you carry switch fuses for my jennair?
For model number jes8850baf
Hi Donna, thank you for your question. The part you are requesting on has been discontinued and we have no known replacement listed in our system. We have no further information. You are welcome to contact the manufacturer of the part to see if they have recently released a new substitute. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeffrey
February 7, 2024
What is the part number for the back right burner?
For model number KDSS907SSS00
Hi Jeffrey, thank you for the question. The back right burner for your model is part number PS11754341. If you need help placing an order, customer service is open 7 days a week!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gerald
May 11, 2022
I need a right front burner head. It measures only 2 3/8" at the base. Would you happen to have one?
For model number W3CG3014XB02
Hello Gerald, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11754341. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
John
November 10, 2017
The Flame coming out at the burners is not even on the left front burner. The right right front burner sparks but will not light. Cannot find a reason in your help section for ether of these issues. Or replacement part for the igniter. I have cleaned and removed and reseated etc: And still not a good clean Flame.
For model number GFG451LVS1
Hi John,
Thank you for your question. It sounds like you will want to check your electrode or igniters as to what could be the problem with your right front burner igniting. Unfortunately for your left hand burner, you may actually have to replace that burner to fix the issue that you are having. Good luck with your repair.
Was this helpful?
Thank you for voting!
Oneil
December 10, 2018
I’m replacing all four burner heads and the mounting screws on my range. What are the correct part numbers for the burner head/orifice mounting screws and smallest burner head.
Hello O'Neil, Thank you for the question. The Small Burner Head is Part Number: PS11754341 and the screw is Part Number: PS11742240. Hope this helps, good luck with this repair!
