Quick Question!

Have you ever purchased from PartSelect.com before?

11754067-1-S-Whirlpool-WPW10388414-Drive Belt
11754067-1-S-Whirlpool-WPW10388414-Drive Belt 11754067-2-S-Whirlpool-WPW10388414-Drive Belt https://www.partselect.com/Schematics/Maytag/JMJR7WCM.gif

Drive Belt

Your Price

$32.47
Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11754067
Manufacturer Part Number WPW10388414
Manufactured by Whirlpool

This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear. NOTE: Per Manufacture, belt measures 48.22" long uninstalled and the belt will stretch To 51.53" when installed.

This part works with the following brands: Kenmore, Whirlpool, KitchenAid, Maytag.

This part works with the following products: Washer.

This part fixes the following symptoms:

  • Pumps but will not spin.
  • Noisy.
  • Will not agitate.
  • Shakes and moves.
  • Burning smell.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

My machine makes a loud of noise when it is spinning. Is this normal? It has done for a long time ( two years ) and nothing has broken yet. The machine had a previous owner. It was in the house when i bought it. Thanks for your answer.

Manuel for model number WFW9750WW01
Answer:

Hi Manuel, Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the drain pump, the drive belt, the drum drive pulley, the tub gasket, the shock absorbers, the springs, the driver motor and the dispenser actuator switch. I hope this helps. Thank you and have a great day!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 5 reviews What's this?
1-5 of 5
 

96 of 114 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Francis from Rochester, NY

Washer made loud banging noise during spin cycle

I first removed the back panel held on by about 10 screws. I removed the drive belt from the pulley, then removed the lock nut securing the pulley to the drum & removed the pulley. Attached the new pulley to the drum, tightened on the lock nut, attached the new belt & ran a spin cycle. When that went OK I replaced the back panel & the washer was back in service.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

26 of 37 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: wendy from Naples, FL

Belt came off

Removed back panel,unscrewed the nut on the pulley.Removed pulley and belt. Reassembled.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

24 of 36 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Wrench (Adjustable)
Customer: john from chester, NH

Drum didn't turn/spin

1) Removed back of washer
2) Removed nut holding pulley
3) Pulled pulley off shaft
4) Put new pulley on shaft
5) Replaced and tightened nut
6) Replaced belt on pulley
7) Replaced back panel
7) Washed pile of laundry

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 24 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers, Wrench (Adjustable)
Customer: Doug from Hartselle, AL

Would not spin of agitate

I first had to take off the back and the top to get to the pulley and the belt. The pulley had woobled so much that it had worn out the center nad it would no longer hold to the post in the tub. It also had cut into the back of the tub about a 1/4 to 1/2 inch. I unscrewed the nut holding the pulley and removed it. I then took a knife and trimmed the rough edges off the back of the tub to make it smooth. I then smoothed out the end of the post that the pulley fits on so the new pulley would fit. I tightned the nut and put the belt on the motor drive shaft and Used a robo grip to hold the belt as I turned it onto the pulley. I but the back and top back on and that was it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Drive Belt
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: claude van from big sandy, TN

Tub would not turn

take the back cover off and put belt on. the belt is a tight fit and requires sone effort, but can be done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11754067
Manufacturer Part Number: WPW10388414
Brand Model Number Description
Kenmore11042822200Washer
Kenmore11042822201Washer
Kenmore11042822202Washer
Kenmore11042822203Washer
Kenmore11042824200Washer
Kenmore11042824201Washer
Kenmore11042824202Washer
Kenmore11042824203Washer
Kenmore11042826200Washer
Kenmore11042826201Washer
Kenmore11042832200Washer
Kenmore11042832201Washer - Kenmore Washing Machine
Kenmore11042834200Washer
Kenmore11042834201Washer
Kenmore11042836200Washer
Kenmore11042836201Washer
Kenmore11042922200Washer
Kenmore11042922201Washer
Kenmore11042922202Washer
Kenmore11042922203Washer
Kenmore11042924200Washer - Kenmore Washing Machine
Kenmore11042924201Washer
Kenmore11042924202Washer
Kenmore11042924203Washer
Kenmore11042926200Washer
Kenmore11042926201Washer
Kenmore11042926202Washer
Kenmore11042926203Washer
Kenmore11042932200Washer
Kenmore11042934200Washer