Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ted M - February 19, 2022
Verified Purchase
Correct part was sent me
Was not hard to replace. Works great after replacing old valve that was leaking.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
water would drip into tub between uses
Unplugged washer, turn off water to washer, removed water lines from washer, pull washer away from wall, removed about 5 screws from top access panel and remove, used putty knife to release clips from both sides of front control panel and lay forward, removed three screws from valve, disconnect hose from valve. Reassemble in reverse order
... Read more. Not a bad idea to run a little water into bucket from both supply line to remove any foreign material that may have let lose from shut off valve before reconnecting to washer.
Read less
Dale from MANDAN, ND
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
February 11, 2018
Do you have a video instructions to replace water inlet valve ps11753661?
For model number MVWC300XW1
Hi John, Thank you for the question. Very sorry but we do not have a video for this valve as of yet but here is a link to a video for a valve. It will have the same basic steps for replacement. Hope this helps!
https://www.youtube.com/watch?v=hjiKQ9Ye58Q
4 people found this helpful.
Was this helpful?
Thank you for voting!
Dainius
February 8, 2023
Does this inlet valve match my W10337349, my valves contacts turned to the left, this one to right
For model number WTW4950XW0
Hello Dainius, Thank you for your inquiry. While we do not show your part number W10337349, we do show that part numbers PS11754670 (a complete assembly with vacuum break and wiring harness) and PS11753661 (just the valve) are the water inlet valves listed by the manufacturer as compatible to the model number that you have provided. We hope this helps you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pam
September 16, 2021
My repairman changed the inlet valve today but now the console is loose. Did he ruin the spring clips?
For model number 110.21202010
Hello Pam, Thank you for the question. It is more then likely the Console Clips were damaged when removing and opening up the console. We also suggest checking the End Caps to make sure they are installed properly. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
