Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
April 18, 2018
The damaged electronic control board I got on my dishwasher is w10311140, rev e. I have ordered from some source other board w10352582, rev.B that supposed to be compatible with my dishwasher but after comparing two boards, I realized that there is a slight differences between both of them. I want to know if the board from your place is the same as the original mine or it could be with the different components, similar as I received. A new board has less components so I'm thinking that some dishwasher options will not work.
For model number KUDE70FXSS0
Hi Leo, Thank you for the question. Checking this board it is showing to be a Rev B. I suggest contacting the manufacture directly to see if the Rev B can be used and what options will not work if you do install it. Checking the model number this is the only board available. Hope this helps!
Was this helpful?
Thank you for voting!
January 31, 2019
The dishwasher was not drying dishes and i found that the element was burnt in half so i replaced it and still not drying the dishes. Also checked the thermostat and it checks out ok. Any other causes?
For model number KUDE70FXSS3
Hello Cody, thank you for your question! It is possible that your appliance is not going into the drying cycle properly, which could indicate a problem with the control board. We hope this helps!