Whirlpool/Whirlpool_Thumb/GOCZNL9X.gif
See part 7 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Water Inlet Valve

★★★★★
★★★★★
16 Reviews
$ 61.33   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11752927
Manufacturer Part Number WPW10327249
Manufactured by Whirlpool
Product Description

Water Inlet Valve Specifications

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not fill with water | Leaking | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Maytag.
Part# WPW10327249 replaces these:
AP6019618, W10316814, W10327249, W11130743, WPW10327249VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Joy
    March 19, 2018
    My dishwasher seemed normal, but when the cycle was done, i realized that no water ever got into the machine; (lights worked, sounded like it was running.) the dishes were still dirty, the detergent had spilled out inside the door. What part would i need for this. The machine did sound a little different, but not noisy
    For model number KUDS30ISSA
    Hi Joy, Thank you for your question. if your dishwasher is not filling with water, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the water inlet valve, the circulation pump and motor, the overfill control switch, the hose clamp, the door balance link, the drain hose and the impeller and seal kit. I hope this helps. Thank you and have a great day!

    11 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Dennis
    December 7, 2017
    If the water inlet valve is bad,or sticks open, would this cause water to pour out of the dishwasher under the door?
    For model number MDB4949SDM
    Hi Dennis, Thank you for the question. If the valve is stuck open it is allowing the dishwasher to overflow and will cause the water to leak from the bottom of the door. Hope this helps!

    4 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Carlos
    February 18, 2018
    This is an inlet water valve for a kitchen aid. Part #w10316814. I am quite certain this is bad, it measures a resistance of 1000 ohms. What should the approximate resistance be?
    Hi Carlos, Thank you for the question. The best way to test the valve is to check for power going to the valve. If there is power there, and no water, you will need to replace the water valve. Hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Greg
    February 27, 2018
    What voltage is the valve supposed to receive? It appears mine is getting 30vac.
    For model number KUDS35FXSSg
    Hello Greg, thank you for your question. The water inlet valve requires 110-120 volts to open. I hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Joe
    January 19, 2018
    Water pours in and does not stop and ultimately flows out the door. I think it is the valve that needs replacing but I keep seeing the overflow switch too. Can you help?
    For model number MDB4949SDM1
    Hello Joe, Thanks for your question. We would recommend testing both the water inlet valve and the overflow control switch for continuity with a multimeter, and replace either of them if they do not show continuity. The water inlet valve is more commonly at fault but it is a good idea to test both parts. I hope this helps.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Carol
    November 7, 2018
    I had damage to my hoses from a rodent. We can replace the hoses but it seems the hard rubber elbow that attaches to the pump has been damaged also. We are not able to reconnect the hoses to what i assume is the pump. The part is held together with 2 clamps and i cannot find anything on your diagram that help identify what i am looking for. Do you think this dishwasher is repairable?
    For model number WDF760SADW0
    Hi Carol, thank you for your question. If this is the part that you inlet hose plugs into, then you would need to replace your valve. If it is the part that your drain hose connects to you will want to take a look at your Pump, Washarm And Motor Parts diagram. It sounds like that is the area that you are talking about. You will need to either replace the hose, part 20 in the diagram. Or you will need to replace the pump itself, part 9 in the diagram. I hope that helps. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Marc
    May 14, 2019
    Are the following 2 inlet valve identical : W10327249 and w10327250? Can i replace one with the other?
    For model number maytag dishwasher mdb7759aws3
    Hello Marc, thank you for your question. Those two Water Inlet Valves are different. The correct replacement for your model is Inlet Valve part PS11738107.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Alex
    June 19, 2019
    My daughter's dishwasher spray arms don't seem to be working. I have changed the water inlet valve. The float switch tests ok. The spray arms and tub filters are clean. The machine will fill with about 1 to 2 inches of water. On the 1hr cycle it seems and sounds to be working,(clicking, humming & draining) and it took 1hr to go through the cycle, but the spray arms don't seem to be working. The normal cycle seems to act the same way but takes a very long time. She is on city water supply and there is plenty of pressure.(noticed that when i turned water back on after changing water inlet valve.I am suspecting the pump to be the trouble but don't know how to test it. Is there a diagnostic test that i can run?
    For model number WDF750SAYM1
    Hello Alex, thank you for writing. You may want to consider the Turbidity Sensor part PS11757214 or the Circulation Pump part PS11755825. You can test the Circulation Pump with a multi-meter. It should measure above 100 ohms to be working correctly. We hope this helps.

    Was this helpful?
    Thank you for voting!
    Carl
    November 24, 2019
    I am in need of the electrical connector that attaches to the water inlet valve. Mice have chewed the wires into right at the connector so there is no wire to re-splice to. Where can I purchase this connector with leads?Thank you
    For model number WDF780SLYB0
    Hello Carl, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11756725 for the Wire Harness. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Part Videos

      Replacing your Whirlpool Dishwasher Water Inlet Valve

      Customer Repair Stories
       Average Repair Rating: 4.3 / 5.0, 2 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        High pitched noise when the washer filled at the beginning of the cycle.
        Watched the video, it went as advertised. Easy repair and the noise is gone.
        • Robert from E GRAND FORKS, MN
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Pliers, Screw drivers
        • Parts Used:
          WPW10327249
        4 of 4 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        No water was entering the dishwasher.
        Disconnected the water hose entering and one electrical plug alone with one screw that holds the valve to the machine. Replaced the old with the new and it worked.
        • Joseph from WAKE FOREST, NC
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          WPW10327249
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          16 Reviews
          4.3
          Filter By Rating:
          • 5 Stars
            12
          • 4 Stars
            1
          • 3 Stars
            0
          • 2 Stars
            1
          • 1 Star
            2
          Sort by:
          Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11752927
          Manufacturer Part Number: WPW10327249
          Brand
          Model Number
          Description
          Kenmore
          66512093K210
          Dishwasher - UNDERCOUNTER DISWASHER
          Kenmore
          66512723K310
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66512723K311
          Dishwasher - DISHWASHER
          Kenmore
          66513032K110
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513032K111
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513032K112
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513032K113
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513032K114
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513032K115
          Dishwasher - DISHWASHER
          Kenmore
          66513032K116
          Dishwasher - DISHWASHER
          Kenmore
          66513033K110
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513033K111
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513033K112
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513033K113
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513033K114
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513033K115
          Dishwasher - DISHWASHER
          Kenmore
          66513033K116
          Dishwasher - DISHWASHER
          Kenmore
          66513039K110
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513039K111
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513039K112
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513039K113
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513039K114
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513039K115
          Dishwasher - DISHWASHER
          Kenmore
          66513039K116
          Dishwasher - DISHWASHER
          Kenmore
          66513042K110
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513042K111
          Dishwasher
          Kenmore
          66513042K112
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513042K113
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513042K114
          Dishwasher - UNDERCOUNTER DISHWASHER
          Kenmore
          66513042K115
          Dishwasher - DISHWASHER

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service