Part Location Diagram of WPW10324262 Whirlpool Oven Bake Igniter
See part 13 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Oven Bake Igniter WPW10324262

 Fits your WEG745H0FS0!
★★★★★
★★★★★
7 Reviews

Rated by 2 customers 

Very Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 87.01
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WEG745H0FS0!
PartSelect Number PS11752876
Manufacturer Part Number WPW10324262
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light | Little to no heat when baking
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Maytag, KitchenAid, Jenn-Air.
Part# WPW10324262 replaces these:
AP6019567, W10324262
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
5.0
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Faulty ignitor
Remove bottom plate take screws and hex head nuts remove wire unscrew ingnitor reverse process with new ignitor very easy
  • Mark from HOLLAND, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignoter gave out
Opened oven... removed grates and bottom panel. Unbolted igniter has flange and end wire. Attached end wire to new igniter and reattached new igniter to gas flange. The rest in reverse and set oven and pressed start.
  • Michael from CHICAGO, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

11 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
January 3, 2018
My oven most of the time lights and sometimes it doesn’t then we smell gas
For model number WFG540H0AW0
PartSelect logo
Hi Jim, Thank you for your question. There are a couple of parts that you should check. I would suggest testing your igniter and make sure that the part is working correctly. You would smell gas because your valve is open to start working. If your igniter is fine you may have to change your spark control module. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Bill
July 4, 2019
Customer complains of gas smell when using oven. Smell comes from vent on top of oven. I'm thinking ignitor.Your thoughts to this issue. Thanks, bill
For model number WFG540H0EW1
PartSelect logo
Hello Bill, thank you for writing. The scent of gas is normal for a few seconds after turning the oven on, but should dissipate quickly. If it does not, it could indicate an issue with either the Oven Igniter part PS11753053 or the Oven Bake Igniter part PS11752876 for your model. We hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Jim
March 17, 2018
When the oven comes on, I hear the normal clicking to ignite the burner, but the oven burner will not ignite. The broiler ignites fine. The stove top burners work fine. Would this be the correct replacement part to fix this problem? Or would the oven sensor more likely be the problem?
For model number WFG710H0AH1
PartSelect logo
Hello Jim, Thanks for your question. You may want to test the oven igniter with a multimeter for electrical continuity, and replace it if it shows no continuity. You should also test the oven sensor, part number PS11749737. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jim
May 5, 2018
When installing this igniter, does it just slip out of hole or is it attached to something? I don’t want to force it and brake it. Thank you.
PartSelect logo
Hi Jim, Thank you for your question. We do not have any information on this part specifically however here is a video that will show you how that installation usually goes: https://youtu.be/mGM6_FxEkNE. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Eli
November 20, 2018
My question is the oven will start then when it goes to fire up again you hear the clicking but then it’s not relighting any help would be great
For model number Mgr8775as1
PartSelect logo
Hi Eli, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the sensor checks out fine, you will need to check oven igniter, the spark module and the electronic control board. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Pamela
October 28, 2019
I turn on the oven but i do not here any clicking and the oven does not come on. Would the oven igniter be the correct part to replace?
For model number Kgrs202bss0
PartSelect logo
Hello Pamela, thank you for inquiring. It is possible that this may be caused by a faulty Oven Bake Igniter, this part number PS11752876 for your model range. You may also want to consider the Spark Module, part number PS11753037. You can test the ohms of resistance on the Oven Bake Igniter with a multi-meter. It should read between 40 and 400 ohms to be functioning correctly. Good luck with your repair!

Was this helpful?
Thank you for voting!
Gerald
February 22, 2020
My oven won’t ignite. I smell gas but no Flame
For model number WFG540H0AS0
PartSelect logo
Hello Gerald, Thank you for your question We have done an investigation into your model WFG540H0AS0, we have discovered that the Spark Module would be the most accurate cause of your symptoms. It is available under part number PS11753037. If the spark module is not functioning properly, it can cause the gas to feed, but not to light. We hope this helps you.

Was this helpful?
Thank you for voting!
Related Parts:
Paul
June 25, 2021
Hi. The bake element in my oven lights then goes out 2-3 seconds later. I can hear the gas valve solenoid click to open. The igniter lights the burner. I removed the burner and cleared a small amount of debris, cleaned and blew out the burner, then lightly sanded the igniter. The burner resumed to operate normally for 2 weeks then began to act up again. I measure 0.2ohms between the connector and tip of the igniter (near perfect conductor). I see in an above post that 40-400ohms is expected? Igniter to chassis ground reads 3.5Mohms. I read somewhere that the igniter on this model may provide feedback to the control module to indicate flame presence? Is this the correct part to replace?
For model number KSGG700ESS0
PartSelect logo
Hi Paul, Thank you for your question. If the bake igniter goes out after a few seconds, then it will need to be replaced. We hope this helps! Good luck with the repair!

Was this helpful?
Thank you for voting!
Jeff
October 26, 2022
The display on oven will not respond to touching bake icon, if unplug for 15 minutes, will let me turn on oven bake---1) haven't baked 2)next time bake icon won't work-----repeat a few times and still doesn't work---is this a problem with oven display panel or could there be a problem with sensor/ignitor----the stove top works fine. Thank you
For model number WFG775H0HW0!
PartSelect logo
Hello Jeff, thank you for contacting us. The issue you described is most probably related to a defective control panel, part number PS12348509, and/or a faulty electronic control board, part number PS12348352. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

Was this helpful?
Thank you for voting!
Related Parts:
Andrea
November 18, 2022
Broiler lights. Bake mode clicks and doesn’t light. Is there a difference between this part and a spark igniter? Which would work
For model number Mgr8800fz
PartSelect logo
Hello Andrea, thank you for contacting us. The issue is most probably related to a faulty oven bake igniter, part number PS11752876. It ignites the gas to light the bake burner. It is different from the spark igniter. We would also recommend inspecting the oven bake burner, part number PS10067058. Please reach out to customer service if you need help placing an order. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752876
Manufacturer Part Number: WPW10324262
Brand
Model Number
Description
Kenmore
66475123610
Range - GAS RANGE
Whirlpool
IGL730CS0
Range - GAS RANGE
Jenn-Air
JGS1450DB0
Range - GAS RANGE
Jenn-Air
JGS1450DB1
Range - GAS SLIDE
Jenn-Air
JGS1450DP0
Range - GAS RANGE
Jenn-Air
JGS1450DP1
Range - GAS SLIDE
Jenn-Air
JGS1450DS0
Range - GAS RANGE
Jenn-Air
JGS1450DS1
Range - GAS SLIDE
Jenn-Air
JGS1450FB0
Range - GAS SLIDE IN RANGE
Jenn-Air
JGS1450FP0
Range - GAS SLIDE IN RANGE
Jenn-Air
JGS1450FS0
Range - GAS SLIDE IN RANGE
Maytag
JGS1450FS1
Range - Gas Slide-In Range
KitchenAid
JGS1450ML0
Range - Model # Jgs1450ml0 Official Kitchenaid Range/Oven, Gas
KitchenAid
KFGG500EBL0
Range - GAS RANGE
KitchenAid
KFGG500EBL1
Range - GAS FREE STANDING
KitchenAid
KFGG500EBL2
Range - GAS FREE STANDING
KitchenAid
KFGG500EBS2
Range - GAS RANGE
Whirlpool
KFGG500EBS3
Range - Range
KitchenAid
KFGG500EBS4
Range - Model # Kfgg500ebs4 Official Kitchenaid Gas Range
KitchenAid
KFGG500EBS7
Range - Model # Kfgg500ebs7 Official Kitchenaid Range/Oven, Gas
KitchenAid
KFGG500ESS0
Range - GAS RANGE
KitchenAid
KFGG500ESS1
Range - GAS FREE STANDING
KitchenAid
KFGG500ESS2
Range - GAS FREE STANDING
KitchenAid
KFGG500ESS3
Range - Model # Kfgg500ess3 Official Kitchenaid Gas Range
KitchenAid
KFGG500ESS6
Range - Model # Kfgg500ess6 Official Kitchenaid Range, Gas
KitchenAid
KFGG500ESS7
Range - Model # Kfgg500ess7 Official Kitchenaid Free Standing Gas Range
KitchenAid
KFGG500EWH0
Range - GAS RANGE
KitchenAid
KFGG500EWH1
Range - GAS FREE STANDING
KitchenAid
KFGG500EWH2
Range - GAS FREE STANDING
Whirlpool
KFGG500EWH3
Range - Range
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service