11752850-1-M-Whirlpool-WPW10323423-Spray Arm Manifold
Part Location Diagram of WPW10323423 Whirlpool Spray Arm Manifold
See part 6 in the diagram
( Grid squares measure 1x1 inch )
11752850-1-S-Whirlpool-WPW10323423-Spray Arm Manifold 11752850-2-S-Whirlpool-WPW10323423-Spray Arm Manifold 11752850-3-S-Whirlpool-WPW10323423-Spray Arm Manifold Part Location Diagram of WPW10323423 Whirlpool Spray Arm Manifold
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Spray Arm Manifold WPW10323423

★★★★★
★★★★★
1 Review

Rated by 3 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 50.61
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11752850
Manufacturer Part Number WPW10323423
Manufactured by Whirlpool
Product Description

Spray Arm Manifold Specifications

This part supplies water from the pump outlet at the bottom of the tub to the upper spray arm.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool.
Part# WPW10323423 replaces these:
AP6019541, 8268356, W10323423
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carolyn W - September 4, 2018
  Verified Purchase
Super easy repair!
Parts were received quickly and the repair actually took maybe 3 minutes total, very easy and now the middle arm rotates instead of getting caught.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Spray arm was deteriorated and leaking bady. Top shelf dishes were not getting clean
Removed top basket. Layed on table upside down. Removed one screw. Removed broken part. Replaced with new part. Installed screw
Put basket in dishwasher. Ran a load. Worked perfectly perfectly.
  • Tommy J. from BRENHAM, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper spray arm assembly broken
Had trouble finding my model dishwasher so i called Part Select and we were able to identify the same parts from a newer model. Repair was to replace the entire spray arm assembly, it went well with no problems.
Other Parts Used:
Spray Arm - Middle Screw Spray Arm Seal Spray Arm Manifold Water Supply Manifold Probe Upper Wash Arm Mount Upper Wash Arm Kit Push in Screw Cover
  • William P from Marsing, ID
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
12 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Glasses in the top shelf had food bits - not rinsing well
The most difficult part of this was figuring out the problem was with the middle spray arm - that it was not spinning (and thus not rinsing the top dishes). I could spin it by hand fine - but if I watched its position while the machine was running (open/close the door) I saw it wasn't moving. I took out the top shelf (with spray arm attached) and connected it to the garden hose. I could see then that the arm was sagging and hitting the rear connection, preventing it from spinning. To replace I removed the plugs from the top shelf side-rails (bend the rail open with your thumb and tip the plugs out of the rail to the right for the left rail, to the left for the right rail. this is easier than pulling them out the end of the rail). Slide out the top shelf. Turn over, remove the phillips screw and pull off the manifold, and middle spray arm. Replace with the new parts. I also replaced the top spray arm (which was very loose, and probably not spraying well because it was so loose). For this I unclipped the top feed tube and pulled off the old sprayer. Put a towel in the bottom rack of the washer so you don't drop the little pieces into the pump below. The top spray arm simply snaps in with the two connectors (the pointy one attaches through the feed tube).
Read less
Other Parts Used:
Spray Arm - Middle Spray Arm Seal Spray Arm Manifold Upper Wash Arm Kit
  • Clifford from Centennial, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
79 of 89 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patti
April 15, 2018
Spray arm manifold part #ps11752850 in the diagram shows a cone at the end where it connects. The part order picture doesn't show that cone. I don't have the sealing cone at the end now and I believe that is why I have no pressure in the upper arm . Is that cone a different part or is it included?
For model number GU2455XTST3
PartSelect logo
Hi Patti, Thank you for the question. This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts. The cone part is not needed on this model. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Push in Screw Cover
$6.89
$6.89
  In Stock
Upper Wash Arm Mount
$46.05
$46.05
  In Stock
Spray Arm Tube Hanger
$15.73
$15.73
  In Stock
Spray Arm Seal
$13.70
$13.70
  In Stock
Spray Arm - Middle
$56.71
$56.71
  In Stock
Water Supply Manifold Probe
$34.12
$34.12
  On Order
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752850
Manufacturer Part Number: WPW10323423
Brand
Model Number
Description
Kenmore
66513752K600
Dishwasher
Kenmore
66513752K601
Dishwasher
Kenmore
66513752K602
Dishwasher
Kenmore
66513752K603
Dishwasher
Kenmore
66513753K600
Dishwasher
Kenmore
66513753K602
Dishwasher
Kenmore
66513754K600
Dishwasher
Kenmore
66513754K602
Dishwasher
Kenmore
66513759K600
Dishwasher
Kenmore
66513759K601
Dishwasher
Kenmore
66513759K602
Dishwasher
Kenmore
66513759K603
Dishwasher
Kenmore
66513762K600
Dishwasher
Kenmore
66513762K601
Dishwasher
Kenmore
66513762K602
Dishwasher
Kenmore
66513762K603
Dishwasher
Kenmore
66513763K600
Dishwasher
Kenmore
66513763K601
Dishwasher
Kenmore
66513763K602
Dishwasher
Kenmore
66513764K600
Dishwasher
Kenmore
66513764K601
Dishwasher
Kenmore
66513764K602
Dishwasher
Kenmore
66513764K603
Dishwasher
Kenmore
66513769K600
Dishwasher
Kenmore
66513769K601
Dishwasher
Kenmore
66513769K602
Dishwasher
Kenmore
66513769K603
Dishwasher
Kenmore
66513772K600
Dishwasher
Kenmore
66513772K601
Dishwasher
Kenmore
66513772K602
Dishwasher
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Spray Arm Manifold
$ 50.61
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.