Refrigerator Electronic Control Board WPW10317076

Hello Catherine, thank you for contacting us. The replacement Electronic Circuit Board for the model number you provided is part number PS11750388. Good luck with your repair!

Hi Mike, thank you for reaching out. We have found programming instructions for your electronic control board: The Program Code is located on the Serial Plate on this unit after the word Code. 1. Press and hold the Door Alarm Keypad. 2. Press and hold Freezer Temperature DOWN /- Keypad within 3 seconds. 3. Release the Door Alarm Keypad and wait 3 seconds. 4. The control will display PE to indicate the programming mode. 5. Entry is confirmed by pressing the Freezer Temperature DOWN /- Keypad once more. 6. The control will display the current Program CODE. This value should be validated with the program CODE printed on the unit serial plate. If the Program CODE is correct, the Programming Mode is exited by pressing Door Alarm Keypad for 3 seconds. 7. Press the Refrigerator Temperature UP /+ Keypad or Refrigerator Temperature DOWN /- Keypad to change the digit value with each key press. 8. The decimal point indicates the selected digit. Press the Freezer Temperature UP /+ Keypad to select the next digit. 9. Once the desired Program CODE is entered, press and hold the Freezer Temperature DOWN /- Keypad until the Program CODE begins flashing indicating it has been saved. The Programming mode can be exited at any time by pressing the Door Alarm key for 3 seconds or will exit if unattended for four minutes. We hope this helps!