Quick Question!

Have you ever purchased from PartSelect.com before?

11752540-1-S-Whirlpool-WPW10310274-Bake Element
11752540-1-S-Whirlpool-WPW10310274-Bake Element https://partselectcom.azureedge.net/Schematics/Maytag/59291.gif

Bake Element

Your Price

$51.40
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11752540
Manufacturer Part Number WPW10310274
Manufactured by Whirlpool

This bake element is found on the bottom of the oven.

This part works with the following brands: Jenn-Air, Whirlpool, Maytag, Amana, Magic Chef.

This part works with the following products: Range.

This part fixes the following symptoms:

  • Little to no heat when baking.
  • Element will not heat.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

I just ordered a new baking element for my Maytag oven. The old one had broken in two. I knew to expect both rear terminals to be attached to wires coming from the two holes in the rear of the oven. However only one terminal was connected to a wire. I was very careful when i pulled the old element out so as to not "lose" the wires through to the back of the unit. I also felt way back into the hole and could not find any wire. Is there any possibility that this element has electricity to only one terminal??

gary
Answer:

Hello Gary, Thank you for your question. Your oven element would require two wires to complete the circuit. You may need to remove the back panel on your unit to see if you can locate the second wire. It is possible the terminal connection may have come off as the broken element was being removed. The wire can fall quite far down as the only thing securing them in place is the terminal connection itself. I hope this helps!

Most Recent

Question:

Oven on bake only heats to about 200 degrees, does that mean i need to replace the bake element ?

Dan for model number JES9705BAS
Answer:

Hi Dan, Thank you for your question. It could be your bake element. I could also suggest testing your over temperature probe as well. You can test both of your parts with a multi meter. Good luck with your repair.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 7 reviews What's this?
1-7 of 7
 

20 of 27 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Elaine from Orfordville, WI

Needed new element. Old one burnt in two

unscrewed and unplugged the old one and plugged in and screwed in the new one. EASY!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

12 of 15 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Christopher from Daphne, AL

Bake element failed

Removed 2 screws holding element to stove then gently pulled element forward to exposed lead connections and disconnected leads to element then reconnected leads to new element and gently pushed element ends back into the openings in the back of the stove and replaced screws to hold element to stove

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Andrew from SAINT PAUL, MN

Lower range burner element burned out

Should have been under the 'very easy' category, unscrew 2 screws, pull out old element, disconnect wires, reconnect new wires and screw back in. Unfortunately the right wire disconnected while pulling out the element, so I had to pull the the stove out, disconnecting vents in the process, then remove the back to be able to feed the wire back in thru the element hole . While back here I noticed that the reason the wire came off is that the way it was routed behind the stove cover was such that there was virtually no slack to be able to pull the element out in the first place. I'll bet that at the factory, the element was installed first, THEN the wires were connected. Whoever was on the line that day made extra sure of no slack in back, and that made the job take 5-6 times longer than it should have. As for the part replacement, it was a perfect match to the original part so it was super easy once the wire got back in the oven...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ricky from JASPER, TX

My old element finally went out

Easy peasy...1. Take 2 screws out to remove the back cover. 2. Unplug the 2 wires from the element. 3. Remove the 2 screw holding the element from inside the oven and take out the old element. Repeat the steps above in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 5 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Kevin from Norfolk, VA

Bake element blew up

took the old one out (two phillips head screws)and put the new one in. done. took about 5-6 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 5 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: steve from mcminnville, OR

Element burn out

unplug and plug in new

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
  • Bake Element
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: svetlana from chicago, IL

Bake element needed replacement

replacement was very easy, took 5 min

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-7 of 7

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11752540
Manufacturer Part Number: WPW10310274
Brand Model Number Description
AmanaAES1350BAWRange - Slide-in, Electric
AmanaAES3540BAWRange - Slide-in, Electric
AmanaAES3760BABRange - Slide-in, Electric
AmanaAES3760BAQRange - Slide-in, Electric
AmanaAES3760BASRange - Slide-in, Electric
AmanaAES3760BAWRange - Slide-in, Electric
AmanaAES3760BCBRange - Slide-in, Electric
AmanaAES3760BCSRange - Slide-in, Electric
AmanaAES3760BCS16Range - 30" SLIDE-IN ELECTRIC RANGE
AmanaAES3760BCWRange - Slide-in, Electric
Magic ChefCES3759BCBRange - Slide-in, Electric
Magic ChefCES3759BCSRange - Slide-in, Electric
Magic ChefCES3759BCWRange - Slide-in, Electric
WhirlpoolGY397LXUB0Range - Slide-in, Electric
WhirlpoolGY397LXUB02Range - Slide-in 30" Electric
WhirlpoolGY397LXUB03Range
WhirlpoolGY397LXUQ0Range - Slide-in, Electric
WhirlpoolGY397LXUQ03Range - Slide-in 30" Electric
WhirlpoolGY397LXUQ04Range
WhirlpoolGY397LXUS0Range - Slide-in, Electric
WhirlpoolGY397LXUS02Range - Slide-in 30" Electric
WhirlpoolGY397LXUS03Range
WhirlpoolGY397LXUT0Range - Slide-in, Electric
WhirlpoolGY397LXUT02Range - Slide-in 30" Electric
WhirlpoolGY397LXUT03Range - Slide-in 30" Electric
WhirlpoolISE630VS11Range - 30" Slide-in, Electric
WhirlpoolISE630WS00Range - 30" Slide-in, Electric
WhirlpoolISE630WS01Range
Jenn-AirJDS9860BDBRange
Jenn-AirJDS9860BDB21Range - 30" MODULAR GAS DOWNDRAFT RANGE