Bake Element WPW10310274 | Official Whirlpool Part | Fast Shipping | PartSelect
Bake Element – Part Number: WPW10310274
Bake Element – Part Number: WPW10310274 Bake Element – Part Number: WPW10310274 https://partselectcom.azureedge.net/Schematics/Maytag/59291.gif

Bake Element

Product Description

Bake Element Specifications

This bake element is found on the bottom of the oven. his bake element (part number WPW10310274) is for ranges. Bake element WPW10310274 is at the bottom of the oven and supplies the heat for baking. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Little to no heat when baking | Element will not heat | Oven not heating evenly

This part works with the following products:

Range.

This part works with the following brands:

Jenn-Air, Whirlpool, Maytag, Amana, Magic Chef.

Part # WPW10310274 replaces these:

74010883, 7406P439-60, W10310274.
Questions and Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 9 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Elaine from Orfordville, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WPW10310274
needed new element. Old one burnt in two
unscrewed and unplugged the old one and plugged in and screwed in the new one. EASY!
24 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Christopher from Daphne, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
WPW10310274
Bake element failed
Removed 2 screws holding element to stove then gently pulled element forward to exposed lead connections and disconnected leads to element then reconnected leads to new element and gently pushed element ends back into the openings in the back of the stove and replaced screws to hold element to stove
16 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Andrew from SAINT PAUL, MN
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WPW10310274
Lower range burner element burned out
Should have been under the 'very easy' category, unscrew 2 screws, pull out old element, disconnect wires, reconnect new wires and screw back in. Unfortunately the right wire disconnected while pulling out the element, so I had to pull the the stove out, disconnecting vents in the process, then remove the back to be able to feed the wire back in thru the element hole . While back here I noticed that the reason the wire came off is that the way it was routed behind the stove cover was such that there was virtually no slack to be able to pull the element out in the first place. I'll bet that at the factory, the element was installed first, THEN the wires were connected. Whoever was on the line that day made extra sure of no slack in back, and that made the job take 5-6 times longer than it should have. As for the part replacement, it was a perfect match to the original part so it was super easy once the wire got back in the oven...
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Ricky from JASPER, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPW10310274
My old element finally went out
Easy peasy...1. Take 2 screws out to remove the back cover. 2. Unplug the 2 wires from the element. 3. Remove the 2 screw holding the element from inside the oven and take out the old element. Repeat the steps above in reverse order.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Kevin from Norfolk, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPW10310274
Bake element blew up
took the old one out (two phillips head screws)and put the new one in. done. took about 5-6 minutes.
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
steve from mcminnville, OR
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPW10310274
element burn out
unplug and plug in new
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
svetlana from chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPW10310274
bake element needed replacement
replacement was very easy, took 5 min
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Desmona from GONZALES, LA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WPW10310274
Oven would not heat past 200
First be sure to unplug stove or turn off from breaker switch. I Removed racks from oven . Using screwdriver I loosened the back plate in the oven that held the wires connected to heating element , being careful not to let wires fall through holes . Gently pull element tip apart from wire. Snap end of new element to wires, screw plates back to tighten
Turn oven on and check to assure heating properly. Very simple
1 person found this instruction helpful.
Was this instruction helpful to you?
Lynn from MENOMONIE, WI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Parts Used:
WPW10310274
Burned out lower oven element replacement
SHUT OFF POWER AT BREAKER BOX! Remove oven door, use nut driver to remove two screws holding old element to back of oven. Pull forward to get wires into oven, remove wire clips from old part and re-attach to new element using pliers. Re-attach to back of oven, replace door. Turn on power and heat oven to burn off coating on new element. Not at all difficult, except for wire clips are at angle to wire, making re-attachment a bit difficult to do. DO NOT LOSE WIRES INTO BACK AS THEY WOULD BE VERY DIFFICULT TO RESCUE IN A JENN-AIR SLIDE IN UNIT LIKE OURS.
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
11 Reviews
4.9
out of 5
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11752540
Manufacturer Part Number: WPW10310274
Brand
Model Number
Description
Amana
AES1350BAW
Range - Slide-in, Electric
Amana
AES3540BAW
Range - Slide-in, Electric
Amana
AES3760BAB
Range - Slide-in, Electric
Amana
AES3760BAQ
Range - Slide-in, Electric
Amana
AES3760BAS
Range - Slide-in, Electric
Amana
AES3760BAW
Range - Slide-in, Electric
Amana
AES3760BCB
Range - Slide-in, Electric
Amana
AES3760BCS
Range - Slide-in, Electric
Amana
AES3760BCS16
Range - 30" SLIDE-IN ELECTRIC RANGE
Amana
AES3760BCW
Range - Slide-in, Electric
Magic Chef
CES3759BCB
Range - Slide-in, Electric
Magic Chef
CES3759BCS
Range - Slide-in, Electric
Magic Chef
CES3759BCW
Range - Slide-in, Electric
Whirlpool
GY397LXUB0
Range - Slide-in, Electric
Whirlpool
GY397LXUB02
Range - Slide-in 30" Electric
Whirlpool
GY397LXUB03
Range
Whirlpool
GY397LXUQ0
Range - Slide-in, Electric
Whirlpool
GY397LXUQ03
Range - Slide-in 30" Electric
Whirlpool
GY397LXUQ04
Range
Whirlpool
GY397LXUS0
Range - Slide-in, Electric
Whirlpool
GY397LXUS02
Range - Slide-in 30" Electric
Whirlpool
GY397LXUS03
Range
Whirlpool
GY397LXUT0
Range - Slide-in, Electric
Whirlpool
GY397LXUT02
Range - Slide-in 30" Electric
Whirlpool
GY397LXUT03
Range - Slide-in 30" Electric
Whirlpool
ISE630VS11
Range - 30" Slide-in, Electric
Whirlpool
ISE630WS00
Range - 30" Slide-in, Electric
Whirlpool
ISE630WS01
Range
Jenn-Air
JDS9860BDB
Range
Jenn-Air
JDS9860BDB21
Range - 30" MODULAR GAS DOWNDRAFT RANGE