This broil element is found on the roof of the oven.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when broiling | Element will not heat
This part works with the following products:
Wall Oven, Microwave Oven Combo, Range.
This part works with the following products:
Jenn-Air, Maytag, Amana.
Part# WPW10310260 replaces these:
71001637, 74004812, 7406P273-60, W10310260
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat
January 31, 2018
The roof element gets so hot it burns everything in a matter of minutes. It doesn't matter what the temperature setting is. Would this part correct it.
For model number JJW8530AAW
Hi Pat, Thank you for the question. I suggest replacing or testing the Long Oven Sensor, PartSelect Number PS1570174.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broiler would not heat
replaced broiler element - still would not heat. Called repairman and the control panel is out and will cost around 200.00 to replace. To replace the element, my son helped as my arms weren't long enough. Removed two screws at back and two screws on front of broiler brace. Pulled out and removed wires and hooked them to the new element. Had to turn off circuit breaker. Pushed element back into the holes and replaced screws. In this instance, it would have been cheaper had I just called the repairman first. However, I have an extra broiler element in case it goes out again.
Sandra from Oklahoma City, OK
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
10 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler blement failed
Sunday, four days before Thanksgiving, our oven would not bake properly. A quick check indicated the top element was not working. What to do? Where to get a part in time to fix for Thanksgiving dinner? The answer was easy - PartSelect. I had the part in my hands on Tuesday AM. Oven was fixed in 15 minutes and my wife was baking pies within an hour. All worked well and yes, we had a wonderful trukey dinner. Great service !
Donald from Hudson, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
8 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.2
Filter By Rating:
5 Stars
2
4 Stars
2
3 Stars
1
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tonja M - October 21, 2021
Verified Purchase
Fixed the problem
EZ order, fast delivery, helpful video. Oven is working again.
★★★★★
★★★★★
Evelyn D - December 26, 2020
Verified Purchase
Oven problem solved
The part arrived in great condition my son was able to install it with no problems. He wished it had contained new screws. Oven is working fine now.
★★★★★
★★★★★
Randall K - January 17, 2019
Verified Purchase
This was the exact part I needed
Easy repair and fairly quick shipping but the part was just put in a box without packing materials. The 2 support braces were slightly bent otherwise I would have given 5 stars.
★★★★★
★★★★★
Charles W - November 26, 2018
Verified Purchase
Broil Element Replacement
The ordering process went smoothly. Unfortunately the element was damaged in shipping and was bent upon arrival.
November 27, 2018
Hello,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
★★★★★
★★★★★
Judy R. M - October 3, 2018
Verified Purchase
Excatly the right part
Although the element was the correct one, to install it entailed taking the oven out of its built in cabinet. The oven is quite weighty, and we are really GLAD to have the project over. This is definitely one that we should have "hired out" due to the weight.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff