Maytag/Maytag_Thumb/53762.gif
See part 1 in the diagram
Replacing your Jenn-Air Wall Oven Bake Element play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Bake Element

★★★★★
★★★★★
10 Reviews

Rated by 8 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 113.25   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your MEW6530DDW!
 Fits your MEW6530DDW!
PartSelect Number PS11752537
Manufacturer Part Number WPW10310258
Manufactured by Whirlpool
Product Description

Bake Element Specifications

This bake element for your oven, range, or stove provides heat from the bottom of the appliance to cook or bake your food items. You may need to replace this part if your oven is not heating properly. This bake element is approximately 22 inches wide. Disconnect power to your appliance before completing the repair because you will be working near electrical wiring harnesses. The wiring harnesses feature slip-on terminals for easy installation. Be sure to hold the wiring harness forward so they do not fall behind the panel, as they are difficult to retrieve. This is an authentic OEM bake element.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat
This part works with the following products:
Wall Oven, Microwave Oven Combo.
This part works with the following products:
Jenn-Air, Maytag, Amana.
Part# WPW10310258 replaces these:
AP6019231, 71001638, 7406P271-60, W10310258
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
November 1, 2017
Bake does not work at all but broiler does. 21 ohoms for bake element. Clock control board works fine. What component defective? What is proper resistance for long oven sensor?
For model number Jmw9530caw
Hi Mike, Thank you for the question. if it is just the bake element not working I suggest replacing the element. If the sensor was defective the element would come on but would not keep the set temperature.The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Sue
November 9, 2019
I have a jenn air double wall oven. Problem I am having is only with bottom oven. My broiler element on bottom oven is working but not the baking element (lower element). So i ordered and replaced the bottom element with brand new one but it is still the same and element not heating. Everything else works fine except when on bake on only that part which causes the bottom oven to not work on bake mode cause only top element works. Please help, what else could it be??
For model number Model: JJW823ODDB Serial: 11608901EV
Hi Sue, please read this guide here: https://www.partselect.com/Repair/Range-Stove-Oven/No-Heat-When-Baking/ . Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Jenn-Air Wall Oven Bake Element

Replacing your Jenn-Air Wall Oven Bake Element play video
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 8 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
element started sparking and caught on fire
turned off breaker for oven,opened door, removed racks,removed two screws,pulled out the element, dis connected wires,reconnected new element,put back screws,replaced racks,turned breaker on,perfect fit.
  • AL from TINLEY PARK, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
22 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake Element failed
Removed 2 screws securing bake element, pulled element clear with wires still attached, then removed the wire push terminals. Attached terminals to new bake element and reinstalled. Extremely simple.
  • Terry from Bedminster, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom oven would not heat
When I removed the bottom bake element and tested it with an ohm meter, it was an open circuit. Once the new one arrived, I simply had to hook up the two leads, screw the cover back on the back of the oven and the job was done.
  • Jack from Seward, NE
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Low temperature replaced heating element
Took longer to turn off the power than replace the element ,, crazy the appliance company would charge $180.00 for a 3 minute job.
  • PAUL G from FAIR OAKS, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Elements went out in oven.
Shut off electricity to stove. Took out bolts, removed old element. Slide tabs out of connectors. Put new heating element in. Put bolts back in and turned electricity back on.
  • Kathy from WHITE HALL, AR
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bake element weakened in one spot and burned through
I removed two screws holding the element in place. Carefully pulled the element from its mounting throught insulation to expose the two wires connected by electric wire clips. I removed the clips and searched the part online using google. Part Select was provided as the top source. I ordered the part and it was delivered in two days. Taking care to thread the connection through the insulation, I was pleased to have installed it in about 5 minutes. All tools were still out and ready for use. Thank you for your service
  • Paul from Woodward, IA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The element, bake . broke when particure flamely split .
when I removed the element I notice that the terminal of the two wires they were verticale and the old part were about 15 degree upright, so I used player to bend the angle. it is working .Also let me say Part Select has wanderful service by phone and fast deliver.
Other Parts Used:
Broiler Pan (Large) Broiler Pan - Small
  • Ralth from Fairview, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven element
Took the screws out then unhooked the element then plugged in the new element put the plate back on turned the power back on and wala all done worked great.
Other Parts Used:
Drip Bowl - Chrome - 8 Inch Drip Bowl - 6 Inch
  • Julia from Towanda, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
5.0
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752537
Manufacturer Part Number: WPW10310258
Brand
Model Number
Description
Amana
ACB6260AB
Wall Oven - Built-in, Electric
Amana
ACB6260AS
Wall Oven - Built-in, Electric
Amana
ACB6260AW
Wall Oven - Built-in, Electric
Amana
ACB6280AS
Wall Oven - Built-in, Electric
Amana
AEW3530DDB
Wall Oven - Built-in, Electric
Amana
AEW3530DDS
Wall Oven - Built-in, Electric
Amana
AEW3530DDW
Wall Oven - Built-in, Electric
Amana
AEW3630DDB
Wall Oven - Built-in, Electric
Amana
AEW3630DDS
Wall Oven - Built-in, Electric
Amana
AEW3630DDW
Wall Oven - Built-in, Electric
Amana
AEW4530DDB
Wall Oven - Built-in, Electric
Amana
AEW4530DDQ
Wall Oven - Built-in, Electric
Amana
AEW4530DDS
Wall Oven - Built-in, Electric
Amana
AEW4530DDW
Wall Oven - Built-in, Electric
Amana
AEW4630DDB
Wall Oven - Built-in, Electric
Amana
AEW4630DDQ
Wall Oven - Built-in, Electric
Amana
AEW4630DDS
Wall Oven - Built-in, Electric
Amana
AEW4630DDW
Wall Oven - Built-in, Electric
Jenn-Air
JEW8530AAB
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW8530AAW
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW8530ACB
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW8530ACW
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW8630AAB
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW8630AAW
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW9530AAB
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW9530AAS
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW9530AAW
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW9530ACB
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW9530ACW
Wall Oven - Built-in, Electric, Wall
Jenn-Air
JEW9630AAB
Wall Oven - Built-in, Electric

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service