This bake element for your oven, range, or stove provides heat from the bottom of the appliance to cook or bake your food items. You may need to replace this part if your oven is not heating properly. This bake element is approximately 22 inches wide. Disconnect power to your appliance before completing the repair because you will be working near electrical wiring harnesses. The wiring harnesses feature slip-on terminals for easy installation. Be sure to hold the wiring harness forward so they do not fall behind the panel, as they are difficult to retrieve. This is an authentic OEM bake element.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat
This part works with the following products:
Wall Oven, Microwave Oven Combo.
This part works with the following products:
Jenn-Air, Maytag, Amana.
Part# WPW10310258 replaces these:
AP6019231, 71001638, 7406P271-60, W10310258
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
November 1, 2017
Bake does not work at all but broiler does. 21 ohoms for bake element. Clock control board works fine. What component defective? What is proper resistance for long oven sensor?
For model number Jmw9530caw
Hi Mike, Thank you for the question. if it is just the bake element not working I suggest replacing the element. If the sensor was defective the element would come on but would not keep the set temperature.The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Sue
November 9, 2019
I have a jenn air double wall oven. Problem I am having is only with bottom oven. My broiler element on bottom oven is working but not the baking element (lower element). So i ordered and replaced the bottom element with brand new one but it is still the same and element not heating. Everything else works fine except when on bake on only that part which causes the bottom oven to not work on bake mode cause only top element works. Please help, what else could it be??
For model number Model: JJW823ODDB Serial: 11608901EV
Hi Sue, please read this guide here: https://www.partselect.com/Repair/Range-Stove-Oven/No-Heat-When-Baking/ . Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Marc
March 6, 2023
Need bake element
For model number J8R8885QCS
Hello Marc, thank you for reaching out. The bake element, part number PS11751723, is compatible with your model. We hope this information is useful!
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Jenn-Air Wall Oven Bake Element
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
element started sparking and caught on fire
turned off breaker for oven,opened door, removed racks,removed two screws,pulled out the element, dis connected wires,reconnected new element,put back screws,replaced racks,turned breaker on,perfect fit.
AL from TINLEY PARK, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
22 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake Element failed
Removed 2 screws securing bake element, pulled element clear with wires still attached, then removed the wire push terminals. Attached terminals to new bake element and reinstalled. Extremely simple.
Terry from Bedminster, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom oven would not heat
When I removed the bottom bake element and tested it with an ohm meter, it was an open circuit. Once the new one arrived, I simply had to hook up the two leads, screw the cover back on the back of the oven and the job was done.
Jack from Seward, NE
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Low temperature replaced heating element
Took longer to turn off the power than replace the element ,, crazy the appliance company would charge $180.00 for a 3 minute job.
PAUL G from FAIR OAKS, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Elements went out in oven.
Shut off electricity to stove. Took out bolts, removed old element. Slide tabs out of connectors. Put new heating element in. Put bolts back in and turned electricity back on.
Kathy from WHITE HALL, AR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bake element weakened in one spot and burned through
I removed two screws holding the element in place. Carefully pulled the element from its mounting throught insulation to expose the two wires connected by electric wire clips. I removed the clips and searched the part online using google. Part Select was provided as the top source. I ordered the part and it was delivered in two days. Taking care to thread the connection through the insulation, I was pleased to have installed it in about 5 minutes. All tools were still out and ready for use. Thank you for your service
Paul from Woodward, IA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The element, bake . broke when particure flamely split .
when I removed the element I notice that the terminal of the two wires they were verticale and the old part were about 15 degree upright, so I used player to bend the angle. it is working .Also let me say Part Select has wanderful service by phone and fast deliver.
Took the screws out then unhooked the element then plugged in the new element put the plate back on turned the power back on and wala all done worked great.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David W - March 24, 2021
Verified Purchase
So simple
For us who are home repair “task challenged”, this was a no-brainer. Like other reviewers have mentioned; right part, fast delivery & easy to install (really easy)! Watched the video, but probably could have done it even without some degree of visual assistance.
★★★★★
★★★★★
Ricky L - August 25, 2020
Verified Purchase
Easy installation
Perfect fit, easy installation
★★★★★
★★★★★
Frank M - May 29, 2020
Verified Purchase
prompt shipping, exact part
Had never replaced an element on an oven before but turned out to be easy enough.
★★★★★
★★★★★
Patrick F - May 29, 2020
Verified Purchase
Appreciated the installation video. 100% right.
F*ckin' fixed it at a nice price with prompt delivery. No RAGRETS! Not even one letter.
★★★★★
★★★★★
Glenn P - March 27, 2020
Verified Purchase
Exact Part needed for repair
The video on how to replace the bake element made it really easy to do. Part arrived quickly.
★★★★★
★★★★★
Fred L - April 26, 2019
Verified Purchase
very easy repair. remove two screws remove old part, insert new part, replace two screws and done.
The part arrived sooner than expecter.
★★★★★
★★★★★
Lyle D - April 26, 2019
Verified Purchase
Easy repair job with the correct part
Part was received on time without any issues. Installed and appliance is back in good working order
★★★★★
★★★★★
Ionut B - December 10, 2018
Verified Purchase
Excellent service, Easy repair
Fast shipping, the item arrived on time and in perfect condition. The oven works great again!
★★★★★
★★★★★
Michael M - June 23, 2018
Verified Purchase
Timely delivery, correct item and installed easily
Easy replacement, cut power to unit, remove oven racks, two screws and easy wire connectors. Novice level repair
★★★★★
★★★★★
Con H - February 22, 2018
Verified Purchase
Fast Delivery
analysis by A&E was wrong. New elements were not the problem.Parts did arrive quickly
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11752537
Manufacturer Part Number: WPW10310258
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
