This electronic board manages and monitors the cooling and defrost times of your refrigerator and other functions. If your refrigerator is not cooling properly because the dispenser is flapping between open or closed positions, or there are problems with the display lights flashing, replacing your control board can be the solution. Remember to unplug your refrigerator from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for installation instructions and accurate guidance.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dale B - January 21, 2019
Verified Purchase
Part works well
The challenge was in programming the part, which none of the technicians where I live understood. After speaking with Whirlpool, I learned how to do it and successfully put in the part.
Customer service was a big help. Thank you Matthew!
★★★★★
★★★★★
Kathy A - March 25, 2018
Verified Purchase
Replacement part works exactly as expected
The part arrived at the designated time and was not damaged. We replaced the control board in a matter of minutes, programmed the refrigerator and it’s been working perfectly so far. Very pleased with the product.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Key pad for ice and water was just cycling and then after several days, stopped
Watched online video that demonstrated how to remove old, install new, and how to set correct code.
Prepped with correct tools, and general screwdriver set. Took socks off so I limited my self collecting static electricity. Removed back panel and took a picture of the position. Once removed, I touched the refrigerator
... Read more, before touching new piece and installed new panel.
Read less
Michael from MOUNT GILEAD, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Circuit Board Bad
Went to You Tube - found how to change out - the only problem I had was programming the new circuit board. Went to Maytag site and found out how to reprogram in a step by step instruction and it worked.
John from JACKSBORO, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
High Voltage board was bad
Once I realized the High voltage Board was bad I ordered the new High voltage board from Parts Select, the part was in stock and was delivered to my house in two days, I opened the box, and the instructions were very clear how to install the new high voltage board and program the board with the code for my refrigerator. There are also vid
... Read moreeos on You Tube on how to program the code on the refrigerator in case you have difficulty. In all, the problem was fixed and the refrigerator was up and running. Thank You Parts Select.
Read less
Robert from PALM COAST, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator quit except for the light inside.
Removed the metal cover over the HV electronic board on the back of the unit. Using a flat head screwdriver I unsnapped the plastic cover and removed it. I unplugged the 5 or 6 cables from the electronic board. Bent back the plastic tabs holding the board. You might think they are going to break but they bend. I lifted the board out and r
... Read moreeplaced it with the new one. Then plugged the cables in being careful to align them first. I then applied power and the refrigerator came to life. I followed the programming instructions that came with the refrigerator. You can get those online also. The unit began to run and in a few minutes the compressor came on. The unit began cooling and life was good again!
Read less
Roy from BARTLETT, TN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
19 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no cooling in refrigerator...freezer okay
Replaced the control board. Called another web site and for $15 got the twelve step code to set the new control board.
Still no cooling. Same issue as before.
Sears coming again tomorrow to try again.
Michael from Village of Lakewood, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
36 of 103 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
29 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
August 27, 2019
Inside lights work nothing running. When button is pushed on front all board lights come on but all go off when released. When lever for ice or water pushed all lights come on and alarm goes sounds.
For model number MF12269VEW1
Good Day Robert. Thank you for your question in regards to your unit (Model Number MF12269VEW1). Based on our research you may need to replace the following part in your unit: Part Number WPW10310240. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
17 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
March 21, 2018
My fridge is not working at all replaced circuit board the thermostat and starter device my screen on the front shows pe0 000 when i push the up and down button to the right the last 3 0s switch between ice and h2o any suggestions
For model number MFI2569VEM2
Hello Michael, thank you for your question. If the main board has been replaced and is showing the P0000 error code, the board has to be programmed. The Program Code is usually located on the Serial number Plate on the unit, after the word Code. Check your owners manual for the programming process once you have this code! I hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
William
October 27, 2017
Outside display,compressor nor fans coming on .Only the inside light working.Would board be the fix?
For model number mfi2569vem2
Hi William,
Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the compressor start relay, the temperature control thermostat, the electronic control board, the compressor and the thermistor. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Yves
August 1, 2019
My refridgerator is to cold won’t respond to temp control
For model number 5967853801
Hi Yves, thank you for your question. When you are having temperature problems in your fridge, there are a few parts that could cause the issue. You can use a multi meter to test most of the parts. Make sure you cut power to your appliance before doing any repairs or tests. First you should test your defrost thermostat. Place the thermostat in ice cold water for 2-3 minutes after removing it from your appliance. It should be reading 0 ohms to be working correctly. Another part to check would be your defrost heater. Remove it from the appliance. It should be reading anywhere between 0 - 50 ohms to be working. You could check your temperature sensor. To find the correct reading for this part you will have to refer to your tech sheet that comes with your appliance. You can usually find this tech sheet behind the bottom grille of your fridge on either the right or left side. These are the most common parts that cause this issue in your appliance. So it is suggested you check them first. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Melinda
December 26, 2017
The inside lights aren't working and the door alarm light is blinking. What is causing this?
For model number GI5SVAXVQ00
Hi Melinda, Thank you for your question. It is suggested that you unplug your appliance for about 5 minutes. When you plug your appliance back in that should reset your board. If you are still experiencing a problem, you may have a loose wire connection or you may have to replace your control board. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
January 13, 2020
The display lights up and shuts down. When it does this the refrigerator starts to work and shuts down.
For model number MF12269VEM
Hi Mike,
Thank you for your question. If the display lights up and then the refrigerator shuts down a few minutes later, there are some parts that you will need to check to see which one is causing the issue. You will need to check the evaporator fan motor, the damper control assembly, the thermistor, the temperature control board, the defrost thermostat and the main electronic control board. You will also need to check to see if the evaporator coils are frosted over as this can also cause the refrigerator shut down after a few minutes. We hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Thomas
December 27, 2017
The front control panel is blank when i touch any button the led's light up and the displays show 8888. If i disconnect power to the control panel on the door and reconnect it the ice maker flapper cycles. The refrigerator and the freezer are not staying cold and not running.
For model number GI5SVAXVB02
Hi Thomas,
Thank you for your question. If the display on the dispenser control board with touchpad is not responding, then you will need to use a multimeter to check the continuity of the touchpad, the dispenser electronic control board and the wiring connections between the 2 parts. You will also need to check the main electronic control board for the refrigerator as well to see if it is working correctly. If the refrigerator and freezer section are too warm I would also check the the capacitor and the thermistor. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Will
October 11, 2017
I have a Maytag refrigerator model#mfi2569vem serial #10672341nj. The entire unit is not cooling (freezer and refrigerator). The control panel on the outside still works. The lights on the inside still work. Is this the right part for the fix?
For model number WPW10310240
Hi Will,
Thank you for your inquiry. If the refrigerator and freezer sections are not cooling then you will need to replace the capacitor, part number PS11757023. This part fixes the issue 99% of the time. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Willy
November 20, 2018
Hello. I have a jfi2089aep jenn air that’s over cooling in the fresh food section. The bottom freezer is fine as far as cooling and defrost. But the top fresh food compartment goes as low as 15f. I noticed that the damper assembly stays continually open, letting cold air from the freezer in the fresh food area, so i replaced the replaced the damper and eventually the whole ice maker/fan/damper assembly. But the temperature in the fresh food section is still very low and the damper seems to stay opened all the time. Also, occasionally a “65f fresh food Max temp” flashes on the control panel until i press a button and it goes away for a minute before returning. So i replaced the fresh food thermistor but to no effect. Can you help? Thanks
For model number jfi2089aep
Hi Willy,
Thank you for your question. If the refrigerator is too cold and you have already replaced the damper, you will need to check the thermistor. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Sandra
December 11, 2018
Ice dispenser door opening and shutting and lights on display panel flashing. Unable to set controls. Unplugged and plugged in doing the same
For model number af12538aes
Hello Sandra, Thank you for the question. This sounds like an issue with the Low Voltage Dispenser Control Board, PartSelect Number PS2069839 in the dispenser controls. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!