Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lennis L - July 14, 2018
Verified Purchase
washing Machine Knob ,
washing Machine Knob , and switch something fell of shelf and broke them both off , I was surprised that they had them in stock and got them faster then the date they said it would get here , 5 Stars , thanks
★★★★★
★★★★★
Oscar H - April 25, 2021
Verified Purchase
Great
Wonderful
★★★★★
★★★★★
Javier R - February 7, 2020
Verified Purchase
Does not fully work.
I only get warm water whether set on cold or hot. Shut off valves are fully open.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
March 27, 2018
The washing machine will not advance past the wash cycle. Not sure if the timer is bad. What part/parts would be needed to correct the problem? Thank you
For model number WTW4800BQ1
Hi Chris, Thank you for the question. If the appliance is not advancing, I suggest replacing the timer switch. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Brad
April 23, 2018
I have a unit that doesn't stop the spin cycle. I assume is a timer but i'm told (haven't been to look at the machine yet) there's only buttons on the unit no dial.
For model number WTW4815EW1
Hi Brad,
Thank you for your question. Your washer does not have a timer but an electronic control board. You will need to test the board with a multimeter to see if it is working correctly and you will need to test the switches as well. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Roger
March 6, 2020
Why will the washer only operate in gentle cycle?
For model number 110.20022012
Good Day Roger. Thank you for your question in regards to your unit (Model Number 110.20022012). Based on our research, this may be the result of the Wiring Harness (PartSelect Number PS11752330) being damaged/faulty and needing to be replaced. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
The grey button is intact, but the actual starter underneath will not connect at times. What part do I need?
For model number WTW4815EW1
Hi Benita,
Thank you for your question. If you are referring to the large knob that is second from the right on your control panel, than the part that you will need to replace is the electronic control board. The part number listed under your model number for the electronic control board is PS12347391. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Benita
November 6, 2019
The small grey button that reads start/pause is functioning fine. However, we think the actual starter that runs the machine is starting to fail but we can't figure out which part # it is.
For model number WTW4815EW1
Hello Benita and thanks for writing.
We if your small button (part # PS11746209) is working fine your problem may be with another part. Can you describe the symptoms that makes you believe there is a problem starting your washer? Looking forward to your reply please always include your model number. Hope this helps. Please contact us anytime.
The agitator randomly works on regular, heavy duty, and gentle cycles. No problem with the spin cycle, or the water level. I am wondering if it is the control panel, or the timer? Any ideas??
For model number MVWC200XW2
Hi Frances, thank you for your question! We have researched and found that the issue is with the agitator dogs, part number PS388034. It ratchets across the gear teeth in one direction and digs into the gear teeth in the opposite direction to create the agitation. You may need to replace it to fix the issue. We hope this solves your problem!
I am on well water and my washing machine works only on warm and hot water. It seems I can’t get enough cold water to do a load.
For model number WTW4800BQ1
Hello Barb, thank you for getting in touch. According to our research, the issue is most probably with the water inlet valve, part number PS11757114. You may need to replace it to fix the issue. We hope this sorts out your problem!
The washer stops in the spin cycle and I have to cancel the cycle and select Drain&Spin to get the spin cycle to start. Any ideas why this is happening, is this a common known issue?
For model number MVWC465HW3
Hi Kevin,
Thank you for your question. If the washer will not spin during the spin cycle, the issue may be with the drive hub kit or the clutch assembly. The drive hub kit connects the the spin basket to the spin shaft that spins the basket. The drive pulley or clutch assembly locks the transmission input shaft to the wash basket drive during a spin cycle. For both of these parts you will need to visually inspect them for signs of burning, damage and wear. If these parts show any of these signs, they will need to be replaced. We hope this helps!
I will do a load of laundry or 2 and then I try to do another load, I push the button and it won't start. I then wait some times for a couple hours or some times until the next day and it will work? Any suggestions what the problem might be? Thanks for any help
For model number MVWC360AW0
Hello Sherry, thank you for your inquiry. The washer might be overheating after a couple of loads and needs time to cool down before it can start again. Ensure that the machine has proper ventilation and is not placed in a confined space. If that is not the case, the issue can be with the control board, part number PS4704838. You may need to replace it to solve the problem. We hope this helps!
I have a push starter on my Kenmore washer. The gray button is in tact but the actual starter underneath will not connect therefore, the machine will not start. What part do i need? How shall i replace?
For model number 11021102012 type587-08
Hi Nancy, thank you for your question. You would have to replace your electronic control board. Unfortunately we do not have manufacturer instructions on how to replace this part. Generally you would have to open up the back of your control panel. One thing that you can do when replacing a control board is take a picture of your old part wired up so that you have reference to where the wires go. Also once you remove one wire from a spot on your old part, immediately taking it and putting it on your new part in the same place. I hope that helps. Good luck with your repair.
