Replacing your Whirlpool Dishwasher Electronic Control Board
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Maytag, Kenmore, KitchenAid.
Part# WPW10285180 replaces these:
AP6018711, W10130967, W10208673, W10285180
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don
January 14, 2020
I’m having trouble with the start button all the other ones work but that one! Do i have to replace the whole control unit?
For model number GU3200XTXY1
Hello Don and thank you for writing.
It certainly sounds like it could be a faulty control panel (white ) PS11752108, you should check for signs of damage, and replace if necessary. We hope this helps. If you need a different color let us know and we will try to find it for you. Please contact us anytime if you require further assistance.
Hello Charles, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the appliance. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charles
September 21, 2023
Normal wash cycle light is flashing. I assume this is some kind of fault code, but I don’t have a clue what the fault is. Any help would be appreciated.
Thanks
For model number KUDL031VWH3
Hello Charles, thank you for your inquiry. It means that the normal button is shorted or held for more than 17 seconds. Try to unplug the dishwasher and heat up the touchpad with a hair dryer. Then rub your thumb over the normal button to try to unstick it. Allow it to cool and then re-apply power. Now if it still acts up you will need to replace the control panel, part number PS11751093. Good luck with this repair!
Some of the lights on the control panel come on and some do not. What part do I need to repair my dishwasher?
For model number MDBH949AWB1
Hello Helene,
Thanks for your question. Be sure to check if there is an error code being indicated by the flashing lights. Each error code may have a unique solution to implement. If no error code is present, it may be worth checking your control panel. Part number PS11722974 for the black panel, part number PS11722976 for the white panel, and part number PS11722977 for the biscuit pannel. If the buttons are not working on them, it may be worth replacing the control panel.
I hope this helps.
All power buttons work but when you press the start button, the dishwasher fails to start. Which part do I need to replace? The Cancel/Drain button works and drains the dishwasher. Your response would be appreciated. Thanks.
For model number GU2275XTVY1
Hello Sohan, Thank you for the question. We suggest testing the Door Latch switches for continuity. If the Latch has failed, the controls will not let the appliance start the wash cycle. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
My dishwasher buttons are not working - no lights nothing - its just dead. I tried replacing the bimetal fuse but no luck - i tested the door switch and the fuse etc they seems to be working fine. What else could be the problem? Do I need to replace the circuit board?
For model number 66513213K901
Hello Deepak, thank you for contacting us. The issue is probably because of a faulty control board, part number PS11752013. You can check the board with a multimeter to confirm the fault. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Sherry
January 18, 2023
When the dishwasher is done is the light on the start button suppose to be lit up i have to hit cancel when its all done
For model number DU1300XTVT5
Hi Sherry, thank you for contacting us. According to our research, cycle status indicators help you to follow the progress of your dishwasher cycle. The clean indicator glows when the cycle is finished. You need to check the following parts to fix the issue: the door latch, part number PS886319, the door switch, part number PS11745501, the turbidity sensor, part number PS11757214, and the electronic control board, part number PS11752013. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
replaced main board some lights light, adapt wash lights-soak and scour-heat dry, no start light ou no other lights.
For model number GU2275XTVB1
Hello Robert, thank you for contacting us. According to our research, if you have replaced the main control board and still facing the problem, then the issue is most probably with the touchpad and control panel, part number PS11749577. We would recommend replacing it. We hope this information helps!
