Maytag/Maytag_Thumb/55500.gif
See part 6 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Bake Element - 3600W

★★★★★
★★★★★
24 Reviews
$ 103.53   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11751723
Manufacturer Part Number WPW10276482
Manufactured by Whirlpool
Product Description

Bake Element - 3600W Specifications

This bake element is found on the bottom of the oven. This bake element is for ranges. The bake element is at the bottom of the oven and supplies the heat for baking. Unplug the range or shut off the house circuit breaker before installing the part

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly
This part works with the following products:
Range.
This part works with the following products:
Maytag, Amana, KitchenAid, Jenn-Air.
Part# WPW10276482 replaces these:
AP6018421, 74008693, 74011117, 7406P451-60, W10144689, W10276482
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

10 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    SAADIA
    March 7, 2019
    What bottom oven range will work with my oven?
    For model number MER5765RAS
    Hello Saadia, thank you for your question. The bake element for your unit is PartSelect Number: PS11751723. Please enter the part number into the site for current price and availability. Good luck with your repair!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Samantha
    December 19, 2019
    I am in need of a bottom bake element for my Whirlpool oven. Ztsm 240v 3600w l360at are the numbers on my broken element.
    For model number YWEE730H0DS0
    Hi Samantha, Thank you for your question. The part number listed under your model number for the bake element is PS11703285. We hope this helps. Thank you and have a great day!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Teresa
    January 13, 2020
    Oven temperature 75 to 100 degrees hotter than setting. I replaced the long oven sensor and did not fix the problem. Anything else i can try?
    For model number JER8885QAS
    Hello Teresa and thank you for writing. It certainly sounds like it could be a faulty infinite switch PS11744486 and/or faulty bake element, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime if you require further assistance.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Mercer
    April 8, 2019
    Part number upper element that broils.
    For model number KERS205TSS0
    Hello Mercer, thank you for contacting us. The Broil Element for your model is part PS11744522.

    Was this helpful?
    Thank you for voting!
    Julie
    October 18, 2019
    What part number will work for this model, bottom oven heating element? Thanks
    For model number Mer577qas
    Hi Julie, I am assuming you are referring to a model MER5775QAS. The bottom element is bake element part number PS11751723. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Melody
    September 10, 2019
    Hi, what is the baking element for model aer5715rcs? Thanks!
    For model number AER5715RCS
    Hi Melody, the correct baking element for model AER5715RCS is WPW10276482. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Janet
    October 14, 2019
    I am looking to replace the oven element. The one i’ve found that looks like the one i have, wpw10276482, states that it is for the bottom of the oven. My element is at the top. Will this be appropriate? Maytag self cleaning True convection range. Thanks
    For model number YMER8875WW
    Hello Janet, thank you for inquiring. The top element is the Broil Element. The replacement for your model is part number PS11744522. Good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Dan
    April 15, 2018
    What baking element do I need?
    For model number MER5775RAB
    Hello Dan, Thanks for your question. The bake element you will need is part number PS11751723. I hope this helps.

    Was this helpful?
    Thank you for voting!
    Jay
    August 2, 2018
    I have Amana aer5845qas electric stove, cooktop everything is working fine. However, when oven is set to bake, it will beep once and stops, no heat. I tested the temperature sensor and the heating element with multi meter, both appear to be fine with the proper resistance. What else could be wrong? Thank you.
    For model number AER5845QAS
    Hi Jay, Thank you for your question. If you have tested both the electronic control board and the oven sensor, that are some other parts that you will need to check to see which ones are causing the issue. You will also need to check the bake element, the terminal block and the wiring between the parts to verify what is causing the issue. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Nick
    January 7, 2019
    What heating element would i need for my model?Thank you, nick
    For model number MERS755RAW
    Hello Nick, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS11744252 for the top broil element and Part Number: PS11751723 for the bottom bake element. Hope this helps, good luck with this repair!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 4.3 / 5.0, 27 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Oven wouldn't get hot enough
      First and MOST IMPORTANTLY, I located the breaker switch for my oven and turned it off. I verified this by noticing that the electric clock on the oven display was no longer powered.

      After removing all the oven racks, I removed the two screws at the bottom of the back end of the oven holding the metal "floor" in place.

      Removing the "floor" cover exposed the old heating element and I was able to quickly identify the corrosion of the old heating element which caused it break.

      I unscrewed the two screws attaching the heating element to the bottom of the oven, then there was another screw attaching the back of the heating element to the back wall of the oven.

      I had to pull the element towards me with a decent amount of force. This is the "quick and dirty" way of getting the job done, because I didn't want to have to find a way to pull my entire oven out from the wall of my kitchen in order to gain access to the back panel. Eventually with enough pulling, the two wires came through the holes with the gator clips still attached to the element (good! it would not have been fun if one of those came off too soon). Incidentally, a bit of fiberglass insulation also came through the holes. It didn't seem to be a big deal, I just discarded the fluff.

      I detached the gator clips from the old heating element and removed it. It had a fair amount of black carbon residue (I assume) so you might want to wear gloves for this part or at least have a paper towel handy to clean your hands up.

      Just follow the same directions in reverse the get the new element in. Hook up the gator clips, shove them through the two holes in the back of the oven, remount all the screws, remount the oven "flooring" and screw it back in. Before replacing the flooring, you may want to try turning on your oven to ensure it gives a nice pretty orange glow. Of course don't forget to let it cool down before proceeding, if you do that!

      Don't think you have to be an expert to do this one. I was able to diagnose and fix this problem without any prior oven repair situations under my belt.
      • Shawn from Atlantic Highlands, NJ
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPW10276482
      125 of 136 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven would not heat up past 225 degrees
      Unplug the oven.

      While you are back there, open the small access panel in the back, bottom center, by remoing one phillips head screw.

      You'll see where the power cord is tied into the appliance, and above that there are two connectors attached to the two contacts on the element. These slide off. (Make sure the oven is unplugged or you'll electrocute yourself at which point fixing the oven is proably not a priority.)

      Open the oven door and remove the oven racks.

      There are two Pan-head Phillips screws securing the the base cover in the bottom of the oven cabinet. (Near the rear of the cabinet) There is a lip at the front edge, so after removing these screws you need to lift the panel up from the back , then turn the panel slightly (at an angle) to remove it; this exposes the element in the base of the cabinet.

      There are two or three phillips screws holding the element into the base of the cabinet nearer the oven door--they drive through a small steel bracket attached to the element, and are difficult to miss.

      There is one more screw on the back wall of the cabinet were the element exits out to the contacts you disconnected while not electrocuting yourself. Once you remove this screw the element slides right out.

      Reverse the process to install the new one.

      Final note: The bad element was eating itself; this occurs--apparently--when the oven is on and someone leaves the door open for an extended period of time. My suggestion, with Maytag's at least, is to make sure your furnace does not breakdown late on a sunday when it is extremely cold. If you need to heat the house with your oven--which I am not recommending--order a replacement element from Part Select that day, as you will need to replace it if you don't want your wife to have to cook thanksgiving dinner in the neighbors kitchen.

      It took me less time to fix, that to explain how I did it.
      • Steve from Merrimack, NH
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPW10276482
      47 of 51 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Burned out Heating Element
      First I turned off the breaker for the oven. Next I pulled the oven out so I could access the back of the oven. Then I removed the back of the oven so that the connections for the heating element were exposed. I disconnected the wires from the element and then went back to the front of the oven. I removed the plate over the heating element (2 screws in the back) and then removed the screws that were holding the element in place. I pulled out the heating element and then put the new one in. Finally I hooked up the element to the electrical supply and then put everything back together. Don't forget to turn the breaker back on!
      • Daniel from Fort Mill, SC
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPW10276482
      12 of 14 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The heating element for the oven section was luke warm even when the control was turned up high.
      I wasn't sure if it was the heating element or the temperature probe not allowing the oven to go above 200 degrees so I ordered both from Selectparts. After receiving my replacement parts (in record time thank you) the oven element had a hidden slit on the underside near the connection. During its removal the element disintegrated at that point.

      Since Maytag is very user friendly to maintain, it was a matter of removing the retaining nuts securing the element to the back of the oven, and resecuring after replacing with the new element. I did have to take the back panel off the oven to reattach the wiring to the element. This was necessary because while I was removing and replacing the element, the insulation was pulled through the access holes. I also replaced the temperature probe because I had already ordered it. This was easier to replace however and I did not encounter the isulation problem as I had when removing/replacing the element. I recommended your company to my friends and would definately order parts from you should I need to repair another appliance in the future. Thank you again.
      • lawrence from Laurel, MD
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WPW10276482, 12001656
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven would not heat on bake setting
      unplugged oven from wall. Removed screws holding the inside element cover. Then removed the screws holding the element in place. disconnected wire from element. plug in new element and reinstall all screws and covers in reverse order. If wire to element pull throug back of oven, remove rear cover to expose all electrial connections. With new element screwed in place you can plug it in from the back. Reinstall rear cover. Plug in oven and test.
      • Cynnde from Fairbanks, AK
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPW10276482, WP74003976
      6 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven tempature would not exceed 165 degrees.
      Purchased new bake element from PartsSelect. Very easy to install, unplug range, remove 6 screws, slide element out and unplug end, remove old element. Reverse procedure to install new element. My range was about 6 years old and in excellent condition, was considering buying a new range. Found PartsSelect on-line and ordered new element. Their website is very easy to use and find correct parts.
      Saved lots of dollars, this PartsSelect website and service is great.
      • Michael from Torrington, CT
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPW10276482
      5 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven not heating pass 125, heating element not working
      First I removed the screw behind the stove that hides the electrical wires. Pull off the two wires connecting the bake element with pliers. Unscrew the two screws holding down the floor pan which covers the baking element and pull out the floor pan. Here you will see the baking element, it is attached with a few screws. Remove the baking element and attach the new the same way.
      We could not believe how easy this repair was to do. Not to mention all the money we saved on a repair man.
      Thank you partselect.com, I'm glad I researched this on the net.
      • Damaris from Ocala, FL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WPW10276482
      4 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Oven would heat in Bake mode
      Turn off breaker to oven and verify no power.
      Remove the two screws holding metal panel covering baking element on the floor of the oven (near back of inside of oven)
      Remove two screws holding element mount to floor of oven (near front of inside of oven).
      Remove single screw holding element to back wall of oven.
      Pull element toward front of oven, carefully holding wires so they do not disconnect from element and slip inside the ovenback wall.
      When you can reach the wire connections, hold each one with a pair of pliers and disconnect from element ends.
      Connect new element ends into wire connections. Be sure to insert all the way into both connectors.
      Carefully, push the wires back into the rear of the oven, trying not to scrape the wires on the sheet metal.
      When fully inserted, reinstall single screw to secure element to back wall.
      Re-install two screws to element mounting at the front of the oven floor.
      Re-install two screws to secure element cover plate to the floor of the oven.
      Turn on breaker for oven and verify oven has power.
      Turn on oven to bake at 400 degrees.
      Wait for oven to come up to temp and maintain for 10-15 min (you may smell some burning smells as the element heats up the first time).
      Enjoy...
      • Jon from Liberty Twp, OH
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        WPW10276482
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Bake element went out
      First I removed the two wires from the back of the stove. I then removed the two screws that were holding the element in place. Installed the new one without problems
      • Jeff from Vancouver, WA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPW10276482
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      oven only got to to 170 degrees
      The bake element in this oven is covered by a tray but after locating the screws for that and removing I could see the element was burnt so I just removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...) then just reversed the procedure to install. Don't forget to unplug the unit first.
      • ROBERT from FEEDING HILLS, MA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WPW10276482
      3 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      24 Reviews
      4.9
      Filter By Rating:
      • 5 Stars
        22
      • 4 Stars
        2
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11751723
      Manufacturer Part Number: WPW10276482
      Brand
      Model Number
      Description
      Amana
      AER5515QAQ
      Range - Freestanding, Electric
      Amana
      AER5515QAW
      Range - Freestanding, Electric
      Amana
      AER5515QCW
      Range - Freestanding, Electric
      Amana
      AER5515RCW
      Range - Freestanding, Electric
      Amana
      AER5715QAQ
      Range - Freestanding, Electric
      Amana
      AER5715QAS
      Range - Freestanding, Electric
      Amana
      AER5715QAW
      Range - Freestanding, Electric
      Amana
      AER5715QCB
      Range - Freestanding, Electric
      Amana
      AER5715QCS
      Range - Freestanding, Electric
      Amana
      AER5715QCW
      Range - Freestanding, Electric
      Amana
      AER5715RCB
      Range - Freestanding, Electric
      Amana
      AER5715RCS
      Range - Freestanding, Electric
      Amana
      AER5715RCW
      Range - Freestanding, Electric
      Amana
      AER5725QAF
      Range - Freestanding, Electric
      Amana
      AER5725QAN
      Range - Freestanding, Electric
      Amana
      AER5725QAQ
      Range - Freestanding, Electric
      Amana
      AER5725QAW
      Range - Freestanding, Electric
      Amana
      AER5735QAB
      Range - Freestanding, Electric
      Amana
      AER5735QAF
      Range - Freestanding, Electric
      Amana
      AER5735QAN
      Range - Freestanding, Electric
      Amana
      AER5735QAQ
      Range - Freestanding, Electric
      Amana
      AER5735QAS
      Range - Freestanding, Electric
      Amana
      AER5735QAW
      Range - Freestanding, Electric
      Amana
      AER5815RCB
      Range - Freestanding, Electric
      Amana
      AER5815RCS
      Range - Freestanding, Electric
      Amana
      AER5815RCW
      Range - Freestanding, Electric
      Amana
      AER5845QAB
      Range - Freestanding, Electric
      Amana
      AER5845QAF
      Range - Freestanding, Electric
      Amana
      AER5845QAF17
      Range - 30" ELECTRIC FREESTANDING RANGE
      Amana
      AER5845QAN
      Range - Freestanding, Electric

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service