Plastic side-rail cracked. Shelf could no longer support weight on top or in the drawer beneath.
(1) Remove the drawer by pulling it open until it catches. Push up gently on the bottom-rear of the drawer to lift it over the stop tabs in the drawer rail, and pull the drawer out completely. Note: You will need to push the refrigerator door gently to the fully open position to remove the drawer all the way. The door will open about 30 d
... Read moreegrees further than where it comes to rest on its own when opened. (2) Remove the shelf by lifting gently on the front and sliding it forward. Once the rear corners of the shelf are beyond the upper lip of the shelf rail, you can lift the shelf out of the rail, and turn it vertical to remove through the fridge door. Note: the glass in the shelf is meant to stay in, but if its old or damaged it may tip out when you turn the shelf on its side. So you may want to tape it in place before removing the shelf. (3) Install the new shelf by repeating step 2 in reverse. (4) Reinstall the drawer by repeating step 1 in reverse.
Read less
J from BOSTON, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf for snack drawer
Slide drawer in and fit perfectly.
Kay from LA CRESCENTA, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
motor was turning but no ice came out
took 4 screws out holding back cover of motor and un plug plug on right ps there is a tab to lift up before you pull plg use pliers to get off old coupling just keep unscrewing it till i catches good threads it will come off and put washers so you dont winde up back on to the striped part of the shaft. YOu rock price is good and the part
... Read mores are right thanks john belzner
Ask our experts a question about this part and we'll get back to you as soon as possible!
28 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
December 13, 2017
My glass shelves are fine but the plastic shelf holders are cracking. I just want to buy a replacement shelf without the glass insert. . Is this possible?
For model number MSD2572VEB01
Hi Gary, Thank you for the question. Very sorry but the glass and the frame to the shelf are not sold separately. Good luck with the repair!
38 people found this helpful.
Was this helpful?
Thank you for voting!
Nancy
February 21, 2019
My frame that holds the meat drawer has broken....what part will work...all sides are in pieces .....i see a “snack shelf” ...will that have the grooves in it for the meat drawer to slide in?
For model number Wrs325fdaw04
Hello Nancy, thank you for writing. The frame that holds the smaller meat drawer is Part Number: PS11751711. This has the grooves for the meat pan to slide into. I hope this helps!
17 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
August 15, 2019
Is part #17 the shelf that would be at the top or first one with multiple slots, it can be slid/placed into?Just want to be sure so i order the correct one is mine is cracked, it seems so from the diagram but i want to be sure its the correct one?
For model number KSRS22MWMS00
Good Day Paul. Thank you for your question in regards to your unit (Model Number KSRS22MWMS00). Based on our research Part # 17 (PS Number PS11751711). Based on our research, yes this shelf would be for the top part of your refrigerator. You can replace your old shelf with the new shelf by following these following steps: 1) If there is a snack drawer below the shelf, remove it by pulling forward and lifting up the rear. 2) Remove the old shelf by sliding it forward and lifting up. 3) Install the new shelf by sliding it in while holding up the front and then lower the front. 4) Once the new shelf is in place you can reinstall the drawer. Hope this helps! Best Regards.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Ed
January 13, 2018
I need the shelf with the snack bin below it. The picture suggests that the shelf is 18" wide (counting the grid squares). My shelf is 17 1/2" wide. What is the True width?When i looked on your web site the part number identified was: Ps11751711. Will it fit?
For model number ED5FHEXVQ01
Hi Ed,
Thank you for your question. This part is listed under your model number is designed to work with your appliance. The dimensions of the shelf are approximately 18 inches wide by 18 1/2 inches deep. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Ed
August 6, 2019
This is a Kenmore fridge . The shelf i'm looking for hold the meat shelf as well.The part # on the broken shelf is w10276340. Thanks for your help.
For model number 10657869801
Hello Ed, thank you for inquiring. This Snack Shelf Frame with Glass part number PS11751711 is the replacement you are looking for on your model. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Monica
February 27, 2020
I want to know if this part is for my fridge.
For model number ED2VHEXVB01
Good Day Monica. Thank you for your question in regards to your unit (Model Number ED2VHEXVB01). Based on our research, the PartSelect Number for the Refrigerator Shelf Frame with Glass that goes above the top drawer in your unit is PS11751711. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lauren
July 7, 2021
Will this part work to replace the wire shelf we currently have for this model of Amana refrigerator? Thanks!
For model number ART308FFDW07
Hello Lauren, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12711762. We hope this helps!
Hello Barb, thank you for your question. There are two pins that will slide into place, then the front of the shelf can be lowered and laid down on the shelf supports which are mounted on the inside of the fridge walls. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carolyn Griffith
November 17, 2019
I have this model in a Amana side by side, will it fit
For model number AS12575FRB
Hello Carolyn, thank you for inquiring. This Shelf Frame with Glass is not shown as compatible to your model refrigerator. The replacement for your model is part number PS11751713. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Delores
December 7, 2019
I need the shelf directly below top shelf, which do I need to order 16 or 17?
For model number WRS322FDAB01
Hi Delores, I believe this would be part PS11769897 with glass PS11731733. I would call the manufacturer to make sure as the diagram is not completely clear. Thank you for your question and good luck with your repair!
